Linux: Which process is causing "device busy" when doing umount?
Look at the lsof command (list open files) -- it can tell you which processes are holding what open. Sometimes it's tricky but often something as simple as sudo lsof | grep (your device name here) could do it for you.
Just in case... sometimes happens that you are calling umount from the terminal, and your current directory belongs to the mounted filesystem.
You should use the fuser command.
Eg. fuser /dev/cdrom will return the pid(s) of the process using /dev/cdrom.
If you are trying to unmount, you can kill theses process using the -k switch (see man fuser).
Check for open loop devices mapped to a file on the filesystem with "losetup -a". They wont show up with either lsof or fuser.
Also check /etc/exports. If you are exporting paths within the mountpoint via NFS, it will give this error when trying to unmount and nothing will show up in fuser or lsof.
lsof +f -- /mountpoint
(as lists the processes using files on the mount mounted at /mountpoint. Particularly useful for finding which process(es) are using a mounted USB stick or CD/DVD.
lsof and fuser are indeed two ways to find the process that keeps a certain file open. If you just want umount to succeed, you should investigate its -f and -l options.
That's exactly why the "fuser -m /mount/point" exists.
BTW, I don't think "fuser" or "lsof" will indicate when a resource is held by kernel module, although I don't usually have that issue..
lsof and fuser didn't give me anything either.
After a process of renaming all possible directories to .old and rebooting the system every time after I made changes I found one particular directory (relating to postfix) that was responsible.
It turned out that I had once made a symlink from /var/spool/postfix to /disk2/pers/mail/postfix/varspool in order to minimise disk writes on an SDCARD-based root filesystem (Sheeva Plug).
With this symlink, even after stopping the postfix and dovecot services (both ps aux as well as netstat -tuanp didn't show anything related) I was not able to unmount /disk2/pers.
When I removed the symlink and updated the postfix and dovecot config files to point directly to the new dirs on /disk2/pers/ I was able to successfully stop the services and unmount the directory.
Next time I will look more closely at the output of:
ls -lR /var | grep ^l | grep disk2
The above command will recursively list all symbolic links in a directory tree (here starting at /var) and filter out those names that point to a specific target mount point (here disk2).
Open files
Processes with open files are the usual culprits. Display them:
lsof +f -- <mountpoint or device>
There is an advantage to using /dev/<device> rather than /mountpoint: a mountpoint will disappear after an umount -l, or it may be hidden by an overlaid mount.
fuser can also be used, but to my mind lsof has a more useful output. However fuser is useful when it comes to killing the processes causing your dramas so you can get on with your life.
List files on <mountpoint> (see caveat above):
fuser -vmM <mountpoint>
Interactively kill only processes with files open for writing:
fuser -vmMkiw <mountpoint>
After remounting read-only (mount -o remount,ro <mountpoint>), it is safe(r) to kill all remaining processes:
fuser -vmMk <mountpoint>
Mountpoints
The culprit can be the kernel itself. Another filesystem mounted on the filesystem you are trying to umount will cause grief. Check with:
mount | grep <mountpoint>/
For loopback mounts, also check the output of:
losetup -la
Anonymous inodes (Linux)
Anonymous inodes can be created by:
- Temporary files (
openwithO_TMPFILE) - inotify watches
- [eventfd]
- [eventpoll]
- [timerfd]
These are the most elusive type of pokemon, and appear in lsof's TYPE column as a_inode (which is undocumented in the lsof man page).
They won't appear in lsof +f -- /dev/<device>, so you'll need to:
lsof | grep a_inode
For killing processes holding anonymous inodes, see: List current inotify watches (pathname, PID).
If you still can not unmount or remount your device after stopping all services and processes with open files, then there may be a swap file or swap partition keeping your device busy. This will not show up with fuser or lsof. Turn off swapping with:
sudo swapoff -a
You could check beforehand and show a summary of any swap partitions or swap files with:
swapon -s
or:
cat /proc/swaps
As an alternative to using the command sudo swapoff -a, you might also be able to disable the swap by stopping a service or systemd unit. For example:
sudo systemctl stop dphys-swapfile
or:
sudo systemctl stop var-swap.swap
In my case, turning off swap was necessary, in addition to stopping any services and processes with files open for writing, so that I could remount my root partition as read only in order to run fsck on my root partition without rebooting. This was necessary on a Raspberry Pi running Raspbian Jessie.
Filesystems mounted on the filesystem you're trying to unmount can cause the target is busy error in addition to any files that are in use. (For example when you mount -o bind /dev /mnt/yourmount/dev in order to use chroot there.)
To find which file systems are mounted on the filesystem run the following:
mount | grep '/mnt/yourmount'
To find which files are in use the advice already suggested by others here:
lsof | grep '/mnt/yourmount'
来源：https://stackoverflow.com/questions/624154/linux-which-process-is-causing-device-busy-when-doing-umount