Speed-up data.table group by using multiple cores and parallel programming

问题

I have a large code and the aggregation step is the current bottleneck in terms of speed.

In my code I'd like to speed-up the data grouping step to be faster. A SNOTE (simple non trivial example) of my data looks like this:

library(data.table)
a = sample(1:10000000, 50000000, replace = TRUE)
b = sample(c("3m","2m2d2m","3m2d1i3s2d","5m","4m","9m","1m"), 50000000, replace = TRUE)
d = sample(c("3m","2m2d2m","3m2d1i3s2d","5m","4m","9m","1m"), 50000000, replace = TRUE)
e = a
dt = data.table(a = a, b = b, d = d, e = e)
system.time(c.dt <- dt[,list(b = paste(b, collapse=""), d = paste(d, collapse=""), e = e[1], by=a)])
   user  system elapsed 
 60.107   3.143  63.534

This is quite fast for such large data example but in my case I am still looking for further speed-up. In my case I have multiple cores so I am almost sure there must be a way to use such computational capability.

I am open to changing my data type to a data.frame, or idata.frame objects (in theory idata.frame are supposedly faster than data.frames).

I did some research and seems the plyr package has some parallel capabilities that could be helpful but I am still struggling on how to do it for the grouping I am trying to do. In another SO post they discuss some of these ideas. I am still unsure on how much more I'd achieve with this parallelization since it uses the foreach function. In my experience the foreach function is not a good idea for millions of fast operations because the communication effort between cores ends up slowing down the parallelization effort.

回答1:

If you have multiple cores available to you, why not leverage the fact that you can quickly filter & group rows in a data.table using its key:

library(doMC)
registerDoMC(cores=4)


setkey(dt, "a")

finalRowOrderMatters = FALSE # FALSE can be faster
foreach(x=unique(dt[["a"]]), .combine="rbind", .inorder=finalRowOrderMatters) %dopar% 
     dt[.(x) ,list(b = paste(b, collapse=""), d = paste(d, collapse=""), e = e[[1]])]

Note that if the number of unique groups (ie length(unique(a)) ) is relatively small, it will be faster to drop the .combine argument, get the results back in a list, then call rbindlist on the results. In my testing on two cores & 8GB RAM, the threshold was at about 9,000 unique values. Here is what I used to benchmark:

# (otion a)
round(rowMeans(replicate(3, system.time({
# ------- #
  foreach(x=unique(dt[["a"]]), .combine="rbind", .inorder=FALSE) %dopar% 
     dt[.(x) ,list(b = paste(b, collapse=""), d = paste(d, collapse=""), e = e[[1]])]
# ------- #
}))), 3) 
# [1]  1.243 elapsed for N ==  1,000
# [1] 11.540 elapsed for N == 10,000, length(unique(dt[["a"]])) == 8617
# [1] 57.404 elapsed for N == 50,000



# (otion b)
round(rowMeans(replicate(3, system.time({
# ------- #
    results <- 
      foreach(x=unique(dt[["a"]])) %dopar% 
         dt[.(x) ,list(b = paste(b, collapse=""), d = paste(d, collapse=""), e = e[[1]])]
    rbindlist(results)
# ------- #
}))), 3)
# [1]  1.117 elapsed for N ==  1,000
# [1] 10.567 elapsed for N == 10,000, length(unique(dt[["a"]])) == 8617
# [1] 76.613 elapsed for N == 50,000


## And used the following to create the dt
N <- 5e4
set.seed(1)
a = sample(1:N, N*2, replace = TRUE)
b = sample(c("3m","2m2d2m","3m2d1i3s2d","5m","4m","9m","1m"), N*2, replace = TRUE)
d = sample(c("3m","2m2d2m","3m2d1i3s2d","5m","4m","9m","1m"), N*2, replace = TRUE)
e = a
dt = data.table(a = a, b = b, d = d, e = e, key="a")

回答2:

Can you parallelize aggregation with data.table? Yes.

Is it worth it? NO. This is a key point that the previous answer failed to highlight.

As Matt Dowle explains in data.table and parallel computing, copies ("chunks") need to be made before being distributed when running operations in parallel. This slows things down. In some cases, when you cannot use data.table (e.g. running many linear regressions), it is worth splitting up tasks between cores. But not aggregation — at least when data.table is involved.

In short (and until proven otherwise), aggregate using data.table and stop worrying about potential speed increases using doMC. data.table is already blazing fast compared to anything else available when it comes to aggregation — even if it's not multicore!

Here are some benchmarks you can run for yourself comparing data.table internal aggregation using by with foreach and mclapply. The results are listed first.

#-----------------------------------------------

# TL;DR FINAL RESULTS (Best to Worst)
# 3 replications, N = 10000:
# (1)  0.007 -- data.table using `by`
# (2)  3.548 -- mclapply with rbindlist
# (3)  5.557 -- foreach with rbindlist
# (4)  5.959 -- foreach with .combine = "rbind"
# (5) 14.029 -- lapply

# ----------------------------------------------

library(data.table)

## And used the following to create the dt
N <- 1e4
set.seed(1)
a = sample(1:N, N*2, replace = TRUE)
b = sample(c("3m","2m2d2m","3m2d1i3s2d","5m","4m","9m","1m"), N*2, replace = TRUE)
d = sample(c("3m","2m2d2m","3m2d1i3s2d","5m","4m","9m","1m"), N*2, replace = TRUE)
e = a
dt = data.table(a = a, b = b, d = d, e = e, key="a")
setkey(dt, "a")

# TEST AGGREGATION WITHOUT PARALLELIZATION ---------------------------
## using data.tables `by` to aggregate
round(rowMeans(replicate(3, system.time({
    dt[,list(b = paste(b, collapse=""), d = paste(d, collapse=""), e = e[1], by=a)]
}))), 3)
# [1] 0.007 elapsed for N == 10,000, length(unique(dt[["a"]])) == 8617

## using `lapply`
round(rowMeans(replicate(3, system.time({
    results <- lapply(unique(dt[["a"]]), function(x) {
        dt[.(x), list(b = paste(b, collapse=""), d = paste(d, collapse=""), e = e[1])]
    })
    rbindlist(results)
}))), 3)
# [1] 14.029 elapsed for N == 10,000

# USING `mclapply` FORKING ---------------------------------
## use mclapply
round(rowMeans(replicate(3, system.time({
    results <- mclapply(unique(dt[["a"]]),
    function(x) {
        dt[.(x), list(b = paste(b, collapse=""), d = paste(d, collapse=""), e = e[[1]])]
    }, mc.cores=4)
    rbindlist(results)
}))), 3)
# [1] 3.548 elapsed for N == 10,000


# PARALLELIZATION USING `doMC` PACKAGE ---------------------------------
library(doMC)
mc = 4
registerDoMC(cores=mc)
getDoParWorkers()
# [1] 4

## (option a) by Ricardo Saporta
round(rowMeans(replicate(3, system.time({
    foreach(x=unique(dt[["a"]]), .combine="rbind", .inorder=FALSE) %dopar%
    dt[.(x) ,list(b = paste(b, collapse=""), d = paste(d, collapse=""), e = e[[1]])]
}))), 3)
# [1] 5.959 elapsed for N == 10,000

## (option b) by Ricardo Saporta
round(rowMeans(replicate(3, system.time({
    results <-
      foreach(x=unique(dt[["a"]])) %dopar%
        dt[.(x) ,list(b = paste(b, collapse=""), d = paste(d, collapse=""), e = e[[1]])]
    rbindlist(results)
}))), 3)
# [1] 5.557 elapsed for N == 10,000

registerDoSEQ()
getDoParWorkers()
# [1] 1

来源：https://stackoverflow.com/questions/19082794/speed-up-data-table-group-by-using-multiple-cores-and-parallel-programming

标签

data.table

mclapply