问题
I have an existing bank application classes as shown below. The banks account can be of SavingsBankAccount or FixedBankAccount. There is an operation called IssueLumpSumInterest. For FixedBankAccount, the balance need to be updated only if the owner of the account has no other account.
This demands the FixedBankAccount object to know about other accounts of the account owner. How to do this by following SOLID/DDD/GRASP/Information Expert pattern?
namespace ApplicationServiceForBank
{
public class BankAccountService
{
RepositoryLayer.IRepository<RepositoryLayer.BankAccount> accountRepository;
ApplicationServiceForBank.IBankAccountFactory bankFactory;
public BankAccountService(RepositoryLayer.IRepository<RepositoryLayer.BankAccount> repo, IBankAccountFactory bankFact)
{
accountRepository = repo;
bankFactory = bankFact;
}
public void IssueLumpSumInterest(int acccountID)
{
RepositoryLayer.BankAccount oneOfRepositroyAccounts = accountRepository.FindByID(p => p.BankAccountID == acccountID);
int ownerID = (int) oneOfRepositroyAccounts.AccountOwnerID;
IEnumerable<RepositoryLayer.BankAccount> accountsForUser = accountRepository.FindAll(p => p.BankUser.UserID == ownerID);
DomainObjectsForBank.IBankAccount domainBankAccountObj = bankFactory.CreateAccount(oneOfRepositroyAccounts);
if (domainBankAccountObj != null)
{
domainBankAccountObj.BankAccountID = oneOfRepositroyAccounts.BankAccountID;
domainBankAccountObj.AddInterest();
this.accountRepository.UpdateChangesByAttach(oneOfRepositroyAccounts);
//oneOfRepositroyAccounts.Balance = domainBankAccountObj.Balance;
this.accountRepository.SubmitChanges();
}
}
}
public interface IBankAccountFactory
{
DomainObjectsForBank.IBankAccount CreateAccount(RepositoryLayer.BankAccount repositroyAccount);
}
public class MySimpleBankAccountFactory : IBankAccountFactory
{
public DomainObjectsForBank.IBankAccount CreateAccount(RepositoryLayer.BankAccount repositroyAccount)
{
DomainObjectsForBank.IBankAccount acc = null;
if (String.Equals(repositroyAccount.AccountType, "Fixed"))
{
acc = new DomainObjectsForBank.FixedBankAccount();
}
if (String.Equals(repositroyAccount.AccountType, "Savings"))
{
//acc = new DomainObjectsForBank.SavingsBankAccount();
}
return acc;
}
}
}
namespace DomainObjectsForBank
{
public interface IBankAccount
{
int BankAccountID { get; set; }
double Balance { get; set; }
string AccountStatus { get; set; }
void FreezeAccount();
void AddInterest();
}
public class FixedBankAccount : IBankAccount
{
public int BankAccountID { get; set; }
public string AccountStatus { get; set; }
public double Balance { get; set; }
public void FreezeAccount()
{
AccountStatus = "Frozen";
}
public void AddInterest()
{
//TO DO: Balance need to be updated only if the person has no other accounts.
Balance = Balance + (Balance * 0.1);
}
}
}
READING
Issue in using Composition for “is – a “ relationship
Implementing Business Logic (LINQ to SQL) http://msdn.microsoft.com/en-us/library/bb882671.aspx
Architecting LINQ to SQL applications
Exploring N-Tier Architecture with LINQ to SQL http://randolphcabral.wordpress.com/2008/05/08/exploring-n-tier-architecture-with-linq-to-sql-part-3-of-n/
Confusion between DTOs (linq2sql) and Class objects!
Domain Driven Design (Linq to SQL) - How do you delete parts of an aggregate?
回答1:
The first thing I noticed was the improper use of the bank account factory. The factory, pretty much as you have it, should be used by the repository to create the instance based on the data retrieved from the data store. As such, your call to accountRepository.FindByID will return either a FixedBankAccount or SavingsBankAccount object depending on the AccountType returned from the data store.
If the interest only applies to FixedBankAccount instances, then you can perform a type check to ensure you are working with the correct account type.
public void IssueLumpSumInterest(int accountId)
{
var account = _accountRepository.FindById(accountId) as FixedBankAccount;
if (account == null)
{
throw new InvalidOperationException("Cannot add interest to Savings account.");
}
var ownerId = account.OwnerId;
if (_accountRepository.Any(a => (a.BankUser.UserId == ownerId) && (a.AccountId != accountId)))
{
throw new InvalidOperationException("Cannot add interest when user own multiple accounts.");
}
account.AddInterest();
// Persist the changes
}
NOTE: FindById should only accept the ID parameter and not a lambda/Func. You've indicated by the name "FindById" how the search will be performed. The fact that the 'accountId' value is compared to the BankAccountId property is an implementation detail hidden within the method. Name the method "FindBy" if you want a generic approach that uses a lambda.
I would also NOT put AddInterest on the IBankAccount interface if all implementations do not support that behavior. Consider a separate IInterestEarningBankAccount interface that exposes the AddInterest method. I would also consider using that interface instead of FixedBankAccount in the above code to make the code easier to maintain and extend should you add another account type in the future that supports this behavior.
回答2:
From reading your requirement, here is how I would do it:
//Application Service - consumed by UI
public class AccountService : IAccountService
{
private readonly IAccountRepository _accountRepository;
private readonly ICustomerRepository _customerRepository;
public ApplicationService(IAccountRepository accountRepository, ICustomerRepository customerRepository)
{
_accountRepository = accountRepository;
_customerRepository = customerRepository;
}
public void IssueLumpSumInterestToAccount(Guid accountId)
{
using (IUnitOfWork unitOfWork = UnitOfWorkFactory.Create())
{
Account account = _accountRepository.GetById(accountId);
Customer customer = _customerRepository.GetById(account.CustomerId);
account.IssueLumpSumOfInterest(customer);
_accountRepository.Save(account);
}
}
}
public class Customer
{
private List<Guid> _accountIds;
public IEnumerable<Guid> AccountIds
{
get { return _accountIds.AsReadOnly();}
}
}
public abstract class Account
{
public abstract void IssueLumpSumOfInterest(Customer customer);
}
public class FixedAccount : Account
{
public override void IssueLumpSumOfInterest(Customer customer)
{
if (customer.AccountIds.Any(id => id != this._accountId))
throw new Exception("Lump Sum cannot be issued to fixed accounts where the customer has other accounts");
//Code to issue interest here
}
}
public class SavingsAccount : Account
{
public override void IssueLumpSumOfInterest(Customer customer)
{
//Code to issue interest here
}
}
- The IssueLumpSumOfInterest method on the Account aggregate requires the Customer aggregate to help decide whether interest should be issued.
- The customer aggregate contains a list of account IDs - NOT a list of account aggregates.
- The base class 'Account' has a polymorphic method - the FixedAccount checks that the customer doesn't have any other accounts - the SavingsAccount doesn't do this check.
回答3:
2 min scan answer..
- Not sure why there is a need for 2 representations of a BankAccount RepositoryLayer.BankAccount and DomainObjectsForBank.IBankAccount. Hide the persistence layer coupled one.. deal with just the domain object in the service.
- Do not pass/return Nulls - I think is good advice.
- The finder methods look like the LINQ methods which select items from a list of collection. Your methods look like they want to get the first match and exit..in which case your parameters can be simple primitives (Ids) vs lambdas.
The general idea seems right. The service encapsulates the logic for this transaction - not the domain objects. If this changes, only one place to update.
public void IssueLumpSumInterest(int acccountID)
{
var customerId = accountRepository.GetAccount(accountId).CustomerId;
var accounts = accountRepository.GetAccountsForCustomer(customerId);
if ((accounts.First() is FixedAccount) && accounts.Count() == 1)
{
// update interest
}
}
回答4:
Things that strike me as weird:
- Your
IBankAccounthas a methodFreezeAccount, but I presume that all accounts would have quite similar behavior? Perhaps aBankAccountclass is warranted that implements some of the interface? AccountStatusshould probably be an enum? What should happen if an account is "Forzen"?
来源：https://stackoverflow.com/questions/11241541/ddd-approach-to-access-external-information