Adding intrinsics using an LLVM pass

问题

I've added an intrinsic to an input code using an LLVM pass. I'm able to see the intrinsic call, yet I can't figure out how to compile the code to my target architecture (x86_64). I'm running the following command:

clang++ $(llvm-config --ldflags --libs all) ff.s -o foo

But the linker complains about undefined references:

/tmp/ff-2ada42.o: In function `fact(unsigned int)':
/home/rubens/Desktop/ff.cpp:9: undefined reference to `llvm.x86.sse3.mwait.i32.i32'
/tmp/ff-2ada42.o: In function `fib(unsigned int)':
/home/rubens/Desktop/ff.cpp:16: undefined reference to `llvm.x86.sse3.mwait.i32.i32'
/home/rubens/Desktop/ff.cpp:16: undefined reference to `llvm.x86.sse3.mwait.i32.i32'
/home/rubens/Desktop/ff.cpp:16: undefined reference to `llvm.x86.sse3.mwait.i32.i32'

Despite using ldflags from llvm-config, the compilation does not proceed. Any ideas on what should be done for the code to compile properly?

To generate the assembly code, I've done the following:

# Generating optimized code
clang++ $(llvm-config --cxxflags) -emit-llvm -c ff.cpp -o ff.bc
opt ff.bc -load path/to/mypass.so -mypass > opt_ff.bc

# Generating assembly
llc opt_ff.bc -o ff.s

I'm currently using llvm version 3.4.2; clang version 3.4.2 (tags/RELEASE_34/dot2-final); gcc version 4.9.2 (GCC); and Linux 3.17.2-1-ARCH x86_64.

---

Edit: adding the IR with the intrinsic:

File ~/llvm/include/llvm/IR/IntrinsicsX86.td:

...
589 // Thread synchronization ops.                                          
590 let TargetPrefix = "x86" in {  // All intrinsics start with "llvm.x86.".
591     def int_x86_sse3_monitor : GCCBuiltin<"__builtin_ia32_monitor">,      
592               Intrinsic<[], [llvm_ptr_ty,                               
593                          llvm_i32_ty, llvm_i32_ty], []>;                
594     def int_x86_sse3_mwait : GCCBuiltin<"__builtin_ia32_mwait">,          
595               Intrinsic<[], [llvm_i32_ty,                               
596                          llvm_i32_ty], []>;                             
597 }                                                                       
...

And calls (from file ff.s):

...
.Ltmp2:                                       
    callq   llvm.x86.sse3.mwait.i32.i32   
    movl    $_ZStL8__ioinit, %edi         
    callq   _ZNSt8ios_base4InitC1Ev       
    movl    $_ZNSt8ios_base4InitD1Ev, %edi
    movl    $_ZStL8__ioinit, %esi         
    movl    $__dso_handle, %edx           
    callq   __cxa_atexit                  
    popq    %rax                          
    ret                                   
...

---

Edit 2: Here's how I'm adding the intrinsic during the opt pass:

Function *f(bb->getParent());
Module *m(f->getParent());

std::vector<Type *> types(2, Type::getInt32Ty(getGlobalContext()));
Function *mwait = Intrinsic::getDeclaration(m, Intrinsic::x86_sse3_mwait, types);

std::vector<Value *> args;
IRBuilder<> builder(&bb->front());
for (uint32_t i : {1, 2}) args.push_back(builder.getInt32(i));

ArrayRef<Value *> args_ref(args);
builder.CreateCall(mwait, args_ref);

回答1:

EDIT: I am currently writing an LLVM pass that is basicaly doing what you tried to do in this question. The problem with your code is the following:

std::vector<Type *> types(2, Type::getInt32Ty(getGlobalContext()));
Function *mwait = Intrinsic::getDeclaration(m, Intrinsic::x86_sse3_mwait, types);

You are trying to get the deceleration for an Intrinsic function with the name llvm.x86.sse3.mwait.i32.i32 and this Intrinsic does not exist. However, llvm.x86.sse3.mwait exists and therefor you have to write this:

Function *mwait = Intrinsic::getDeclaration(m, Intrinsic::x86_sse3_mwait);

notice the missing type argument to the call. This is because llvm.x86.sse3.mwait has no overloadings.

I hope you figured it out in the meantime.

---

Ok since I want be able to answer you for a while here is a wild guess answer.

The problem is the way you add the intrinsic through your optimizer pass. It looks like you are just creating a function with the same name as the intrinsic not the intrinsic itself.

Here is a little C++ code that just uses the clang built-in to get the intrinsic inside the IR (I use clang 3.5 but this should not have any impact).

int main ()
{
    __builtin_ia32_mwait(4,2);
}

Compiling it with clang -emit-llvm -S I get:

; ModuleID = 'intrin.cpp'
target datalayout = "e-m:e-i64:64-f80:128-n8:16:32:64-S128"
target triple = "x86_64-unknown-linux-gnu"

; Function Attrs: nounwind uwtable
define i32 @main() #0 {
  call void @llvm.x86.sse3.mwait(i32 4, i32 2)
  ret i32 0
}

; Function Attrs: nounwind
declare void @llvm.x86.sse3.mwait(i32, i32) #1

attributes #0 = { nounwind uwtable "less-precise-fpmad"="false" "no-frame-pointer-elim"="true" "no-frame-pointer-elim-non-leaf" "no-infs-fp-math"="false" "no-nans-fp-math"="false" "stack-protector-buffer-size"="8" "unsafe-fp-math"="false" "use-soft-float"="false" }
attributes #1 = { nounwind }

!llvm.ident = !{!0}

!0 = metadata !{metadata !"clang version 3.5.0 "}

Please not that the SSE3 intrinsic has no type overloads like in your version.

Using llc on the generated file provides me:

.Ltmp2:
        .cfi_def_cfa_register %rbp
        movl    $4, %ecx
        movl    $2, %eax
        mwait
        xorl    %eax, %eax
        popq    %rbp
        retq

Proper assembly was created.

So I assume the way you are introducing the intrinsic into the function is wrong in your opt pass.

Get the intrinsic function and call it:

vector<Type*> types;
types.push_back(IntegerType::get(/*LLVM context*/, 32));
types.push_back(IntegerType::get(/*LLVM context*/, 32));

Function* func = Intrinsic::getDeclaration(/* module */, Intrinsic::x86_sse3_mwait, types);
CallInst* call = CallInst::Create(func, /* arguments */);

来源：https://stackoverflow.com/questions/27569967/adding-intrinsics-using-an-llvm-pass