问题
The Background
- A Cocoa Non Document Core Data project with two Managed Object Models.
- Model 1 stays the same. Model 2 has changed, so I want to migrate the store.
- I've created a new version by Design > Data Model > Add Model Version in Xcode.
- The difference between versions is a single relationship that's been changed from to a one to many.
- I've made my changes to the model, then saved.
- I've made a new Mapping Model that has the old model as a source and new model as a destination.
- I've ensured all Mapping Models and Data Models and are being compiled and all are copied to the Resource folder of my app bundle.
- I've switched on migrations by
passing in a dictionary with the
NSMigratePersistentStoresAutomaticallyOptionkey as[NSNumber numberWithBool:YES]when adding the Persistent Store. - Rather than merging
all models in the bundle, I've specified the two
models I want to use (model 1 and the
new version of model 2) and merged
them using
modelByMergingModels:
The Problem
No matter what I do to migrate, I get the error message:
"Persistent store migration failed, missing source managed object model."
What I've Tried
- I clean after every single build.
- I've tried various combinations of having only the model I'm migrating to in Resources, being compiled, or both.
- Since the error message implies it can't find the source model for my migration, I've tried having every version of the model in both the Resources folder and being compiled.
- I've made sure I'm not making a really basic error by switching back to the original version of my data model. The app runs fine.
- I've deleted the Mapping Model and the new version of the model, cleaned, then recreated both.
- I've tried making a different change in the new model - deleting an entity instead.
I'm at my wits end.
I can't help but think I've made a huge mistake somewhere that I'm not seeing. Any ideas?
回答1:
Two possibilities:
- Your source model in your app does not match the actual store on disk.
- Your mapping model does not match your source model.
Turn on Core Data debugging and you should be able to see the hashes that Core Data is looking for when it is doing the migration. Compare these hashes to what is in your store on disk and see if they match up. Likewise the debugging should let you see the hashes in the mapping model to help you match everything up.
If it is just your mapping model that is misaligned, you can tell it to update from source from the design menu in Xcode. If you are missing the actual source model for your store file on disk then you can look in your version control system or try using an automatic migration to get that file to migrate to the model that you believe is the source.
Update 1
The location for changing the source and destination models has moved to the bottom of the editor window:
回答2:
Rather than merging all models in the bundle, I've specified the two models I want to use (model 1 and the new version of model 2) and merged them using modelByMergingModels:
This doesn't seem right. Why merge the models? You want to use model 2, migrating your store from model 1.
From the NSManagedObjectModel class reference
modelByMergingModels:Creates a single model from an array of existing models.
You don't need to do anything special/specific with your source model (model 1).. just so long as it's in your bundle, the automatic lightweight migration process will discover and use it.
I would suggest abandoning the mapping model you created in Xcode, as I've seen terrible performance in comparison with the automatic-lightweight migrations. Your mileage may vary, my changes between models are different to yours, but i wouldn't be surprised. Try some timing with and without your own mapping model in the bundle.
/* Inferred mapping */
NSError *error;
NSDictionary *options = [NSDictionary dictionaryWithObjectsAndKeys:
[NSNumber numberWithBool:YES], NSMigratePersistentStoresAutomaticallyOption,
[NSNumber numberWithBool:YES], NSInferMappingModelAutomaticallyOption,nil];
NSPersistentStore *migratedStore = [persistentStoreCoordinator addPersistentStoreWithType:nil
configuration:nil
URL:self.storeURL
options:options
error:&error];
migrationWasSuccessful = (migratedStore != nil);
You can verify in your code that your source model is available, by attempting to load it and verify that it is not nil:
NSString *modelDirectoryPath = [[NSBundle mainBundle] pathForResource:@"YourModelName" ofType:@"momd"];
if (modelDirectoryPath == nil) return nil;
NSString *modelPath = [modelDirectoryPath stringByAppendingPathComponent:@"YourModelName"];
NSURL *modelFileURL = [NSURL fileURLWithPath:modelPath];
NSManagedObjectModel *modelOne = [[NSManagedObjectModel alloc] initWithContentsOfURL:modelFileURL];
if (modelOne == nil) {
NSLog(@"Woops, Xcode lost my source model");
}
else {
[modelOne release];
}
This assumes in your project you have a resource "YourModelName.xcdatamodeld" and "YourModelName.xcdatamodel" within it.
Also, you can check if that model is compatible with your existing, pre-migration persistent store:
NSError *error;
NSDictionary *storeMeta = [NSPersistentStoreCoordinator metadataForPersistentStoreOfType:nil URL:self.storeURL error:&error];
if (storeMeta == nil) {
// Unable to read store meta
return NO;
}
BOOL isCompatible = [modelOne isConfiguration:nil compatibleWithStoreMetadata:storeMeta];
That code assumes you have a method -storeURL to specify where the persistent store is loaded from.
回答3:
While attempting to upgrade an existing app's Core Data model (and migrate legacy data), I just ran across a scenario where a third-party Framework was writing data into an app's database. I was getting this error, "Can't find model for source store." Because the third party model was not loaded when I was attempting the migration, the migration was failing.
I wrote this method (below) during troubleshooting this issue. It may be useful to those who are facing these types of issues.
- (BOOL) checkModelCompatibilityOfStoreWithURL: (NSURL *) myStoreURL
forModelNamed: (NSString *) myModelName
withBasePath: (NSString *) myBasePath;
{
NSError * error = nil;
NSDictionary *storeMeta = [NSPersistentStoreCoordinator metadataForPersistentStoreOfType:nil URL:myStoreURL error:&error];
if (!storeMeta) {
NSLog(@"Unable to load store metadata from URL: %@; Error = %@", myStoreURL, error);
return NO;
}
NSString * modelPath = [myBasePath stringByAppendingPathComponent: myModelName];
NSFileManager *fileManager = [NSFileManager defaultManager];
if (![fileManager fileExistsAtPath: modelPath]) {
// uh oh
NSLog(@"Can't find model.");
return NO;
}
NSURL * modelURL = [NSURL fileURLWithPath: modelPath];
NSManagedObjectModel * model = [[[NSManagedObjectModel alloc] initWithContentsOfURL: modelURL] autorelease];
BOOL result = [model isConfiguration: nil compatibleWithStoreMetadata: storeMeta];
NSLog(@"Tested model, %@, is%@ compatible with Database", modelPath, result ? @"" : @" ~not~");
return result;
}
This code snippet will obtain a store's metadata.
NSError *error = nil;
NSURL *storeUrl = [NSURL fileURLWithPath:storePath];
NSDictionary *storeMeta = [NSPersistentStoreCoordinator metadataForPersistentStoreOfType:nil URL:storeUrl error:&error];
NSLog(@"%@", [storeMeta objectForKey: @"NSStoreModelVersionHashes"]);
The VersionInfo.plist (stored in the compiled app's bundle) contains the hashes that are associated with the various entities in your models (base64 encoding). Similarly, a BLOB column in the datastore (Z_METADATA.Z_PLIST) contains a binary-encoded property list that has the hashes (also base64 encoded) for each entity that is associated with the data.
The -entitiesByName method on NSManagedObjectModel is useful for dumping the entities and hashes that exist within a specific model.
回答4:
I had a similar problem. I have used +modelByMergeingModels:, but I did not use Mapping Model. However merging models does not work with lightweight data migration.
From the Apple Docs:
To perform automatic lightweight migration, Core Data needs to be able to find the source and destination managed object models itself at runtime.
If you use +modelByMergeingModels: than that is used for the destination model. However Core Data will not be able to find source model. Source model has been created using +modelByMergeingModels: in older version of the application and Core Data does try to merge models to find out the source model.
What I ended up doing is that I have (manually) created a new merged .xcdatamodeld by editing the XML files of the models, added it into the project, removed the separate .xcdatamodelds from Compile Sources and instead of using +modelByMergeingModels: use NSManagedObjectModel's -initWithContentsOfURL: with the URL of the new merged model. I'll probably create a script that will automatically merge the models in the future.
回答5:
When I got this error, I had updated my core data models but not cleared the app instance from my test phone. This meant the models saved to core data on the phone did not match what I was trying to use in the code.
I removed the app from the phone and re-built/ran successfully.
来源：https://stackoverflow.com/questions/2492103/core-data-migration-problem-persistent-store-migration-failed-missing-source