Calling function in injected DLL

问题

I want to call a function in a remote process of an injected DLL that I've made.

I have successfully injected my DLL with:

CreateRemoteThread(pHandle, NULL, 0, (LPTHREAD_START_ROUTINE)GetProcAddress(GetModuleHandle("kernel32"), "LoadLibraryA"), pLibRemote, 0, NULL);

The DllMain is executed and the DLL is running in a stand-by mode. What I would like to do is somehow call the remotely loaded DLL in order to do some work.

I have tried exporting the function like this:

extern "C" __declspec(dllexport) void MyFunc(void)

and then executing the function like this:

CreateRemoteThread(pHandle, NULL, 0, (LPTHREAD_START_ROUTINE)GetProcAddress(GetModuleHandle("mydll"), "MyFunc"), NULL, 0, NULL);

but it results in a crash.

How can I solve this?

回答1:

Calling GetModuleHandle as you have will get the base of the DLL as it is mapped into your process (if at all). So what you need to do is first make sure to export the function in the DLL. You can do as you have done or create a .def file as shown here. Thereafter:

In Theory

Inject the DLL to the target process and get the base address it was loaded at
Inject the DLL to the current process. Use GetProcAddress to find the offset between the exported function and the base of the DLL.
Add this offset to the base address obtained from step 1. CreateRemoteThread at this location.

In Practice

When doing your DLL injection, it is possible for you to get the base that your DLL is loaded into the target.

HMODULE hInjected;

hThread = CreateRemoteThread( hProcess, NULL, 0,
      (LPTHREAD_START_ROUTINE)( GetProcAddress( hMod,
      "LoadLibraryW" ) ), lpAddress, 0, NULL );

// Locate address our payload was loaded
if( hThread != 0 ) {
  WaitForSingleObject( hThread, INFINITE );
  GetExitCodeThread( hThread, ( LPDWORD )&hInjected );
  CloseHandle( hThread );
}

hInjected will be the base of the injected DLL. I then have another function:

void* GetPayloadExportAddr( LPCWSTR lpPath, HMODULE hPayloadBase, LPCSTR lpFunctionName ) {
  // Load payload in our own virtual address space
  HMODULE hLoaded = LoadLibrary( lpPath );

  if( hLoaded == NULL ) {
    return NULL;
  } else {
    void* lpFunc   = GetProcAddress( hLoaded, lpFunctionName );
    DWORD dwOffset = (char*)lpFunc - (char*)hLoaded;

    FreeLibrary( hLoaded );
    return (DWORD)hPayloadBase + dwOffset;
  }
}

What this does is first load the payload into our own virtual address space. Afterwards, we can use GetProcAddress to get the address of the exported function. From this, we can get the offset of the function from the base of the DLL. Adding this offset to the hInjected we got earlier will tell us where the CreateRemoteThread call should be made. So you could make a call like so:

BOOL InitPayload( HANDLE hProcess, LPCWSTR lpPath, HMODULE hPayloadBase, HWND hwndDlg ) {
  void* lpInit = GetPayloadExportAddr( lpPath, hPayloadBase, "Init" );
  if( lpInit == NULL ) {
    return FALSE;
  } else {
    HANDLE hThread = CreateRemoteThread( hProcess, NULL, 0,
        lpInit, hwndDlg, 0, NULL );

    if( hThread == NULL ) {
      return FALSE;
    } else {
      CloseHandle( hThread );
    }
  }

  return TRUE;
}

This is all code that is ripped out of an old project I have. You're welcome to take the code and do whatever you want with it but I know if I were to rewrite the code now, I would do a lot of things differently.

回答2:

Mike's answer works if you are injecting a 32bit DLL into a 32bit process.

If you want to inject a 64bit DLL into a 64bit process, you can't get the base address of the DLL from GetExitCodeThread since it will only give you the lower 32bits of the 64bit address.

To get the correct address in this case, you must write a block of code into the process that calls LoadLibrary (storing the result at a specific location in process memory), execute this block of code (using CreateRemoteThread), and then read back the address from that location using ReadProcessMemory.

You can find more details for this here (including PowerShell and ASM code) here: http://clymb3r.wordpress.com/2013/05/26/implementing-remote-loadlibrary-and-remote-getprocaddress-using-powershell-and-assembly/

You can then compute the offset to your exported function the same way Mike describes, but watch out to store the difference in a 64bit value, and not in a DWORD (which is 32bit).

来源：https://stackoverflow.com/questions/10057687/calling-function-in-injected-dll

标签

c++

dll-injection