问题
In different encodings of Unicode, for example UTF-16le or UTF-8, a character may occupy 2 or 3 bytes. Many Unicode applications doesn't take care of display width of Unicode chars just like they are all Latin letters. For example, in 80-column text, which should contains 40 Chinese characters or 80 Latin letters in one line, but most application (like Eclipse, Notepad++, and all well-known text editors, I dare if there's any good exception) just count each Chinese character as 1 width as Latin letter. This certainly make the result format ugly and non-aligned.
For example, a tab-width of 8 will get the following ugly result (count all Unicode as 1 display width):
apple 10
banana 7
苹果 6
猕猴桃 31
pear 16
However, the expected format is (Count each Chinese character as 2 width):
apple 10
banana 7
苹果 6
猕猴桃 31
pear 16
The improper calculation on display width of chars make these editors totally useless when doing tab-align, and line wrapping and paragraph reformat.
Though, the width of a character may vary between different fonts, but in all cases of Fixed-size terminal font, Chinese character is always double width. That is to say, in despite of font, each Chinese character is preferred to display in 2 width.
One of solution is, I can get the correct width by convert the encoding to GB2312, in GB2312 encoding each Chinese character takes 2 bytes. however, some Unicode characters doesn't exist in GB2312 charset (or GBK charset). And, in general it's not a good idea to compute the display width from the encoded size in bytes.
To simply calculate all character in Unicode in range of (\u0080..\uFFFF) as 2 width is also not correct, because there're also many 1-width chars scattered in the range.
There's also difficult when calculate the display width of Arabic letters and Korean letters, because they construct a word/character by arbitrary number of Unicode code points.
So, the display width of a Unicode code point maybe not an integer, I deem that is ok, they can be grounded to integer in practice, at least better than none.
So, is there any attribute related to the preferred display width of a char in Unicode standard? Or any Java library function to calculate the display width?
回答1:
Sounds like you're looking for something like wcwidth and wcswidth, defined in IEEE Std 1003.1-2001, but removed from ISO C:
The
wcwidth()function shall determine the number of column positions required for the wide character wc. Thewcwidth()function shall either return 0 (if wc is a null wide-character code), or return the number of column positions to be occupied by the wide-character code wc, or return -1 (if wc does not correspond to a printable wide-character code).
Markus Kuhn wrote an open source version, wcwidth.c, based on Unicode 5.0. It includes a description of the problem, and an acknowledgement of the lack of standards in the area:
In fixed-width output devices, Latin characters all occupy a single "cell" position of equal width, whereas ideographic CJK characters occupy two such cells. Interoperability between terminal-line applications and (teletype-style) character terminals using the UTF-8 encoding requires agreement on which character should advance the cursor by how many cell positions. No established formal standards exist at present on which Unicode character shall occupy how many cell positions on character terminals. These routines are a first attempt of defining such behavior based on simple rules applied to data provided by the Unicode Consortium. [...]
It implements the following rules:
- The null character (U+0000) has a column width of 0.
- Other C0/C1 control characters and DEL will lead to a return value of -1.
- Non-spacing and enclosing combining characters (general category code Mn or Me in the Unicode database) have a column width of 0.
- SOFT HYPHEN (U+00AD) has a column width of 1.
- Other format characters (general category code Cf in the Unicode database) and ZERO WIDTH SPACE (U+200B) have a column width of 0.
- Hangul Jamo medial vowels and final consonants (U+1160-U+11FF) have a column width of 0.
- Spacing characters in the East Asian Wide (W) or East Asian Full-width (F) category as defined in Unicode Technical Report #11 have a column width of 2.
- All remaining characters (including all printable ISO 8859-1 and WGL4 characters, Unicode control characters, etc.) have a column width of 1.
回答2:
You are confusing code points, graphemes and encoding.
The encoding is how code points are converted into an octet stream for storage, transmission or processing. Both UTF-8 and UTF-16 are variable width encodings, with different code points needing a different number of octets (for UTF-8 anything from 1 to, IIRC, 6 and UTF-16 either 2 or 4).
Graphemes are "what we see as a character", these are what are displayed. One code point (e.g. LATIN LOWER CASE A) for one grapheme, but in other cases multiple code points might be needed (e.g. LATIN LOWER CASE A, COMBINING ACUTE and COMBINING UNDERSCORE to get an lower case with acute and underscore as used in Kwakwala). In some cases there is more than one combination of code points to create the same grapheme (e.g. LATIN LOWER CASE A WITH ACUTE and COMBINING UNDERSCORE), this is "normalisation",
I.e. the length of the encoding of a single grapheme will depend on the encoding and normalisation.
The display width of the grapheme will depend on the typeface, style and size independently of the encoding length.
For more information, see Wikipedia on Unicode and Unicode's home. There are also some excellent books, perhaps most notably "Fonts & Encodings" by Yannis Haralambous, O'Reilly.
回答3:
The Unicode property reflecting this concept is East_Asian_Width. It's not really reliable as a visual width in the context of general Unicode rendering, as non-Asian characters, combining characters etc. will fail to line up even in a monospaced font. (Your example certainly doesn't render lined-up for me.)
Java does not have the built-in ability to read this property for characters (though Android's extension does). You can get it from ICU4J if you really need it.
回答4:
I believe that to do this correctly, you need to consider that component of the published Unicode Standard known as Unicode Standard Annex #14, the Unicode Line Breaking Algorithm.
If you were programming in Perl, what you want to know would be super easy, because Perl’s Unicode::LineBreak module implementing UAX#14 includes a class with a simple columns method that tells you the right answer for its string argument. These things work especially well on Asian languages, where absolutley nothing else will do. This module includes over 6,000 unit tests, is actively maintained, and its author is himself Asian, so it’s important to him to get these tricky bits exactly correct.
Most of the guts of the module are a library written in C. I have not looked at how to call its component C library from other languages thn Perl, but you might look into whether this might be possible.
回答5:
Regarding "Or any Java library function to calculate the display width?": if there is one I've never found it.
The simplest method of calulating the width of a character / string is to write it in the GNU unicode font ( http://unifoundry.com/unifont.html ) & measure the character width. Not clean, but so far it's worked for every encoding I can think of.
FWIW here's what I do:
java.awt.font.Font MONOSPACEFONT = Font.createFont(Font.TRUETYPE_FONT,
new File("unifont-5.1.20080907.ttf"));
java.awt.font.FontRenderContext FRC = new FontRenderContext(null, true, true);
int charWidth = (int) (2.0*((java.awt.geom.Rectangle2D.Float)
MONOSPACEFONT.getStringBounds(stringToMeasure, FRC)).width);
... this should work pretty much anywhere you deploy your JVM (it runs fine in a headless environment).
来源：https://stackoverflow.com/questions/3634627/how-to-know-the-preferred-display-width-in-columns-of-unicode-characters