问题
I have to build a Base Converter in 8086 assembly .
The user has to choose his based and then put a number, after then , the program will show him his number in 3 more bases[he bring a decimal number, and after this he will see his number in hex, oct, and bin.
This first question is, how can I convert the number he gave me, from string, to a number?
the sec question is, how can i convert? by RCR, and then adc some variable?
Here is my code:
data segment
N=8
ERROR_STRING_BASE DB ,10,13, " THIS IS NOT A BASE!",10,13, " TRY AGINE" ,10,13," $"
OPENSTRING DB " Welcome, to the Base Convertor",10,13," Please enter your base to convert from:",10,13," <'H'= Hex, 'D'=Dec, 'O'=oct, 'B'=bin>: $"
Hex_string DB "(H)" ,10,13, "$"
Octalic_string DB "(O) ",10,13, "$"
Binar_string DB "(B)",10,13, "$"
Dece_string DB "(D)",10,13, "$"
ENTER_STRING DB ,10,13, " Now, Enter Your Number (Up to 4 digits) ",10,13, "$"
Illegal_Number DB ,10,13, " !!! This number is illegal, lets Start again" ,10,13,"$"
BASED_BUFFER DB N,?,N+1 DUP(0)
Number_buffer db N, ? ,N+1 DUP(0)
TheBase DB N DUP(0)
The_numer DB N DUP(0)
The_binNumber DB 16 DUP(0)
data ends
sseg segment stack
dw 128 dup(0)
sseg ends
code segment
assume ss:sseg,cs:code,ds:data
start: mov ax,data
mov ds,ax
MOV DX,OFFSET OPENSTRING ;PUTS THE OPENING SRTING
MOV AH,9
INT 21H
call EnterBase
CALL CheckBase
HEXBASE: CALL PRINTtheNUMBER
MOV DX,OFFSET Hex_string
MOV AH,9
INT 21h
JMP I_have_the_numberH
oCTALICbASE: CALL PRINTtheNUMBER
MOV DX,OFFSET Octalic_string
MOV AH,9
INT 21h
JMP I_have_the_numberO
BINBASE:CALL PRINTtheNUMBER
MOV DX,OFFSET Binar_string
MOV AH,9
INT 21h
JMP I_have_the_numberB
DECBASE: CALL PRINTtheNUMBER
MOV DX,OFFSET Dece_string
MOV AH,9
INT 21h
JMP I_have_the_numberD
I_have_the_numberH: CALL BINcalculation
CALL OCTcalculation
CALL DECcalculation
I_have_the_numberO: CALL BINcalculation
CALL DECcalculation
CALL HEXcalculation
I_have_the_numberB: CALL OCTcalculation
CALL DECcalculation
CALL HEXcalculation
I_have_the_numberD: CALL BINcalculation
CALL OCTcalculation
CALL HEXcalculation
exit: mov ax, 4c00h
int 21h
EnterBase PROC
MOV DX,OFFSET BASED_BUFFER ; GETS THE BASE
MOV AH,10
INT 21H
LEA DX,BASED_BUFFER[2]
MOV BL,BASED_BUFFER[1]
MOV BH,0
MOV BASED_BUFFER[BX+2],0
LEA SI, BASED_BUFFER[2]
XOR CX, CX
MOV CL, BASED_BUFFER[1]
LEA DI, TheBase
LOL_OF_BASE: MOV DL, [SI]
MOV [DI], DL
INC SI
INC DI
INC AL
RET
EnterBase ENDP
CheckBase proc
CMP TheBase,'H'
JE HEXBASE
CMP TheBase,'h'
JE HEXBASE
CMP TheBase,'O'
JE oCTALICbASE
CMP TheBase,'o'
JE oCTALICbASE
CMP TheBase,'B'
JE BINBASE
CMP TheBase,'b'
JE BINBASE
CMP TheBase,'D'
JE DECBASE
CMP TheBase,'d'
JE DECBASE
CMP TheBase, ' '
je ERRORoFBASE
ERRORoFBASE: MOV DX,OFFSET ERROR_STRING_BASE ;PUTS WORNG BASE Illegal_Number
MOV AH,9
INT 21H
JMP START
CheckBase ENDP
PRINTtheNUMBER PROC
MOV DX,OFFSET ENTER_STRING
MOV AH,9
INT 21h
MOV DX,OFFSET Number_buffer ; GETS THE number
MOV AH,10
INT 21H
LEA DX,Number_buffer[2]
MOV BL,Number_buffer[1]
MOV BH,0
MOV Number_buffer[BX+2],0
LEA SI, Number_buffer[2]
XOR CX, CX
MOV CL, Number_buffer[1]
LEA DI, The_numer
xor AL,AL
LOL_OF_NUMBER_CHECK: MOV DL, [SI]
MOV [DI], DL
INC SI
INC DI
INC AL
CMP AL,5
JE ERRORofNUMBER
LOOP LOL_OF_NUMBER_CHECK
RET
ERRORofNUMBER: MOV DX,OFFSET Illegal_Number ;PUTS WORNG BASE Illegal_Number
MOV AH,9
INT 21H
JMP START
PRINTtheNUMBER ENDP
PROC BINcalculation
XOR CX,CX
XOR AX,AX
MOV CX,4
MOV AX,16
LEA SI, The_binNumber[0]
TheBinarLoop: RCL The_numer,1
ADC [SI],0
INC SI
LOOP TheBinarLoop
ENDP
PROC OCTcalculation
ENDP
PROC DECcalculation
ENDP
PROC HEXcalculation
ENDP
code ends
end start
It should be look like this:
thanks!
שלו לוי
回答1:
the algorighm to decode ascii strings from ANY base to integer is the same:
result = 0
for each digit in ascii-string
result *= base
result += value(digit)
for { bin, oct, dec } value(digit) is ascii(digit)-ascii('0')
hex is a bit more complicated, you have to check if the value is 'a'-'f', and convert this to 10-15
converting integer to ascii(base x) is similar, you have to divide the value by base until it's 0, and add ascii representation of the remainder at the left
e.g. 87/8= 10, remainder 7 --> "7"
10/8= 1, remainder 2 --> "27"
1/8= 0, remainder 1 --> "127"
回答2:
Copy-paste next little program in EMU8086 and run it : it will capture a number as string from keyboard, then convert it to numeric in BX. To store the number in "The_numer", you have to do mov The_numer, bl :
.stack 100h
;------------------------------------------
.data
;------------------------------------------
msj1 db 'Enter a number: $'
msj2 db 13,10,'Number has been converted',13,10,13,10,'$'
string db 5 ;MAX NUMBER OF CHARACTERS ALLOWED (4).
db ? ;NUMBER OF CHARACTERS ENTERED BY USER.
db 5 dup (?) ;CHARACTERS ENTERED BY USER.
;------------------------------------------
.code
;INITIALIZE DATA SEGMENT.
mov ax, @data
mov ds, ax
;------------------------------------------
;DISPLAY MESSAGE.
mov ah, 9
mov dx, offset msj1
int 21h
;------------------------------------------
;CAPTURE CHARACTERS (THE NUMBER).
mov ah, 0Ah
mov dx, offset string
int 21h
;------------------------------------------
call string2number
;------------------------------------------
;DISPLAY MESSAGE.
mov ah, 9
mov dx, offset msj2
int 21h
;------------------------------------------
;STOP UNTIL USER PRESS ANY KEY.
mov ah,7
int 21h
;------------------------------------------
;FINISH THE PROGRAM PROPERLY.
mov ax, 4c00h
int 21h
;------------------------------------------
;CONVERT STRING TO NUMBER IN BX.
proc string2number
;MAKE SI TO POINT TO THE LEAST SIGNIFICANT DIGIT.
mov si, offset string + 1 ;<================================ YOU CHANGE THIS VARIABLE.
mov cl, [ si ] ;NUMBER OF CHARACTERS ENTERED.
mov ch, 0 ;CLEAR CH, NOW CX==CL.
add si, cx ;NOW SI POINTS TO LEAST SIGNIFICANT DIGIT.
;CONVERT STRING.
mov bx, 0
mov bp, 1 ;MULTIPLE OF 10 TO MULTIPLY EVERY DIGIT.
repeat:
;CONVERT CHARACTER.
mov al, [ si ] ;CHARACTER TO PROCESS.
sub al, 48 ;CONVERT ASCII CHARACTER TO DIGIT.
mov ah, 0 ;CLEAR AH, NOW AX==AL.
mul bp ;AX*BP = DX:AX.
add bx,ax ;ADD RESULT TO BX.
;INCREASE MULTIPLE OF 10 (1, 10, 100...).
mov ax, bp
mov bp, 10
mul bp ;AX*10 = DX:AX.
mov bp, ax ;NEW MULTIPLE OF 10.
;CHECK IF WE HAVE FINISHED.
dec si ;NEXT DIGIT TO PROCESS.
loop repeat ;COUNTER CX-1, IF NOT ZERO, REPEAT.
ret
endp
The proc you need is string2number. Pay attention inside the proc : it uses a variable named "string", you have to change it by the name of your own variable. After the call the result is in BX: if the number is less than 256, you can use the number in BL.
By the way, the string is ALWAYS converted to a DECIMAL number.
来源：https://stackoverflow.com/questions/36979870/how-to-convert-string-to-number-in-8086-assembly