kubernetes 高可用的配置

标签（空格分隔）： kubernetes系列

一：kubernetes 高可用的配置

一：kubernetes 的 kubeadmn高可用的配置

image_1e5fe57c54bk19pf1urc16kk24t9.png-93.3kB

二：系统初始化

2.1 系统主机名

192.168.100.11  node01.flyfish
192.168.100.12  node02.flyfish
192.168.100.13  node03.flyfish
192.168.100.14  node04.flyfish
192.168.100.15  node05.flyfish
192.168.100.16  node06.flyfish
192.168.100.17  node07.flyfish

----

node01.flyfish / node02.flyfish /node03.flyfish  作为master 节点

node04.flyfish / node05.flyfish / node06.flyfish 作为work节点

node07.flyfish  作为 测试节点

keepalive集群VIP 地址为： 192.168.100.100

image_1e5ekelon1k88ke4eh8tfvph9.png-84.6kB

2.2 关闭firewalld 清空iptables 与 selinux 规则

系统节点全部执行：

systemctl stop firewalld && systemctl disable firewalld && yum -y install iptables-services && systemctl start iptables && systemctl enable iptables && iptables -F && service iptables save

image_1e5ekimj2rha3bi4ab1svc18kmm.png-168.9kB

关闭 SELINUX与swap 内存

swapoff -a && sed -i '/ swap / s/^\(.*\)$/#\1/g' /etc/fstab

setenforce 0 && sed -i 's/^SELINUX=.*/SELINUX=disabled/' /etc/selinux/config

image_1e5ekjkm11idhjke1j40eoakkf13.png-96.6kB

2.3 安装依赖包

全部节点安装

yum install -y conntrack ntpdate ntp ipvsadm ipset jq iptables curl sysstat libseccomp wget vim net-tools git

image_1e5ekku5ccjg13fr1cdpo7rvlu1g.png-380.6kB

2.4升级调整内核参数，对于 K8S

所有节点都执行

cat > kubernetes.conf <<EOF

net.bridge.bridge-nf-call-iptables=1 
net.bridge.bridge-nf-call-ip6tables=1 
net.ipv4.ip_forward=1 
net.ipv4.tcp_tw_recycle=0 
vm.swappiness=0 # 禁止使用 swap 空间，只有当系统 OOM 时才允许使用它 vm.overcommit_memory=1 # 不检查物理内存是否够用 
vm.panic_on_oom=0 # 开启 OOM 
fs.inotify.max_user_instances=8192 
fs.inotify.max_user_watches=1048576 
fs.file-max=52706963 
fs.nr_open=52706963 
net.ipv6.conf.all.disable_ipv6=1 
net.netfilter.nf_conntrack_max=2310720

EOF 

cp kubernetes.conf /etc/sysctl.d/kubernetes.conf 
sysctl -p /etc/sysctl.d/kubernetes.conf

image_1e5eko4qg16kt1g7i117j1hru15p41t.png-258.4kB

2.5 调整系统时区

# 设置系统时区为 中国/上海 timedatectl set-timezone Asia/Shanghai 
# 将当前的 UTC 时间写入硬件时钟 timedatectl set-local-rtc 0 
# 重启依赖于系统时间的服务 
systemctl restart rsyslog && systemctl restart crond

关闭系统不需要的服务
systemctl stop postfix && systemctl disable postfix

image_1e5ekqum213e9evpg01r3v17sb2a.png-50.5kB

2.6 设置 rsyslogd 和 systemd journald

系统全部节点

mkdir /var/log/journal # 持久化保存日志的目录 
mkdir /etc/systemd/journald.conf.d 
cat > /etc/systemd/journald.conf.d/99-prophet.conf <<EOF

[Journal]
# 持久化保存到磁盘 
Storage=persistent 
# 压缩历史日志 
Compress=yes 
SyncIntervalSec=5m 
RateLimitInterval=30s 
RateLimitBurst=1000 
# 最大占用空间 10G 
SystemMaxUse=10G 
# 单日志文件最大 200M 
SystemMaxFileSize=200M 
# 日志保存时间 2 周 
MaxRetentionSec=2week 
# 不将日志转发到 syslog 
ForwardToSyslog=no 

EOF 

systemctl restart systemd-journald

image_1e5el0stg1rf01l261ofj1gmg1ks82n.png-140.1kB

2.7升级系统内核为 4.44

CentOS 7.x 系统自带的 3.10.x 内核存在一些 Bugs，导致运行的 Docker、Kubernetes 不稳定，例如： rpm -Uvh
http://www.elrepo.org/elrepo-release-7.0-3.el7.elrepo.noarch.rpm

rpm -Uvh http://www.elrepo.org/elrepo-release-7.0-3.el7.elrepo.noarch.rpm 
# 安装完成后检查 /boot/grub2/grub.cfg 中对应内核 menuentry 中是否包含 initrd16 配置，如果没有，再安装 一次！ 
yum --enablerepo=elrepo-kernel install -y kernel-lt 
# 设置开机从新内核启动 
grub2-set-default "CentOS Linux (4.4.182-1.el7.elrepo.x86_64) 7 (Core)" 

reboot
# 重启后安装内核源文件 
yum --enablerepo=elrepo-kernel install kernel-lt-devel-$(uname -r) kernel-lt-headers-$(uname -r)

image_1e5elbe4h1l39uf73105qag9234.png-190.9kB

image_1e5elbvs38sj1bojtfik4je0b3h.png-67.1kB

2.8 kube-proxy开启ipvs的前置条件

modprobe br_netfilter 

cat > /etc/sysconfig/modules/ipvs.modules <<EOF 

#!/bin/bash 
modprobe -- ip_vs 
modprobe -- ip_vs_rr 
modprobe -- ip_vs_wrr 
modprobe -- ip_vs_sh 
modprobe -- nf_conntrack_ipv4 
EOF 

chmod 755 /etc/sysconfig/modules/ipvs.modules 

bash /etc/sysconfig/modules/ipvs.modules 

lsmod | grep -e ip_vs -e nf_conntrack_ipv4

image_1e5elhs3f1o6k4ld14hhf1gqq641.png-168.3kB

image_1e5eli9t91enb1r6s8fk1401thj4e.png-110.8kB

三：开始安装docker

3.1 安装docker

机器节点都执行：

yum install -y yum-utils device-mapper-persistent-data lvm2
yum-config-manager --add-repo http://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo 

yum update -y && yum install docker-ce-18.09.9 docker-ce-cli-18.09.9 containerd.io -y 

重启机器： reboot 

查看内核版本： uname -r 

在加载： grub2-set-default "CentOS Linux (4.4.182-1.el7.elrepo.x86_64) 7 (Core)"  && reboot
如果还不行 
就改 文件 ： vim /etc/grub2.cfg  注释掉 3.10 的 内核

保证 内核的版本 为 4.4 

service docker start 
chkconfig docker on 

## 创建 /etc/docker 目录

cat > /etc/docker/daemon.json <<EOF 

{
"exec-opts": ["native.cgroupdriver=systemd"],
"log-driver": "json-file",
"log-opts": {
 "max-size": "100m"
},

"insecure-registries": ["https://node04.flyfish"],
"registry-mirrors": ["https://registry.docker-cn.com","http://hub-mirror.c.163.com"]
}

EOF 

mkdir -p /etc/systemd/system/docker.service.d 

# 重启docker服务 

systemctl daemon-reload && systemctl restart docker && systemctl enable docker

image_1e5elqtq91e3vm5l57mngs7ec4r.png-321kB

image_1e5elrgrm6o82vs5do1a2r11c158.png-261.4kB

image_1e5elrv1l1ikn1o9m1qu72q1j5i5l.png-183.5kB

image_1e5eluv3i1v7eht9hhktge1pu162.png-257kB

image_1e5en7ilm1hvr6l816pldgr1j2cs.png-75.1kB

image_1e5en8otc1mv61m3313rmqlau449.png-17kB

安装命令补全工具
yum -y install bash-completion

source /etc/profile.d/bash_completion.sh

image_1e5f3c3vp1phl1l511q7ge0d1otc6v.png-69.6kB

image_1e5f3goqbfs2j7k1mig2fp16oe7c.png-149.6kB

镜像加速

由于Docker Hub的服务器在国外，下载镜像会比较慢，可以配置镜像加速器。主要的加速器有：Docker官方提供的中国registry mirror、阿里云加速器、DaoCloud 加速器，本文以阿里加速器配置为例。

登陆阿里云容器模块:

登陆地址为：https://cr.console.aliyun.com ,未注册的可以先注册阿里云账户

 mkdir /etc/docker

 tee /etc/docker/daemon.json <<-'EOF'
{
  "registry-mirrors": ["https://dfmo7maf.mirror.aliyuncs.com"]
}
EOF

image_1e5f3nutnne01tnat6321613k86.png-369.3kB

image_1e5f3qfq6nlbtgr10gjdl713vo9g.png-76.7kB

Cgroup Driver:

修改daemon.json
修改daemon.json，新增‘"exec-opts": ["native.cgroupdriver=systemd"]
cat /etc/docker/daemon.json

{
  "registry-mirrors": ["https://dfmo7maf.mirror.aliyuncs.com"],
   "exec-opts": ["native.cgroupdriver=systemd"]
}

修改cgroupdriver是为了消除告警：
[WARNING IsDockerSystemdCheck]: detected "cgroupfs" as the Docker cgroup driver. The recommended driver is "systemd". Please follow the guide at https://kubernetes.io/docs/setup/cri/

image_1e5f4kvhhkb01dmlainbdf11mn9t.png-42.5kB

重新加载docker
systemctl daemon-reload
systemctl restart docker

四：安装keepalived

control plane节点都执行本部分操作。
安装keepalived

yum install -y keepalived

image_1e5f54dsg1a41und1ptl169svs7b4.png-178.7kB

image_1e5f54s0t150k14rm3uv1t33nqkbh.png-176.1kB

image_1e5f55d3h1m5s1o3o1hctmt41da3bu.png-90kB

keepalived配置

node01.flyfish 配置：
cat /etc/keepalived/keepalived.conf
---
! Configuration File for keepalived
global_defs {
   router_id node01.flyfish
}
vrrp_instance VI_1 {
    state MASTER 
    interface ens33
    virtual_router_id 50
    priority 100
    advert_int 1
    authentication {
        auth_type PASS
        auth_pass 1111
    }
    virtual_ipaddress {
        192.168.100.100
    }
}

---

node02.flyfish 配置:
cat /etc/keepalived/keepalived.conf
---
! Configuration File for keepalived
global_defs {
   router_id node02.flyfish
}
vrrp_instance VI_1 {
    state BACKUP 
    interface ens33
    virtual_router_id 50
    priority 90
    advert_int 1
    authentication {
        auth_type PASS
        auth_pass 1111
    }
    virtual_ipaddress {
        192.168.100.100
    }
}

---

node03.flyfish 配置
cat /etc/keepalived/keepalived.conf
---
! Configuration File for keepalived
global_defs {
   router_id node03.flyfish
}
vrrp_instance VI_1 {
    state BACKUP 
    interface ens33
    virtual_router_id 50
    priority 90
    advert_int 1
    authentication {
        auth_type PASS
        auth_pass 1111
    }
    virtual_ipaddress {
        192.168.100.100
    }
}
---

所有control plane启动keepalived服务并设置开机启动
service keepalived start

systemctl enable keepalived

image_1e5f5qva9i6uefa1skn1n9thr1cb.png-54.9kB

vip在node01.flyfish上

image_1e5f5s1if17p21t0j112u7fo1l7qco.png-213.9kB

五： k8s安装

5.1:安装 Kubeadm （主从配置）

control plane和work节点都执行本部分操作。

cat >> /etc/yum.repos.d/kubernetes.repo << EOF
[kubernetes] 
name=Kubernetes 
baseurl=http://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64 
enabled=1 
gpgcheck=0 
repo_gpgcheck=0 
gpgkey=http://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg 
http://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg 
EOF

image_1e5epu73g1k2nqjejo31okhn3o41.png-77.8kB

yum list kubelet --showduplicates | sort -r

本文安装的kubelet版本是1.16.4，该版本支持的docker版本为1.13.1, 17.03, 17.06, 17.09, 18.06, 18.09。

image_1e5f66iho1di42dfdan1e0bqukd5.png-225.5kB


yum -y install kubeadm-1.16.4 kubectl-1.16.4 kubelet-1.16.4

---
kubelet 运行在集群所有节点上，用于启动Pod和容器等对象的工具
kubeadm 用于初始化集群，启动集群的命令工具
kubectl 用于和集群通信的命令行，通过kubectl可以部署和管理应用，查看各种资源，创建、删除和更新各种组件
---
启动kubelet:

systemctl enable kubelet && systemctl start kubelet

kubectl命令补全
echo "source <(kubectl completion bash)" >> ~/.bash_profile
source .bash_profile

image_1e5f6il6s1pp7p3613eq1aqagq0dv.png-70.8kB

5.2 下载镜像

镜像下载的脚本:

Kubernetes几乎所有的安装组件和Docker镜像都放在goolge自己的网站上,直接访问可能会有网络问题，这里的解决办法是从阿里云镜像仓库下载镜像，拉取到本地以后改回默认的镜像tag。本文通过运行image.sh脚本方式拉取镜像。

下载脚本
vim image.sh 
---
#!/bin/bash

url=registry.cn-hangzhou.aliyuncs.com/loong576

version=v1.16.4

images=(`kubeadm config images list --kubernetes-version=$version|awk -F '/' '{print $2}'`)

for imagename in ${images[@]} ; do
  docker pull $url/$imagename
  docker tag $url/$imagename k8s.gcr.io/$imagename
  docker rmi -f $url/$imagename
done

---
./image.sh 

docker images

image_1e5f76tc418vm1ufqe7l1f0c96jec.png-258.8kB

image_1e5f77mcc1mf91p5c1j281v2625lep.png-103.5kB

node01.flyfish 节点 初始化

cat kubeadm-config.yaml
---
apiVersion: kubeadm.k8s.io/v1beta2
kind: ClusterConfiguration
kubernetesVersion: v1.16.4
apiServer:
  certSANs:    #填写所有kube-apiserver节点的hostname、IP、VIP
  - node01.flyfish
  - node02.flyfish
  - node03.flyfish
  - node04.flyfish
  - node05.flyfish
  - node06.flyfish
  - 192.168.100.11
  - 192.168.100.12
  - 192.168.100.13
  - 192.168.100.14
  - 192.168.100.15
  - 192.168.100.16
  - 192.168.100.100
controlPlaneEndpoint: "192.168.100.100:6443"
networking:
  podSubnet: "10.244.0.0/16"
---

image_1e5f7kde41k5rk9o1dfb10qh2q8f6.png-125kB

初始化主机节点：

kubeadm init --config=kubeadm-config.yaml

---
Your Kubernetes control-plane has initialized successfully!

To start using your cluster, you need to run the following as a regular user:

  mkdir -p $HOME/.kube
  sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
  sudo chown $(id -u):$(id -g) $HOME/.kube/config

You should now deploy a pod network to the cluster.
Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:
  https://kubernetes.io/docs/concepts/cluster-administration/addons/

You can now join any number of control-plane nodes by copying certificate authorities 
and service account keys on each node and then running the following as root:

  kubeadm join 192.168.100.100:6443 --token 3j4th7.4va6qsj7at7ky2qs \
    --discovery-token-ca-cert-hash sha256:13d17c476688e4e78837b9cac94efa7edf689bf530a2120e2b81bf13b588fff9 \
    --control-plane       

Then you can join any number of worker nodes by running the following on each as root:

kubeadm join 192.168.100.100:6443 --token 3j4th7.4va6qsj7at7ky2qs \
    --discovery-token-ca-cert-hash sha256:13d17c476688e4e78837b9cac94efa7edf689bf530a2120e2b81bf13b588fff9 
---

image_1e5f7msnnoqh4mf1ii51j6h19f0fj.png-286.5kB

image_1e5f7ob2d1foa8tmk633st1edeh0.png-260.5kB

如果初始化失败，可执行kubeadm reset后重新初始化

kubeadm reset
rm -rf $HOME/.kube/config

加载环境变量
echo "export KUBECONFIG=/etc/kubernetes/admin.conf" >> ~/.bash_profile

source .bash_profile

image_1e5f80l981ecc1e512ti1d0hshahd.png-77.2kB

本文所有操作都在root用户下执行，若为非root用户，则执行如下操作：

mkdir -p $HOME/.kube
cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
chown $(id -u):$(id -g) $HOME/.kube/config

安装flannel网络
kubectl apply -f https://raw.githubusercontent.com/coreos/flannel/2140ac876ef134e0ed5af15c65e414cf26827915/Documentation/kube-flannel.yml

kubectl apply -f kube-flannel.yml

kubectl get pod -n kube-system

image_1e5f86k9f1mssv9e1o4s14v51bkvhq.png-97.2kB

5.3 control plane节点加入集群

证书分发
在node01.flyfish 上面执行 脚本：cert-main-master.sh
vim cert-main-master.sh
---
#!/bin/bash

USER=root # customizable
CONTROL_PLANE_IPS="192.168.100.12 192.168.100.13"
for host in ${CONTROL_PLANE_IPS}; do
    scp /etc/kubernetes/pki/ca.crt "${USER}"@$host:
    scp /etc/kubernetes/pki/ca.key "${USER}"@$host:
    scp /etc/kubernetes/pki/sa.key "${USER}"@$host:
    scp /etc/kubernetes/pki/sa.pub "${USER}"@$host:
    scp /etc/kubernetes/pki/front-proxy-ca.crt "${USER}"@$host:
    scp /etc/kubernetes/pki/front-proxy-ca.key "${USER}"@$host:
    scp /etc/kubernetes/pki/etcd/ca.crt "${USER}"@$host:etcd-ca.crt
    # Quote this line if you are using external etcd
    scp /etc/kubernetes/pki/etcd/ca.key "${USER}"@$host:etcd-ca.key
done
---

./cert-main-master.sh

image_1e5fc2c511tv8ikb152r1v09c8slf.png-115.8kB

登录 node02.flyfish

cd /root
mkdir -p /etc/kubernetes/pki

mv *.crt *.key *.pub /etc/kubernetes/pki/

cd /etc/kubernetes/pki

mkdir etcd 

mv etcd-* etcd
cd etcd
mv etcd-ca.key ca.key
mv etcd-ca.crt ca.crt

node02.flyfish 加入集群

kubeadm join 192.168.100.100:6443 --token 3j4th7.4va6qsj7at7ky2qs \
    --discovery-token-ca-cert-hash sha256:13d17c476688e4e78837b9cac94efa7edf689bf530a2120e2b81bf13b588fff9 \
    --control-plane

image_1e5fc8nh61m0a1rd8140d1d7n1ehgls.png-206.2kB

image_1e5fc971o10lufhalg47mi1gf5m9.png-255.6kB

image_1e5fc9jav1jc6r5o11g9au7nj2mm.png-171kB

登录 node03.flyfish

cd /root
mkdir -p /etc/kubernetes/pki

mv *.crt *.key *.pub /etc/kubernetes/pki/

cd /etc/kubernetes/pki

mkdir etcd 

mv etcd-* etcd
cd etcd
mv etcd-ca.key ca.key
mv etcd-ca.crt ca.crt

node03.flyfish 加入集群

kubeadm join 192.168.100.100:6443 --token 3j4th7.4va6qsj7at7ky2qs \
    --discovery-token-ca-cert-hash sha256:13d17c476688e4e78837b9cac94efa7edf689bf530a2120e2b81bf13b588fff9 \
    --control-plane

image_1e5fcarkl96k1spn1n1ghfn1llln3.png-166.6kB

image_1e5fcbd8s17di1ahbkia1hksn0png.png-338kB

image_1e5fcbsfk8fk13ho1euk6l52o1nt.png-190.1kB

node02.flyfish 与node03.flyfis 加载 环境变量

rsync -avrzP root@node01.flyfish:/etc/kubernetes/admin.conf /etc/kubernetes/

echo "export KUBECONFIG=/etc/kubernetes/admin.conf" >> ~/.bash_profile

source .bash_profile

image_1e5fatlbr198bqcko0pob13vql2.png-95.7kB

image_1e5fat8t01bu91dknddcih41ghrkl.png-166.4kB

查看节点
kubectl get node 

kubectl get pod -o wide -n kube-system

image_1e5fcf455m0913qh6bk1jq5eokoa.png-59.2kB

image_1e5fcgtgsh6fvq24to1r0i19slon.png-280.5kB

5.4 将从节点加入集群

node04.flyfish 加入 集群

kubeadm join 192.168.100.100:6443 --token 3j4th7.4va6qsj7at7ky2qs \
    --discovery-token-ca-cert-hash sha256:13d17c476688e4e78837b9cac94efa7edf689bf530a2120e2b81bf13b588fff9

image_1e5fcl3ff14rt1mec1j58ok919cp4.png-148.2kB

node05.flyfish 加入集群

kubeadm join 192.168.100.100:6443 --token 3j4th7.4va6qsj7at7ky2qs \
    --discovery-token-ca-cert-hash sha256:13d17c476688e4e78837b9cac94efa7edf689bf530a2120e2b81bf13b588fff9

image_1e5fcnb0u15k61e3r42310ca1c1jph.png-150.2kB

node06.flyfish 加入集群

kubeadm join 192.168.100.100:6443 --token 3j4th7.4va6qsj7at7ky2qs \
    --discovery-token-ca-cert-hash sha256:13d17c476688e4e78837b9cac94efa7edf689bf530a2120e2b81bf13b588fff9

image_1e5fcoki0ao51p0g1c931re735bpu.png-157.2kB

kubectl get node 

kubectl get pods -o wide -n kube-system

image_1e5fde3tlnpf1qq8acd1aag1shrqb.png-70.7kB

image_1e5fdgnpsoib1k52kokovu10fvqr.png-338.5kB

5.5 在node07.flyfish 上面进行测试

登录 node07.flyfish 

设置kubernetes源
cat <<EOF > /etc/yum.repos.d/kubernetes.repo
[kubernetes]
name=Kubernetes
baseurl=https://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64/
enabled=1
gpgcheck=1
repo_gpgcheck=1
gpgkey=https://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg https://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg

EOF

yum install -y kubectl-1.16.4

image_1e5fdmu7bit38h416271of57lor8.png-241.5kB

命令补全：

yum install -y bash-completion
source /etc/profile.d/bash_completion.sh

image_1e5fdplnfhfsa4ucj1qimuugrl.png-76.3kB

拷贝admin.conf

mkdir -p /etc/kubernetes
scp root@node01.flyfish:/etc/kubernetes/admin.conf /etc/kubernetes/
echo "export KUBECONFIG=/etc/kubernetes/admin.conf" >> ~/.bash_profile
source .bash_profile

image_1e5fdsoso1jjbelbc24par1gmes2.png-82.8kB

查看测试：

kubectl get nodes
kubectl get pod -n kube-system

image_1e5fdup9q1bpa1l1boonnle193lsf.png-67.1kB

image_1e5fdv6p413f0doq1s1jvc0bokss.png-347.4kB

5.6部署dashboard 界面

注：在node07.flyfish节点上进行如下操作

1.创建Dashboard的yaml文件

wget https://raw.githubusercontent.com/kubernetes/dashboard/v2.0.0-beta8/aio/deploy/recommended.yaml

sed -i 's/kubernetesui/registry.cn-hangzhou.aliyuncs.com\/loong576/g' recommended.yaml

sed -i '/targetPort: 8443/a\ \ \ \ \ \ nodePort: 30001\n\ \ type: NodePort' recommended.yaml

新增管理员帐号

vim recommended.yaml

到最后加上：
---
---

apiVersion: v1
kind: ServiceAccount
metadata:
  name: dashboard-admin
  namespace: kubernetes-dashboard
---

apiVersion: rbac.authorization.k8s.io/v1beta1
kind: ClusterRoleBinding
metadata:
  name: dashboard-admin
subjects:
- kind: ServiceAccount
  name: dashboard-admin
  namespace: kubernetes-dashboard
roleRef:
  apiGroup: rbac.authorization.k8s.io
  kind: ClusterRole
  name: cluster-admin

---

image_1e5fejmhs1tm71smij4e1uuh1dabm.png-208.1kB

image_1e5ffp3re17d31h9i1ma7gpgej72a.png-112.2kB

部署Dashboard

kubectl apply -f recommended.yaml

创建完成后，检查相关服务运行状态

kubectl get all -n kubernetes-dashboard 

kubectl get svc -n kubernetes-dashboard

netstat -ntlp|grep 30001

image_1e5ffrkqm11m17e11d0019kt1dnq2n.png-127.7kB

image_1e5femmt318lv1ck2r51alo1i7i1g.png-62.1kB

image_1e5ffu6lo1ib61g5gqbl1idm1kt434.png-59.6kB

在浏览器输入Dashboard访问地址：

https://192.168.100.11:30001

授权令牌

kubectl describe secrets -n kubernetes-dashboard dashboard-admin

----

image_1e5fg2dns1h6r11vgpq1k5fd5m.png-388.7kB

image_1e5fg47nbruhn2k1gmq1dbvckr13.png-495.3kB

新建一个pod
----
vim nignx.yaml

apiVersion: apps/v1             #描述文件遵循extensions/v1beta1版本的Kubernetes API
kind: Deployment                #创建资源类型为Deployment
metadata:                       #该资源元数据
  name: nginx-master            #Deployment名称
spec:                           #Deployment的规格说明
  selector:
    matchLabels:
      app: nginx
  replicas: 3                   #指定副本数为3
  template:                     #定义Pod的模板
    metadata:                   #定义Pod的元数据
      labels:                   #定义label（标签）
        app: nginx              #label的key和value分别为app和nginx
    spec:                       #Pod的规格说明
      containers:
      - name: nginx             #容器的名称
        image: nginx:latest     #创建容器所使用的镜像
----

kubectl apply -f nginx.yaml

kubectl get pod

image_1e5fgd1s4fv8d3n9ln1eog4fk1g.png-168.4kB