How to improve query performance (using explain command results f.e.)

问题

I'm currently running this query. However, when run outside phpMyAdmin it causes a 504 timeout error. I'm thinking it has to do with how efficient the number of rows is returned or accessed by the query.

I'm not extremely experienced with MySQL and so this was the best I could do:

SELECT
                    s.surveyId,
                    q.cat,
                    SUM((sac.answer_id*q.weight))/SUM(q.weight) AS score,
                    user.division_id,
                    user.unit_id,
                    user.department_id,
                    user.team_id,
                    division.division_name,
                    unit.unit_name,
                    dpt.department_name,
                    team.team_name
                FROM survey_answers_cache sac
                    JOIN surveys s ON s.surveyId = sac.surveyid
                    JOIN subcluster sc ON s.subcluster_id = sc.subcluster_id
                    JOIN cluster c ON sc.cluster_id = c.cluster_id
                    JOIN user ON user.user_id = sac.user_id
                    JOIN questions q ON q.question_id = sac.question_id
                    JOIN division ON division.division_id = user.division_id
                    LEFT JOIN unit ON unit.unit_id = user.unit_id
                    LEFT JOIN department dpt ON dpt.department_id = user.department_id
                    LEFT JOIN team ON team.team_id = user.team_id
                WHERE c.cluster_id=? AND sc.subcluster_id=? AND s.active=0 AND s.prepare=0
                GROUP BY user.team_id, s.surveyId, q.cat
                ORDER BY s.surveyId, user.team_id, q.cat ASC

The problem I get with this query is that when I get a correct result returned it runs quickly (let's say +-500ms) but when the result has twice as much rows, it takes more than 5 minutes and then causes a 504 timeout. The other problem is that I didn't create this database myself, so I didn't set the indices myself. I'm thinking of improving these and therefore I used the explain command:

I see a lot of primary keys and a couple double indices, but I'm not sure if this would affect the performance this greatly.

EDIT: This piece of code takes up all the execution time:

$start_time = microtime(true);
$stmt = $conn->query($query); //query is simply the query above.
while ($row = $stmt->fetch_assoc()){
    $resultSurveys["scores"][] = $row;
}
$stmt->close();
$end_time = microtime(true);
$duration = $end_time - $start_time; //value typically the execution time #reallyHigh...

So my question: Is it possible to (greatly?) improve the performance of the query by altering the database keys or should I divide my query into multiple smaller queries?

回答1:

The EXPLAIN result is showing signs of problem

Using temporary;using filesort: the ORDER BY needs to create temporary tables to do the sorting.

On 3rd row for user table type is ALL, key and ref are NULL: means that it needs to scan the whole table each time to retrieve results.

Suggestions:

add indexes on user.cluster_id and all fields involved on the ORDER BY and GROUP by clauses. Keep in mind that user table seems to be under changein database (cross database query).
Add indexes on user columns involved on JOINs.
Add index to s.survey_id
If possible, keep the same sequence for GROUP BY and ORDER BY clauses
According to the accepted answer in this question move the JOIN on user table to the first position in the join queue.
Carefully read this official documentation. You may need to optimize the server configuration.

PS: query optimization is an art that requires patience and hard work. No silver bullet for that. Welcome to the fine art of optimizing MySQL!

回答2:

You can try something like this ( although its not practical for me to test this )

SELECT
    sac.surveyId,
    q.cat,
    SUM((sac.answer_id*q.weight))/SUM(q.weight) AS score,
    user.division_id,
    user.unit_id,
    user.department_id,
    user.team_id,
    division.division_name,
    unit.unit_name,
    dpt.department_name,
    team.team_name
FROM survey_answers_cache sac
    JOIN
    (
        SELECT
            s.surveyId,
            sc.subcluster_id
        FROM
            surveys s
            JOIN subcluster sc ON s.subcluster_id = sc.subcluster_id
            JOIN cluster c ON sc.cluster_id = c.cluster_id
        WHERE
            c.cluster_id=? AND sc.subcluster_id=? AND s.active=0 AND s.prepare=0
    ) AS v ON v.surveyid = sac.surveyid
    JOIN user ON user.user_id = sac.user_id
    JOIN questions q ON q.question_id = sac.question_id
    JOIN division ON division.division_id = user.division_id
    LEFT JOIN unit ON unit.unit_id = user.unit_id
    LEFT JOIN department dpt ON dpt.department_id = user.department_id
    LEFT JOIN team ON team.team_id = user.team_id
GROUP BY user.team_id, v.surveyId, q.cat
ORDER BY v.surveyId, user.team_id, q.cat ASC

So I hope I didn't mess anything up.

Anyway, the idea is in the inner query you select only the rows you need based on your where condition. This will create a smaller tmp table as it only pulls 2 fields both ints.

Then in the outer query you join to the tables that you actually pull the rest of the data from, order and group. This way you are sorting and grouping on a smaller dataset. And your where clause can run in the most optimal way.

You may even be able to omit some of these tables as your only pulling data from a few of them, but without seeing the full schema and how it's related that's hard to say.

But just generally speaking this part (The sub-query)

SELECT
    s.surveyId,
    sc.subcluster_id
FROM
    surveys s
    JOIN subcluster sc ON s.subcluster_id = sc.subcluster_id
    JOIN cluster c ON sc.cluster_id = c.cluster_id
WHERE
    c.cluster_id=? AND sc.subcluster_id=? AND s.active=0 AND s.prepare=0

Is what is directly affected by your WHERE clause. See so we can optimize this part then use it to join the rest of the data you need.

An example of removing tables can be easily deduced from the above, consider this

SELECT
    s.surveyId,
    sc.subcluster_id
FROM
    surveys s
    JOIN subcluster sc ON s.subcluster_id = sc.subcluster_id
WHERE
    sc.cluster_id=? AND sc.subcluster_id=? AND s.active=0 AND s.prepare=0

The c table cluster is never used to pull data from, only for the where. So is not

    JOIN cluster c ON sc.cluster_id = c.cluster_id
 WHERE
    c.cluster_id=?

The same as or equivalent to

WHERE
    sc.cluster_id=?

And therefore we can eliminate that join completely.

回答3:

i think the problem happends when you add this:

JOIN user ON user.cluster_id = sc.subcluster_id 
JOIN survey_answers_cache sac ON (sac.surveyId = s.surveyId AND sac.user_id = user.user_id)

the extra condition sac.user_id = user.user_id can be easily not consistent.

Can you try do a second join with user table?

pd. can you add a "SHOW CREATE TABLE"

来源：https://stackoverflow.com/questions/48453438/how-to-improve-query-performance-using-explain-command-results-f-e

标签

php

mysql

performance

http-status-code-504