Is it possible to remove a break point set with ipdb.set_trace()?

问题

I used ipdb.set_trace() somewhere in my Python code. Is it possible to ignore this break point using a IPDB command?

clear tells me that it cleared all break points, but IPDB stops again when it stumbles upon the line with ipdb.set_trace().

disable 1 tells me: No breakpoint numbered 1 ignore 1 says: Breakpoint index '1' is not valid

To clarify: Of course I could simply remove the break point from my source code. But this would require to quit the debugger and to start it again. Often it needs a lot of work to get somewhere and restarting the debugger makes life more difficult. Also if there is a huge loop and you want inspect objects in the loop, the easiest is to place a break point in the loop directly after the object. How could I then skip the loop (and all thousands of calls set_trace()) and step through the code after the loop using next?

回答1:

Well, you CAN take advantage of the fact that anything in Python is an object. While in the debugger, you can do something like this:

def f(): pass
ipdb.set_trace = f

set_trace will still be called, but it won't do anything. Of course, it's somewhat permanent, but you can just do

reload ipdb

and you'll get the original behaviour back.

(why would you do this? when you accidentally put a breakpoint in an often-called function that is usually called under a try/except. Once you realize you're stopping 1000 times in this function, you try to ctrl-c, but that gets caught by the try/except and you're back in ipdb again. So, if you're in low-level code, make sure your set_traces have some context:

if myvar in ['some', 'sentinel', 'values']:
    ipdb.set_trace()

etc.

回答2:

After learning from Corley

ipdb.set_trace = lambda: None

Works for me.

回答3:

Based on Corley and GLaDOS answers, you can use this trick to set_trace for several loops without overwriting the ipdb.set_trace()

import ipdb
dbg1 = ipdb.set_trace  # BREAKPOINT
for i in range(10):
    my_var2 = 10 / 3
    dbg1()  # BREAKPOINT
    dbg1 = lambda: None
    print(my_var2)


dbg2 = ipdb.set_trace  # BREAKPOINT
for i in range(10):
    my_var2 = 20 / 3
    dbg2()  # BREAKPOINT
    dbg2 = lambda: None
    print(my_var2)

Works for me like a charm.

回答4:

Running the program should also tell you exactly where you've set your idb.set_trace() when it's being hit (otherwise, try the where or bt commands). You can then remove that line from the file, and restart the program.

Otherwise, you might find this useful, if you feel more experimental.

来源：https://stackoverflow.com/questions/19098850/is-it-possible-to-remove-a-break-point-set-with-ipdb-set-trace

标签

python

debugging

ipdb