1. 技术文章
  2. How to set cornerRadius for only top-left and top-right corner of a UIView?

How to set cornerRadius for only top-left and top-right corner of a UIView?

由 感情迁移 提交于 2019-11-25 22:48:18

问题


Is there a way to set cornerRadius for only top-left and top-right corner of a UIView?

I tried the following, but it end up not seeing the view anymore.

UIView *view = [[UIView alloc] initWithFrame:frame];

CALayer *layer = [CALayer layer];
UIBezierPath *shadowPath = [UIBezierPath bezierPathWithRoundedRect:frame byRoundingCorners:(UIRectCornerTopLeft|UIRectCornerTopRight) cornerRadii:CGSizeMake(3.0, 3.0)];
layer.shadowPath = shadowPath.CGPath;
view.layer.mask = layer;

回答1:


Swift 4

Pay attention to the fact that if you have layout constraints attached to it, you must refresh this as follows in your UIView subclass:

override func layoutSubviews() {
    super.layoutSubviews()
    roundCorners(corners: [.topLeft, .topRight], radius: 3.0)
}

If you don't do that it won't show up.

And to round corners, use the extension:

extension UIView {
   func roundCorners(corners: UIRectCorner, radius: CGFloat) {
        let path = UIBezierPath(roundedRect: bounds, byRoundingCorners: corners, cornerRadii: CGSize(width: radius, height: radius))
        let mask = CAShapeLayer()
        mask.path = path.cgPath
        layer.mask = mask
    }
}



回答2:


I am not sure why your solution did not work but the following code is working for me. Create a bezier mask and apply it to your view. In my code below I was rounding the bottom corners of the _backgroundView with a radius of 3 pixels. self is a custom UITableViewCell:

UIBezierPath *maskPath = [UIBezierPath
    bezierPathWithRoundedRect:self.backgroundImageView.bounds
    byRoundingCorners:(UIRectCornerBottomLeft | UIRectCornerBottomRight)
    cornerRadii:CGSizeMake(20, 20)
];

CAShapeLayer *maskLayer = [CAShapeLayer layer];

maskLayer.frame = self.bounds;
maskLayer.path = maskPath.CGPath;

self.backgroundImageView.layer.mask = maskLayer;

Swift version with some improvements:

let path = UIBezierPath(roundedRect:viewToRound.bounds, byRoundingCorners:[.TopRight, .BottomLeft], cornerRadii: CGSizeMake(20, 20))
let maskLayer = CAShapeLayer()

maskLayer.path = path.CGPath
viewToRound.layer.mask = maskLayer

Swift 3.0 version:

let path = UIBezierPath(roundedRect:viewToRound.bounds,
                        byRoundingCorners:[.topRight, .bottomLeft],
                        cornerRadii: CGSize(width: 20, height:  20))

let maskLayer = CAShapeLayer()

maskLayer.path = path.cgPath
viewToRound.layer.mask = maskLayer

Swift extension here




回答3:


Here is a Swift version of @JohnnyRockex answer

extension UIView {

    func roundCorners(_ corners: UIRectCorner, radius: CGFloat) {
         let path = UIBezierPath(roundedRect: self.bounds, byRoundingCorners: corners, cornerRadii: CGSize(width: radius, height: radius))
         let mask = CAShapeLayer()
         mask.path = path.cgPath
         self.layer.mask = mask
    }

}

view.roundCorners([.topLeft, .bottomRight], radius: 10)

Note

If you're using Auto Layout, you'll need to subclass your UIView and call roundCorners in the view's layoutSubviews for optimal effect.

class View: UIView {
    override func layoutSubviews() {
        super.layoutSubviews()

        self.roundCorners([.topLeft, .bottomLeft], radius: 10)
    }
}



回答4:


And finally… there is CACornerMask in iOS11! With CACornerMask it can be done pretty easy:

let view = UIView()
view.clipsToBounds = true
view.layer.cornerRadius = 10
view.layer.maskedCorners = [.layerMaxXMinYCorner, .layerMinXMinYCorner] // Top right corner, Top left corner respectively



回答5:


Swift code example here: https://stackoverflow.com/a/35621736/308315

Not directly. You will have to:

  1. Create a CAShapeLayer
  2. Set its path to be a CGPathRef based on view.bounds but with only two rounded corners (probably by using +[UIBezierPath bezierPathWithRoundedRect:byRoundingCorners:cornerRadii:])
  3. Set your view.layer.mask to be the CAShapeLayer



回答6:


Here is a short method implemented like this:

- (void)viewDidLoad {
    [super viewDidLoad];
    UIButton *openInMaps = [UIButton new];
    [openInMaps setFrame:CGRectMake(15, 135, 114, 70)];
    openInMaps = (UIButton *)[self roundCornersOnView:openInMaps onTopLeft:NO topRight:NO bottomLeft:YES bottomRight:NO radius:5.0];
}

- (UIView *)roundCornersOnView:(UIView *)view onTopLeft:(BOOL)tl topRight:(BOOL)tr bottomLeft:(BOOL)bl bottomRight:(BOOL)br radius:(float)radius {

    if (tl || tr || bl || br) {
        UIRectCorner corner = 0;
        if (tl) {corner = corner | UIRectCornerTopLeft;}
        if (tr) {corner = corner | UIRectCornerTopRight;}
        if (bl) {corner = corner | UIRectCornerBottomLeft;}
        if (br) {corner = corner | UIRectCornerBottomRight;}

        UIView *roundedView = view;
        UIBezierPath *maskPath = [UIBezierPath bezierPathWithRoundedRect:roundedView.bounds byRoundingCorners:corner cornerRadii:CGSizeMake(radius, radius)];
        CAShapeLayer *maskLayer = [CAShapeLayer layer];
        maskLayer.frame = roundedView.bounds;
        maskLayer.path = maskPath.CGPath;
        roundedView.layer.mask = maskLayer;
        return roundedView;
    }
    return view;
}



回答7:


In swift 4.1 and Xcode 9.4.1

In iOS 11 this single line is enough:

detailsSubView.layer.maskedCorners = [.layerMinXMinYCorner, .layerMaxXMinYCorner]//Set your view here

See the complete code:

//In viewDidLoad
if #available(iOS 11.0, *){
        detailsSubView.clipsToBounds = false
        detailsSubView.layer.cornerRadius = 10
        detailsSubView.layer.maskedCorners = [.layerMinXMinYCorner, .layerMaxXMinYCorner]
} else {
      //For lower versions
}

But for lower versions

let rectShape = CAShapeLayer()
    rectShape.bounds = detailsSubView.frame
    rectShape.position = detailsSubView.center
    rectShape.path = UIBezierPath(roundedRect: detailsSubView.bounds,    byRoundingCorners: [.topLeft , .topRight], cornerRadii: CGSize(width: 20, height: 20)).cgPath
    detailsSubView.layer.mask = rectShape

Complete code is.

if #available(iOS 11.0, *){
    detailsSubView.clipsToBounds = false
    detailsSubView.layer.cornerRadius = 10
    detailsSubView.layer.maskedCorners = [.layerMinXMinYCorner, .layerMaxXMinYCorner]
}else{
    let rectShape = CAShapeLayer()
    rectShape.bounds = detailsSubView.frame
    rectShape.position = detailsSubView.center
    rectShape.path = UIBezierPath(roundedRect: detailsSubView.bounds,    byRoundingCorners: [.topLeft , .topRight], cornerRadii: CGSize(width: 20, height: 20)).cgPath
    detailsSubView.layer.mask = rectShape
}

If you are using AutoResizing in storyboard write this code in viewDidLayoutSubviews().

override func viewDidLayoutSubviews() {
    super.viewDidLayoutSubviews()

    if #available(iOS 11.0, *){
        detailsSubView.clipsToBounds = false
        detailsSubView.layer.cornerRadius = 10
        detailsSubView.layer.maskedCorners = [.layerMinXMinYCorner, .layerMaxXMinYCorner]
    }else{
        let rectShape = CAShapeLayer()
        rectShape.bounds = detailsSubView.frame
        rectShape.position = detailsSubView.center
        rectShape.path = UIBezierPath(roundedRect: detailsSubView.bounds,    byRoundingCorners: [.topLeft , .topRight], cornerRadii: CGSize(width: 20, height: 20)).cgPath
        detailsSubView.layer.mask = rectShape
    }
}



回答8:


iOS 11 , Swift 4
And you can try this code: 

if #available(iOS 11.0, *) {
   element.clipsToBounds = true
   element.layer.cornerRadius = CORNER_RADIUS
   element.layer.maskedCorners = [.layerMaxXMaxYCorner]
} else {
   // Fallback on earlier versions
}

And you can using this in table view cell.




回答9:


Try this code,

UIBezierPath *maskPath = [UIBezierPath bezierPathWithRoundedRect:view.bounds byRoundingCorners:( UIRectCornerTopLeft | UIRectCornerTopRight) cornerRadii:CGSizeMake(5.0, 5.0)];

CAShapeLayer *maskLayer = [[CAShapeLayer alloc] init];
maskLayer.frame = self.view.bounds;
maskLayer.path  = maskPath.CGPath;

view.layer.mask = maskLayer;



回答10:


Emma: .TopRight and .BottomRight are not working for you perhaps because the call to view.roundCorners is done BEFORE final view bounds are calculated. Note that the Bezier Path derives from the view bounds at the time it is called. For example, if auto layout will narrow the view, the round corners on the right side might be outside the view. Try to call it in viewDidLayoutSubviews, where the view's bound is final.




回答11:


Swift 4 Swift 5 easy way in 1 line

Usage:

//MARK:- Corner Radius of only two side of UIViews
self.roundCorners(view: yourview, corners: [.bottomLeft, .topRight], radius: 12.0)

Function:

//MARK:- Corner Radius of only two side of UIViews
func roundCorners(view :UIView, corners: UIRectCorner, radius: CGFloat){
        let path = UIBezierPath(roundedRect: view.bounds, byRoundingCorners: corners, cornerRadii: CGSize(width: radius, height: radius))
        let mask = CAShapeLayer()
        mask.path = path.cgPath
        view.layer.mask = mask
}



回答12:


Swift 4

extension UIView {

    func roundTop(radius:CGFloat = 5){
        self.clipsToBounds = true
        self.layer.cornerRadius = radius
        if #available(iOS 11.0, *) {
            self.layer.maskedCorners = [.layerMaxXMinYCorner, .layerMinXMinYCorner]
        } else {
            // Fallback on earlier versions
        }
    }

    func roundBottom(radius:CGFloat = 5){
        self.clipsToBounds = true
        self.layer.cornerRadius = radius
        if #available(iOS 11.0, *) {
            self.layer.maskedCorners = [.layerMaxXMaxYCorner, .layerMinXMaxYCorner]
        } else {
            // Fallback on earlier versions
        }
    }
}



回答13:


A way to do this programmatically would be to create a UIView over the top part of the UIView that has the rounded corners. Or you could hide the top underneath something.




回答14:


    // Create the path (with only the top-left corner rounded)
UIBezierPath *maskPath = [UIBezierPath bezierPathWithRoundedRect:view.bounds 
                           byRoundingCorners:(UIRectCornerBottomLeft | UIRectCornerBottomRight) 
                           cornerRadii:CGSizeMake(7.0, 7.0)];

// Create the shape layer and set its path
CAShapeLayer *maskLayer = [CAShapeLayer layer];
maskLayer.frame = cell.stripBlackImnageView.bounds;
maskLayer.path = maskPath.CGPath; 
// Set the newly created shapelayer as the mask for the image view's layer
view.layer.mask = maskLayer;



回答15:


All of the answers already given are really good and valid (especially Yunus idea of using the mask property).

However I needed something a little more complex because my layer could often change sizes which mean I needed to call that masking logic every time and this was a little bit annoying.

I used swift extensions and computed properties to build a real cornerRadii property which takes care of auto updating the mask when layer is layed out.

This was achieved using Peter Steinberg great Aspects library for swizzling.

Full code is here:

extension CALayer {
  // This will hold the keys for the runtime property associations
  private struct AssociationKey {
    static var CornerRect:Int8 = 1    // for the UIRectCorner argument
    static var CornerRadius:Int8 = 2  // for the radius argument
  }

  // new computed property on CALayer
  // You send the corners you want to round (ex. [.TopLeft, .BottomLeft])
  // and the radius at which you want the corners to be round
  var cornerRadii:(corners: UIRectCorner, radius:CGFloat) {
    get {
      let number = objc_getAssociatedObject(self, &AssociationKey.CornerRect)  as? NSNumber ?? 0
      let radius = objc_getAssociatedObject(self, &AssociationKey.CornerRadius)  as? NSNumber ?? 0
      return (corners: UIRectCorner(rawValue: number.unsignedLongValue), radius: CGFloat(radius.floatValue))
    }
    set (v) {
      let radius = v.radius
      let closure:((Void)->Void) = {
        let path = UIBezierPath(roundedRect: self.bounds, byRoundingCorners: v.corners, cornerRadii: CGSize(width: radius, height: radius))
        let mask = CAShapeLayer()
        mask.path = path.CGPath
        self.mask = mask
      }
      let block: @convention(block) Void -> Void = closure
      let objectBlock = unsafeBitCast(block, AnyObject.self)
      objc_setAssociatedObject(self, &AssociationKey.CornerRect, NSNumber(unsignedLong: v.corners.rawValue), .OBJC_ASSOCIATION_RETAIN)
      objc_setAssociatedObject(self, &AssociationKey.CornerRadius, NSNumber(float: Float(v.radius)), .OBJC_ASSOCIATION_RETAIN)
      do { try aspect_hookSelector("layoutSublayers", withOptions: .PositionAfter, usingBlock: objectBlock) }
      catch _ { }
    }
  }
}

I wrote a simple blog post explaining this.




回答16:


The easiest way would be to make a mask with a rounded corner layer.

CALayer *maskLayer = [CALayer layer];
maskLayer.frame = CGRectMake(0,0,maskWidth ,maskHeight);
maskLayer.contents = (__bridge id)[[UIImage imageNamed:@"maskImageWithRoundedCorners.png"] CGImage];

aUIView.layer.mask = maskLayer;

And don't forget to: 

#import <QuartzCore/QuartzCore.h>



回答17:


This is how you can set a corner radius for each corner of a button with Xamarin in C#:

var maskPath = UIBezierPath.FromRoundedRect(MyButton.Bounds, UIRectCorner.BottomLeft | UIRectCorner.BottomRight,
    new CGSize(10.0, 10.0));
var maskLayer = new CAShapeLayer
{
    Frame = MyButton.Bounds,
    Path = maskPath.CGPath
};
MyButton.Layer.Mask = maskLayer;



回答18:


A lovely extension to reuse Yunus Nedim Mehel solution

Swift 2.3

extension UIView {
func roundCornersWithLayerMask(cornerRadii: CGFloat, corners: UIRectCorner) {
    let path = UIBezierPath(roundedRect: bounds,
                            byRoundingCorners: corners,
                            cornerRadii: CGSize(width: cornerRadii, height: cornerRadii))
    let maskLayer = CAShapeLayer()
    maskLayer.path = path.CGPath
    layer.mask = maskLayer
} }

Usage

let view = UIView()
view.roundCornersWithLayerMask(10,[.TopLeft,.TopRight])



回答19:


After change bit of code @apinho In swift 4.3 working fine

extension UIView {
func roundCornersWithLayerMask(cornerRadii: CGFloat, corners: UIRectCorner) {
    let path = UIBezierPath(roundedRect: bounds,
                            byRoundingCorners: corners,
                            cornerRadii: CGSize(width: cornerRadii, height: cornerRadii))
    let maskLayer = CAShapeLayer()
    maskLayer.path = path.cgPath
    layer.mask = maskLayer
  }
}

To use this function for you view 

YourViewName. roundCornersWithLayerMask(cornerRadii: 20,corners: [.topLeft,.topRight])



回答20:


If you're looking for an interface builder only solution there is one for iOS 11 and higher. See my answer here: https://stackoverflow.com/a/58626264




回答21:


Another version of Stephane's answer.

import UIKit

    class RoundCornerView: UIView {
    var corners : UIRectCorner = [.topLeft,.topRight,.bottomLeft,.bottomRight]
        var roundCornerRadius : CGFloat = 0.0
        override func layoutSubviews() {
            super.layoutSubviews()
            if corners.rawValue > 0 && roundCornerRadius > 0.0 {
                self.roundCorners(corners: corners, radius: roundCornerRadius)
            }
        }
        private func roundCorners(corners: UIRectCorner, radius: CGFloat) {
            let path = UIBezierPath(roundedRect: bounds, byRoundingCorners: corners, cornerRadii: CGSize(width: radius, height: radius))
            let mask = CAShapeLayer()
            mask.path = path.cgPath
            layer.mask = mask
        }

    }



回答22:


In Swift 4.2, Create it via @IBDesignable like this:

@IBDesignable

class DesignableViewCustomCorner: UIView {

    @IBInspectable var cornerRadious: CGFloat = 0 {
        didSet {
            let path = UIBezierPath(roundedRect: self.bounds, byRoundingCorners: [.topLeft, .topRight], cornerRadii: CGSize(width: cornerRadious, height: cornerRadious))
            let mask = CAShapeLayer()
            mask.path = path.cgPath
            self.layer.mask = mask
        }
    }

}


来源：https://stackoverflow.com/questions/10167266/how-to-set-cornerradius-for-only-top-left-and-top-right-corner-of-a-uiview

标签
ios
cocoa-touch
uiview
cornerradius
易学教程内所有资源均来自网络或用户发布的内容，如有违反法律规定的内容欢迎反馈！
该文章没有解决你所遇到的问题?点击提问,说说你的问题,让更多的人一起探讨吧!