问题
I'm writting a financial C# application which receive messages from the network, translate them into different object according to the message type and finaly apply the application business logic on them.
The point is that after the business logic is applied, I'm very sure I will never need this instance again. Rather than to wait for the garbage collector to free them, I'd like to explicitly "delete" them.
Is there a better way to do so in C#, should I use a pool of object to reuse always the same set of instance or is there a better strategy.
The goal being to avoid the garbage collection to use any CPU during a time critical process.
回答1:
Don't delete them right away. Calling the garbage collector for each object is a bad idea. Normally you really don't want to mess with the garbage collector at all, and even time critical processes are just race conditions waiting to happen if they're that sensitive.
But if you know you'll have busy vs light load periods for your app, you might try a more general GC.Collect() when you reach a light period to encourage cleanup before the next busy period.
回答2:
Look here: http://msdn.microsoft.com/en-us/library/bb384202.aspx
You can tell the garbage collector that you're doing something critical at the moment, and it will try to be nice to you.
回答3:
You hit in yourself -- use a pool of objects and reuse those objects. The semantics of the calls to those object would need to be hidden behind a factory facade. You'll need to grow the pool in some pre-defined way. Perhaps double the size everytime it hits the limit -- a high water algorithm, or a fixed percentage. I'd really strongly advise you not to call GC.Collect().
When the load on your pool gets low enough you could shrink the pool and that will eventually trigger a garbage collection -- let the CLR worry about it.
回答4:
Attempting to second-guess the garbage collector is generally a very bad idea. On Windows, the garbage collector is a generational one and can be relied upon to be pretty efficient. There are some noted exceptions to this general rule - the most common being the occurrence of a one-time event that you know for a fact will have caused a lot of old objects to die - once objects are promoted to Gen2 (the longest lived) they tend to hang around.
In the case you mention, you sound as though you are generating a number of short-lived objects - these will result in Gen0 collections. These happen relatively often anyway, and are the most efficient. You could avoid them by having a reusable pool of objects, if you prefer, but it is best to ascertain for certain if GC is a performance problem before taking such action - the CLR profiler is the tool for doing this.
It should be noted that the garbage collector is different on different .NET frameworks - on the compact framework (which runs on the Xbox 360 and on mobile platforms) it is a non-generational GC and as such you must be much more careful about what garbage your program generates.
回答5:
Forcing a GC.Collect() is generally a bad idea, leave the GC to do what it does best. It sounds like the best solution would be to use a pool of objects that you can grow if necessary - I've used this pattern successfully.
This way you avoid not only the garbage collection but the regular allocation cost as well.
Finally, are you sure that the GC is causing you a problem? You should probably measure and prove this before implementing any perf-saving solutions - you may be causing yourself unnecessary work!
回答6:
"The goal being to avoid the garbage collection to use any CPU during a time critical process"
Q: If by time critical, you mean you're listening to some esoteric piece of hardware, and you can't afford to miss the interrupt?
A: If so then C# isn't the language to use, you want Assembler, C or C++ for that.
Q: If by time Critical, you mean while there are lots of messages in the pipe, and you don't want to let the Garbage collector slow things down?
A: If so you are worrying needlessly. By the sounds of things your objects are very short lived, this means the garbage collector will recycle them very efficiently, without any apparent lag in performance.
However, the only way to know for sure is test it, set it up to run overnight processing a constant stream of test messages, I'll be stunned if you your performance stats can spot when the GC kicks in (and even if you can spot it, I'll be even more surprised if it actually matters).
回答7:
Get a good understanding and feel on how the Garbage Collector behaves, and you will understand why what you are thinking of here is not recommended. unless you really like the CLR to spend time rearranging objects in memory alot.
- http://msdn.microsoft.com/en-us/magazine/bb985010.aspx
- http://msdn.microsoft.com/en-us/magazine/bb985011.aspx
回答8:
How intensive is the app? I wrote an app that captures 3 sound cards (Managed DirectX, 44.1KHz, Stereo, 16-bit), in 8KB blocks, and sends 2 of the 3 streams to another computer via TCP/IP. The UI renders an audio level meter and (smooth) scrolling title/artist for each of the 3 channels. This runs on PCs with XP, 1.8GHz, 512MB, etc. The App uses about 5% of the CPU.
I stayed clear of manually calling GC methods. But I did have to tune a few things that were wasteful. I used RedGate's Ant profiler to hone in on the wasteful portions. An awesome tool!
I wanted to use a pool of pre-allocated byte arrays, but the managed DX Assembly allocates byte buffers internally, then returns that to the App. It turned out that I didn't have to.
回答9:
If it is absolutely time critical then you should use a deterministic platform like C/C++. Even calling GC.Collect() will generate CPU cycles.
Your question starts off with the suggestion that you want to save memory but getting rid of objects. This is a space critical optimization. You need to decide what you really want because the GC is better at optimizing this situation than a human.
回答10:
From the sound of it, it seems like you're talking about deterministic finalization (destructors in C++), which doesn't exist in C#. The closest thing that you will find in C# is the Disposable pattern. Basically you implement the IDisposable interface.
The basic pattern is this:
public class MyClass: IDisposable
{
private bool _disposed;
public void Dispose()
{
Dispose( true );
GC.SuppressFinalize( this );
}
protected virtual void Dispose( bool disposing )
{
if( _disposed )
return;
if( disposing )
{
// Dispose managed resources here
}
_disposed = true;
}
}
回答11:
You could have a limited amount of instances of each type in a pool, and reuse the already done with instances. The size of the pool would depend on the amount of messages you'll be processing.
回答12:
Instead of creating a new instance of an object every time you get a message, why don't you reuse objects that have already been used? This way you won't be fighting against the garbage collector and your heap memory won't be getting fragmented.**
For each message type, you can create a pool to hold the instances that are not in use. Whenever you receive a network message, you look at the message type, pull a waiting instance out of the appropriate pool and apply your business logic. After that, you put that instance of the message object back into it's pool.
You will most likely want to "lazy load" your pool with instances so your code scales easily. Therefore, your pool class will need to detect when a null instance has been pulled and fill it up before handing it out. Then when the calling code puts it back in the pool it's a real instance.
** "Object pooling is a pattern to use that allows objects to be reused rather than allocated and deallocated, which helps to prevent heap fragmentation as well as costly GC compactions."
http://geekswithblogs.net/robp/archive/2008/08/07/speedy-c-part-2-optimizing-memory-allocations---pooling-and.aspx
回答13:
In theory the GC shouldn't run if your CPU is under heavy load or unless it really needs to. But if you have to, you may want to just keep all of your objects in memory, perhaps a singleton instance, and never clean them up unless you're ready. That's probably the only way to guarantee when the GC runs.
来源：https://stackoverflow.com/questions/85283/how-to-avoid-garbage-collection-in-real-time-net-application