I'm trying to calculate a Bezier-like spline curve that passes through a sequence of x-y coordinates. An example would be like the following output from the cscvn function in Matlab (example link):
I believe the (no longer maintained) grid package used to do this (grid.xspline function?), but I haven't been able to install an archived version of the package, and don't find any examples exactly along the lines of what I would like.
The bezier package also looks promising, but it is very slow and I also can't get it quite right:
library(bezier)
set.seed(1)
n <- 10
x <- runif(n)
y <- runif(n)
p <- cbind(x,y)
xlim <- c(min(x) - 0.1*diff(range(x)), c(max(x) + 0.1*diff(range(x))))
ylim <- c(min(y) - 0.1*diff(range(y)), c(max(y) + 0.1*diff(range(y))))
plot(p, xlim=xlim, ylim=ylim)
text(p, labels=seq(n), pos=3)
bp <- pointsOnBezier(cbind(x,y), n=100)
lines(bp$points)
arrows(bp$points[nrow(bp$points)-1,1], bp$points[nrow(bp$points)-1,2],
bp$points[nrow(bp$points),1], bp$points[nrow(bp$points),2]
)
As you can see, it doesn't pass through any points except the end values.
I would greatly appreciate some guidance here!
It may not the be the best approach, bit grid certainly isn't inactive. It's included as a default package with the R installation. It's the underlying graphics engine for plotting libraries like lattice and ggplot. You shouldn't need to install it, you should just be able to load it. Here's how I might translate your code to use grid.xpline
set.seed(1)
n <- 10
x <- runif(n)
y <- runif(n)
xlim <- c(min(x) - 0.1*diff(range(x)), c(max(x) + 0.1*diff(range(x))))
ylim <- c(min(y) - 0.1*diff(range(y)), c(max(y) + 0.1*diff(range(y))))
library(grid)
grid.newpage()
pushViewport(viewport(xscale=xlim, yscale=ylim))
grid.points(x, y, pch=16, size=unit(2, "mm"),
default.units="native")
grid.text(seq(n), x,y, just=c("center","bottom"),
default.units="native")
grid.xspline(x, y, shape=c(0,rep(-1, 10-2),0), open=TRUE,
default.units="native")
popViewport()
which results in
note that grid is pretty low-level so it's not super easy to work with, but it does allow you far more control of what and where you plot.
And if you want to extract the points along the curve rather than draw it, look at the ?xsplinePoints help page.
There is no need to use grid really. You can access xspline from the graphics package.
Following from your code and the shape from @mrflick:
set.seed(1)
n <- 10
x <- runif(n)
y <- runif(n)
p <- cbind(x,y)
xlim <- c(min(x) - 0.1*diff(range(x)), c(max(x) + 0.1*diff(range(x))))
ylim <- c(min(y) - 0.1*diff(range(y)), c(max(y) + 0.1*diff(range(y))))
plot(p, xlim=xlim, ylim=ylim)
text(p, labels=seq(n), pos=3)
You just need one extra line:
xspline(x, y, shape = c(0,rep(-1, 10-2),0), border="red")
Thanks to all that helped with this. I'm summarizing the lessons learned plus a few other aspects.
Catmull-Rom spline vs. cubic B-spline
Negative shape values in the xspline function return a Catmull-Rom type spline, with spline passing through the x-y points. Positive values return a cubic B type spline. Zero values return a sharp corner. If a single shape value is given, this is used for all points. The shape of end points is always treated like a sharp corner (shape=0), and other values do not influence the resulting spline at the end points:
# Catmull-Rom spline vs. cubic B-spline
plot(p, xlim=extendrange(x, f=0.2), ylim=extendrange(y, f=0.2))
text(p, labels=seq(n), pos=3)
# Catmull-Rom spline (-1)
xspline(p, shape = -1, border="red", lwd=2)
# Catmull-Rom spline (-0.5)
xspline(p, shape = -0.5, border="orange", lwd=2)
# cubic B-spline (0.5)
xspline(p, shape = 0.5, border="green", lwd=2)
# cubic B-spline (1)
xspline(p, shape = 1, border="blue", lwd=2)
legend("bottomright", ncol=2, legend=c(-1,-0.5), title="Catmull-Rom spline", col=c("red", "orange"), lty=1)
legend("topleft", ncol=2, legend=c(1, 0.5), title="cubic B-spline", col=c("blue", "green"), lty=1)
Extracting results from xspline for external plotting
This took some searching, but the trick is to apply the argument draw=FALSE to xspline.
# Extract xy values
plot(p, xlim=extendrange(x, f=0.1), ylim=extendrange(y, f=0.1))
text(p, labels=seq(n), pos=3)
spl <- xspline(x, y, shape = -0.5, draw=FALSE)
lines(spl)
arrows(x0=(spl$x[length(spl$x)-0.01*length(spl$x)]), y0=(spl$y[length(spl$y)-0.01*length(spl$y)]),
x1=(spl$x[length(spl$x)]), y1=(spl$y[length(spl$y)])
)
来源：https://stackoverflow.com/questions/28093925/calculate-a-2d-spline-curve-in-r