How to continue past a failing stage in Jenkins declarative pipeline syntax

我是研究僧i 提交于 2019-12-20 10:01:12

问题


I want to define multiple stages in Jenkins declarative pipeline syntax which can continue past any one of them failing. I cannot find any existing questions which are true duplicates, because they all assume or allow scripted syntax.

pipeline {
    agent any
    stages {
        stage('stage 1') {
            steps {
                echo "I need to run every time"
            }
        }
        stage('stage 2') {
            steps {
                echo "I need to run every time, even if stage 1 fails"
            }
        }
        stage('stage 3') {
            steps {
                echo "Bonus points if the solution is robust enough to allow me to continue *or* be halted based on previous stage status"
            }
        }
    }
}

To clarify, I'm not looking for how to do accomplish this in scripted syntax. I'm trying to understand if this kind of flow control is actually supported and formalized in declarative syntax. To that end, I'll try to define exactly what I'm looking for:

Required

  • No try/catch. I don't want to drop down into scripted mode, or "wrap" my declarative pipeline in another shared library or scripted block.
  • No post step shenanigans. I want true multiple stages, not one stage with a post always step that contains all my other logic

Optional

  • The failing stage should be recognized as failed; I don't want a failed stage showing up as green because it was "skipped" or "continued".
  • A build with any failed stage should be marked as red (or yellow, or anything that is not green).

Related but Not Sufficient

  • How to continue a stage in jenkins pipeline even if the build fails
  • Determine Failed Stage in Jenkins Declaritive Pipeline
  • Continue Jenkins pipeline past failed stage
  • Show a Jenkins pipeline stage as failed without failing the whole job
  • Jenkins continue pipeline on failed stage

回答1:


I may be missing something, but the idea of declarative, opinionated pipeline is to provide coverage of most simple use cases. The moment you need something the opinionated hasn't covered, you HAVE to resort to scripted pipeline, this is only referring to the "requirement" of "declarative pipeline": not going to happen now.

As to your other "requirements", they make very little sense, since the whole idea is to wrap low-level ugliness into shared libraries providing users with constructs like:

    mylib.failable_stages({
      stages {
        stage('stage 1') {
          steps {
            echo "I need to run every time"
          }
        }
        stage('stage 2') {
          steps {
            echo "I need to run every time, even if stage 1 fails"
          }
        }
        stage('stage 3') {
          steps {
            echo "Bonus points if the solution is robust enough to allow me to continue *or* be halted based on previous stage status"
          }
        }
      }
    })

Naturally, you would have to find or implement such mylib class and the failable_stages would get a closure, and wrap it in various plumbing/boilerplate code pieces.

Hope this is helpful.




回答2:


This is now possible:

pipeline {
    agent any
    stages {
        stage('1') {
            steps {
                sh 'exit 0'
            }
        }
        stage('2') {
            steps {
                catchError(buildResult: 'SUCCESS', stageResult: 'FAILURE') {
                    sh "exit 1"
                }
            }
        }
        stage('3') {
            steps {
                sh 'exit 0'
            }
        }
    }
}

In the example above, all stages will execute, the pipeline will be successful, but stage 2 will show as failed:

As you might have guessed, you can freely choose the buildResult and stageResult, in case you want it to be unstable or anything else. You can even fail the build and continue the execution of the pipeline.

Just make sure your Jenkins is up to date, since this is a fairly new feature.

EDIT: This is the question that this answer was originally written for. It is also the correct answer for a few other questions, which is why I posted this answer there as well. This is the right solution for multiple similar problems. I've tailored my other answers to their specific questions to make that clear. I only copied the answer to save myself some time. That doesn't mean it's not a good correct answer.




回答3:


I think it depends on how dependent the jobs are on each other. Derived from your example I would assume that

  • stage 1 is independent from all other stages, because it is the first
  • stage 2 is independent from all other stages, because stage 1 might fail immediatly and stage 2 would still be required to run
  • stage 3 depends on the result of stage 1 and stage 2

So the correpsonding pipeline could be

pipeline {
    stages {
        stage('Independent tasks') {
            parallel {
                stage('stage 1') {
                    steps {
                        sh 'exit 1' // failure
                    }
                }
                stage('stage 2') {
                    steps {
                        echo 'Happens even so stage 1 fails'
                        sh 'exit 0' // success
                    }
                }
            }
            post {  // 'stage 3'
                failure {
                    echo "... at least one failed"
                }
                success {
                    echo "Success!"
                }
            }
        }
        stage ('stage 4') {
            steps {
                echo 'Happens only if all previous succeed'
            }
        }
    }
}

stage 1 and stage 2 will always run, stage 3 reacts on their combined success/failure.


Additional thought: This concept only works 'at the end' of your pipeline. In case you need it somewhere in the middle AND the build has to continue, you could move it into an own job and use the build job plugin.

pipeline {
    stages {
    stage('Start own job for stage 1, 2, 3') {
        steps {
            build job: 'stageOneTwoThree', propagate: false, wait: true
        }
    }
    stage ('stage 4') {
        steps {
            echo 'Happens always, because "propagate: false"'
        }
    }
}



回答4:


I achieved it using post. My requirement was to send out slack notification irrespective of the build status.

@Library('instanceGroups')
import x.z.y.jenkins.libraries.SlackNotifier

def slackHelper = new x.z.y.jenkins.libraries.SlackNotifier(env)
final String projectName = "pomeranian"
final String featureBranchPattern = "f_"

pipeline {
    agent any
    options { disableConcurrentBuilds() }

    stages {
        stage('clean') {
            steps {
                script {
                    try {
                        echo 'Current Branch...' + env.BRANCH_NAME
                        sh 'rm -rf /var/lib/jenkins/.gradle/caches'
                        sh './gradlew clean'
                    } catch (e) {
                        currentBuild.result = 'FAILURE'
                        slackHelper.buildGenericJobFailureNotificationMessage()
                        throw e
                    }
                }
            }
        }

        stage('compile') {
            steps {
                script {
                    try {
                        sh "./gradlew compileJava"
                    } catch (e) {
                        currentBuild.result = 'FAILURE'
                        slackHelper.getCompilationFailureSlackNotificationMessage()
                        throw e
                    }
                }
            }
        }

        stage('test') {
            steps {
                script {
                    try {
                        sh "./gradlew test"
                    } finally {
                        junit 'build/test-results/test/*.xml'

                        slackHelper.getTestStatuses(currentBuild)
                        slackHelper.buildUnitTestSlackNotificationMessage()
                    }
                }
            }
        }

        stage('publish 2 nexus') {
            steps {
                script {
                  // some code
                }
            }
        }

        stage('git tagging') {
            steps {
                script {
                    // some more code...
            }
        }
    }


    post {
        always {
            script {
                slackHelper.finalBuildStatusMessage(currentBuild)
                slackSend(channel: '#ci-cd', attachments: slackHelper.getFinalSlackMessage())
            }
        }
    }
}


来源:https://stackoverflow.com/questions/45021622/how-to-continue-past-a-failing-stage-in-jenkins-declarative-pipeline-syntax

易学教程内所有资源均来自网络或用户发布的内容,如有违反法律规定的内容欢迎反馈
该文章没有解决你所遇到的问题?点击提问,说说你的问题,让更多的人一起探讨吧!