Change R default library path using .libPaths in Rprofile.site fails to work

问题

I am running R on Windows, not as an administrator. When I install a package, the following command doesn\'t work:

> install.packages(\"zoo\")
Installing package(s) into ‘C:/Program Files/R/R-2.15.2/library’
(as ‘lib’ is unspecified)
Warning in install.packages :
  \'lib = \"C:/Program Files/R/R-2.15.2/library\"\' is not writable

To install a package, I have to specify a library location:

install.packages(\"zoo\", lib=\"C:/software/Rpackages\")

To load a package, I also have to specify the library location:

library(\"zoo\", lib.loc=\"C:/software/Rpackages\")

All of this is OK, but I wanted to see if I could add C:/software/Rpackages to the library path somehow and thus not have to type it each time.

As I searched online, I found that one way to do this is to edit the Rprofile.site file and to add the line

.libPaths(\"C:/software/Rpackages\")

However, after doing this, and starting RStudio, this is the output that I get

> .libPaths()
[1] \"C:/Program Files/R/R-2.15.2/library\" \"C:/Program Files/RStudio/R/library\"

The .libPaths command that I added to the Rprofile.site doesn\'t seem to have had any effect! Why is this the case? Or more importantly, how can I fix the problem so that I can install and load packages without typing in the library location?

Note: if I start RStudio the .libPaths() command seems to work as it is supposed to

.libPaths(\"C:/software/Rpackages\")
> .libPaths()
[1] \"C:/software/Rpackages\"               \"C:/Program Files/R/R-2.15.2/library\"

Isn\'t that strange?

回答1:

I generally try to keep all of my packages in one library, but if you want to add a library why not append the new library (which must already exist in your filesystem) to the existing library path?

.libPaths( c( .libPaths(), "~/userLibrary") )

Or (and this will make the userLibrary the first place to put new packages):

.libPaths( c( "~/userLibrary" , .libPaths() ) )

Then I get (at least back when I wrote this originally):

> .libPaths()
[1] "/Library/Frameworks/R.framework/Versions/2.15/Resources/library"
[2] "/Users/user_name/userLibrary"

The .libPaths function is a bit different than most other nongraphics functions. It works via side-effect. The functions Sys.getenv and Sys.setenv that report and alter the R environment variables have been split apart but .libPaths can either report or alter its target.

The information about the R startup process can be read at ?Startup help page and there is RStudio material at: https://support.rstudio.com/hc/en-us/articles/200549016-Customizing-RStudio

In your case it appears that RStudio is not respecting the Rprofile.site settings or perhaps is overriding them by reading an .Rprofile setting from one of the RStudio defaults. It should also be mentioned that the result from this operation also appends the contents of calls to .Library and .Library.site, which is further reason why an RStudio- (or any other IDE or network installed-) hosted R might exhibit different behavior.

Since Sys.getenv() returns the current system environment for the R process, you can see the library and other paths with:

Sys.getenv()[ grep("LIB|PATH", names(Sys.getenv())) ]

The two that matter for storing and accessing packages are (now different on a Linux box):

R_LIBS_SITE                          /usr/local/lib/R/site-library:/usr/lib/R/site-library:/usr/lib/R/library
R_LIBS_USER                          /home/david/R/x86_64-pc-linux-gnu-library/3.5.1/

回答2:

The proper solution is to set environment variable R_LIBS_USER to the value of the file path to your desired library folder as opposed to getting RStudio to recognize a Rprofile.site file.

To set environment variable R_LIBS_USER in Windows, go to the Control Panel (System Properties -> Advanced system properties -> Environment Variables -> User Variables) to a desired value (the path to your library folder), e.g.

Variable name: R_LIBS_USER 
Variable value: C:/software/Rpackages

Setting R_LIBS_USER will ensure that the library shows up first in .libPaths() regardless of starting RStudio directly or by right-clicking an file and "Open With" to start RStudio.

The Rprofile solution can work if RStudio is always started by clicking the RStudio shortcut. In this case, setting the default working directory to the directory that houses your Rprofile will be sufficient. The Rprofile solution does not work when clicking on a file to start RStudio because that changes the working directory away from the default working directory.

回答3:

I managed to solve the problem by placing the code in the .Rprofile file in the default working directory.

First, I found the location of the default working directory

> getwd()
[1] "C:/Users/me/Documents"

Then I used a text editor to write a simple .Rprofile file with the following line in it

.libPaths("C:/software/Rpackages")

Finally, when I start R and run .libPaths() I get the desired output:

> .libPaths()
[1] "C:/software/Rpackages"               "C:/Program Files/R/R-2.15.2/library"
[3] "C:/Program Files/RStudio/R/library"

回答4:

https://superuser.com/questions/749283/change-rstudio-library-path-at-home-directory

Edit ~/.Renviron

R_LIBS_USER=/some/path

回答5:

I found what I think is a solution here (thank you Carl Schwarz at SFU) for adding a personal library that is permanently (you don't have to define it each session) recognized whether using R or Rstudio, and Rstudio treats it as the default on my Mac machine. I hadn't seen it laid out this explicitly on SO, so I summarized the steps they provided, for Windows and then for Mac.

For a Windows 7 OS:

Create a directory on the drive where you want to have your personal library, e.g. C:\User\Rlibs (or another that you have permissions to)
Search for/go to "Edit environment variable for your account" in the Windows search bar to edit control panel settings
Click "New..." in the middle of the "Environmental Variables" window
In the "New User Variable" window, type R_LIBS for the "Variable name", and the path to the personal library directory you created, e.g. C:\User\Rlibs
Click OK and you should see the Variable/Value pair in the User variables window
Click OK again

Now when you start R (or Rstudio) and type the command .libPaths() you should see the personal library you created as well as the R system library.

For Mac:

In your "Home" or "username" directory create a folder called Rlibs
Launch the Terminal application
Type: echo "R_LIBS=~/Rlibs"> .Renvrion Make sure case matches.
Type ls -a to see the full list of files in the directory, which should now include .Renvrion
Verify that the .Renviron file has been set properly: more .Renviron

Launch R/Rstudio and type .libPaths() and you should see the new path to your personal library.

回答6:

If you do not have admin-rights, it can also be helpful to open the Rprofile.site-file located in \R-3.1.0\etc and add:

.First <- function(){
  .libPaths("your path here")
}

This evaluates the .libPath() command directly at start

回答7:

I've had real trouble understanding this. gorkypl gave the correct solution above when I last re-installed my OS & Rstudio but this time round, setting my environment variable didn't resolve.

Uninstallled both R and Rstudio, creating directories C:\R and C:\Rstudio then reinstalled both.

Define R_LIBS_USER user variable to your prefered directory (as per gorkypl's answer) and restart your machine for User variable to be loaded. Open Rstudio, errors should be gone.

You can also use Sys.setenv() to modify R_LIBS_USER to the path of your alternative library which is easier and does not need to restart your computer.

To see what R_LIBS_USER is set to: ?Sys.getenv()

Reading help(Startup) is useful.

回答8:

If your default package library has been changed after installing a new version of R or by any other means, you can append both the libraries to use all the packages with the help of the commands below. Get the existing library path :

.libPaths()

Now,set the existing and the old path :

.libPaths(c(.libPaths(), "~/yourOldPath"))

Hope it helps.

回答9:

just change the default folder for your R libraries in a directory with no Administrator rights, e.g.

.libPaths("C:/R/libs")

回答10:

I read the readme. In that they mentioned use .libPaths() in command line to check which paths are there. I had 2 library paths earlier. When I used the command .libpath("C:/Program Files/R/R-3.2.4revised/library") where I wanted, it changed the library path. When I typed in .libPaths() at the command line again it showed me the correct path. Hope this helps

回答11:

getwd()
# [1] "C:/Users/..../software/My R studio"

copy the above link with double inverted comma

.libPaths(new="C:/Users/..../software/My R studio")

Your default path will change for installing pakages

回答12:

If you want to change your library path permanently (without calling .libPath() every time when entering in R, this works for me:

create .Rprofile under your home directory. (~/.Rprofile)
type .libPaths(c( .libPaths(), "your new path" )) in .Rprofile file, save.
open R (any directory) and check, just type .libPaths(), you can find your libaray path is updated!

回答13:

I was looking into this because R was having issues installing into the default location and was instead just putting the packages into the temp folder. It turned out to be the latest update for Mcaffee Endpoint Security which apparently has issues with R. You can disable the threat protection while you install the packages and it will work properly.

来源：https://stackoverflow.com/questions/15170399/change-r-default-library-path-using-libpaths-in-rprofile-site-fails-to-work

标签

rstudio

r-faq

library-path