问题

This is a small python3 script reading off picam using OpenCV :

#picamStream.py

import sys, os
from picamera.array import PiRGBArray
from picamera import PiCamera
import time
import cv2

# initialize the camera and grab a reference to the raw camera capture
camera = PiCamera()
camera.resolution = (960, 540)
camera.framerate = 30
rawCapture = PiRGBArray(camera, size=(960, 540))

# allow the camera to warmup
time.sleep(0.1)

# capture frames from the camera
for frame in camera.capture_continuous(rawCapture, format="bgr", use_video_port=True):

    image = frame.array

    # ---------------------------------
    # .
    # Opencv image processing goes here
    # .
    # ---------------------------------

    os.write(1, image.tostring())

    # clear the stream in preparation for the next frame
    rawCapture.truncate(0)

# end

And I am trying to pipe it to ffmpeg to Youtube stream

My understanding is that I need to reference below two commands to somehow come up with a new ffmpeg command.

Piping picam live video to ffmpeg for Youtube streaming.

raspivid -o - -t 0 -vf -hf -w 960 -h 540 -fps 25 -b 1000000 | ffmpeg -re -ar 44100 -ac 2 -acodec pcm_s16le -f s16le -ac 2 -i /dev/zero -f h264 -i - -vcodec copy -acodec aac -ab 128k -g 50 -strict experimental -f flv rtmp://a.rtmp.youtube.com/live2/[STREAMKEY]

Piping OPENCV raw video to ffmpeg for mp4 file.

python3 picamStream.py | ffmpeg -f rawvideo -pixel_format bgr24 -video_size 960x540 -framerate 30 -i - foo.mp4

So far I've had no luck. Can anyone help me with this?

回答1:

This is the program I use in raspberry pi.

#main.py

import subprocess 
import cv2

cap = cv2.VideoCapture(0)
cap.set(cv2.CAP_PROP_FRAME_WIDTH, 640)
cap.set(cv2.CAP_PROP_FRAME_HEIGHT, 480)

command = ['ffmpeg',
            '-f', 'rawvideo',
            '-pix_fmt', 'bgr24',
            '-s','640x480',
            '-i','-',
            '-ar', '44100',
            '-ac', '2',
            '-acodec', 'pcm_s16le',
            '-f', 's16le',
            '-ac', '2',
            '-i','/dev/zero',   
            '-acodec','aac',
            '-ab','128k',
            '-strict','experimental',
            '-vcodec','h264',
            '-pix_fmt','yuv420p',
            '-g', '50',
            '-vb','1000k',
            '-profile:v', 'baseline',
            '-preset', 'ultrafast',
            '-r', '30',
            '-f', 'flv', 
            'rtmp://a.rtmp.youtube.com/live2/[STREAMKEY]']

pipe = subprocess.Popen(command, stdin=subprocess.PIPE)

while True:
    _, frame = cap.read()
    pipe.stdin.write(frame.tostring())

pipe.kill()
cap.release()

Youtube needs an audio source, so use -i /dev/zero.

I hope it helps you.

来源：https://stackoverflow.com/questions/43991594/piping-pis-opencv-video-to-ffmpeg-for-youtube-streaming

标签

python-3.x