问题
I need to draw concentric arcs of various sizes using raphael.js. I tried to understand the code behind http://raphaeljs.com/polar-clock.html, which is very similar to what I want, but, whithout comments, it is quite difficult to fathom.
Ideally, I would need a function that creates a path that is at a given distance from some center point, starts at some angle and ends at some other angle.
回答1:
That answer is ok, but cant be animated. I ripped the important stuff out of polar-clock for you. Here is a red arc that animates growing. enjoy.
// Custom Arc Attribute, position x&y, value portion of total, total value, Radius
var archtype = Raphael("canvas", 200, 100);
archtype.customAttributes.arc = function (xloc, yloc, value, total, R) {
var alpha = 360 / total * value,
a = (90 - alpha) * Math.PI / 180,
x = xloc + R * Math.cos(a),
y = yloc - R * Math.sin(a),
path;
if (total == value) {
path = [
["M", xloc, yloc - R],
["A", R, R, 0, 1, 1, xloc - 0.01, yloc - R]
];
} else {
path = [
["M", xloc, yloc - R],
["A", R, R, 0, +(alpha > 180), 1, x, y]
];
}
return {
path: path
};
};
//make an arc at 50,50 with a radius of 30 that grows from 0 to 40 of 100 with a bounce
var my_arc = archtype.path().attr({
"stroke": "#f00",
"stroke-width": 14,
arc: [50, 50, 0, 100, 30]
});
my_arc.animate({
arc: [50, 50, 40, 100, 30]
}, 1500, "bounce");
回答2:
Here's how I have done it. The following code allows you to specify a start and end angle as well as an inner and outer radius (useful for doing those trendy donut style pie charts). The solution doesn't rely on approximating a curve with line segments and can be animated as per the clock example mentioned in the original question.
First create your Raphael drawing area; the following assumes a div with id "raphael_paper" in your HTML file:
var paper = Raphael("raphael_paper", 800, 800);
to this Raphael object we add a custom arc attribute, a function which takes the center of a circle (x and y coords), a start angle, an end angle, an inner radius and an outer radius:
paper.customAttributes.arc = function (centerX, centerY, startAngle, endAngle, innerR, outerR) {
var radians = Math.PI / 180,
largeArc = +(endAngle - startAngle > 180);
// calculate the start and end points for both inner and outer edges of the arc segment
// the -90s are about starting the angle measurement from the top get rid of these if this doesn't suit your needs
outerX1 = centerX + outerR * Math.cos((startAngle-90) * radians),
outerY1 = centerY + outerR * Math.sin((startAngle-90) * radians),
outerX2 = centerX + outerR * Math.cos((endAngle-90) * radians),
outerY2 = centerY + outerR * Math.sin((endAngle-90) * radians),
innerX1 = centerX + innerR * Math.cos((endAngle-90) * radians),
innerY1 = centerY + innerR * Math.sin((endAngle-90) * radians),
innerX2 = centerX + innerR * Math.cos((startAngle-90) * radians),
innerY2 = centerY + innerR * Math.sin((startAngle-90) * radians);
// build the path array
var path = [
["M", outerX1, outerY1], //move to the start point
["A", outerR, outerR, 0, largeArc, 1, outerX2, outerY2], //draw the outer edge of the arc
["L", innerX1, innerY1], //draw a line inwards to the start of the inner edge of the arc
["A", innerR, innerR, 0, largeArc, 0, innerX2, innerY2], //draw the inner arc
["z"] //close the path
];
return {path: path};
};
now we can use this to draw arcs of a specified thickness, starting and ending wherever we want them to eg.
var redParams = {stroke: "#f00", "stroke-width": 1, fill:"#eee"},
greenParams = {stroke: "#0f0", "stroke-width": 1, fill:"#eee"},
blueParams = {stroke: "#00f", "stroke-width": 1, fill:"#eee"},
cx = 300, cy = 300, innerRadius = 100, outerRadius = 250,
var red = paper.path().attr(redParams).attr({arc: [cx, cy, 0, 90, innerRadius, outerRadius]});
var green = paper.path().attr(greenParams).attr({arc: [cx, cy, 270, 320, innerRadius, outerRadius]});
var blue = paper.path().attr(blueParams).attr({arc: [cx, cy, 95, 220, innerRadius, outerRadius]});
This should result in three grey arc segments with red, blue and green 1px borders.
回答3:
Actually found the answer myself. I first thought of something fancy involving bezier curves, but this just works.
-> creates a path using SVG path syntax, which works as is with raphael
function arc(center, radius, startAngle, endAngle) {
angle = startAngle;
coords = toCoords(center, radius, angle);
path = "M " + coords[0] + " " + coords[1];
while(angle<=endAngle) {
coords = toCoords(center, radius, angle);
path += " L " + coords[0] + " " + coords[1];
angle += 1;
}
return path;
}
function toCoords(center, radius, angle) {
var radians = (angle/180) * Math.PI;
var x = center[0] + Math.cos(radians) * radius;
var y = center[1] + Math.sin(radians) * radius;
return [x, y];
}
回答4:
Just to remove some guesswork from user592699's answer, this is the complete code that works:
<script src="raphael.js"></script>
<script>
var paper = Raphael(20, 20, 320, 320);
function arc(center, radius, startAngle, endAngle) {
angle = startAngle;
coords = toCoords(center, radius, angle);
path = "M " + coords[0] + " " + coords[1];
while(angle<=endAngle) {
coords = toCoords(center, radius, angle);
path += " L " + coords[0] + " " + coords[1];
angle += 1;
}
return path;
}
function toCoords(center, radius, angle) {
var radians = (angle/180) * Math.PI;
var x = center[0] + Math.cos(radians) * radius;
var y = center[1] + Math.sin(radians) * radius;
return [x, y];
}
paper.path(arc([100, 100], 80, 0, 270)); // draw an arc
// centered at (100, 100),
// radius 80, starting at degree 0,
// beginning at coordinate (80, 0)
// which is relative to the center
// of the circle,
// going clockwise, until 270 degree
</script>
回答5:
For those who want the arc to be made with closed path and not stroke, I have extended genkilabs answer to make a solution. In cases when you need to give outer stroke to your arc, this might help.
// Custom Arc Attribute, position x&y, value portion of total, total value, Radius, width
var archtype = Raphael("canvas", 200, 100);
archtype.customAttributes.arc = function (xloc, yloc, value, total, R, width) {
if(!width) width = R * 0.4;
var alpha = 360 / total * value,
a = (90 - alpha) * Math.PI / 180,
w = width / 2,
r1 = R + w,
r2 = R - w,
x1 = xloc + r1 * Math.cos(a),
y1 = yloc - r1 * Math.sin(a),
x2 = xloc + r2 * Math.cos(a),
y2 = yloc - r2 * Math.sin(a),
path;
if (total == value) {
path = [
["M", xloc, yloc - r1],
["A", r1, r1, 0, 1, 1, xloc - 0.01, yloc - r1],
["Z"],
["M", xloc - 0.01, yloc - r2],
["A", r2, r2, 0, 1, 0, xloc, yloc - r2],
["Z"]
];
} else {
path = [
["M", xloc, yloc - r1],
["A", r1, r1, 0, +(alpha > 180), 1, x1, y1],
["L", x2, y2],
["A", r2, r2, 0, +(alpha > 180), 0, xloc, yloc - r2],
["L", xloc, yloc - r1],
["Z"]
];
}
return {
path: path
};
};
//make an arc at 50,50 with a radius of 30 that grows from 0 to 40 of 100 with a bounce
var my_arc = archtype.path().attr({
"fill": "#00f",
"stroke": "#f00",
"stroke-width": 5,
arc: [50, 50, 0, 100, 30]
});
my_arc.animate({
arc: [50, 50, 40, 100, 30]
}, 1500, "bounce");
JSFiddle
回答6:
You can also do this without having to use loops. The following achieves this and works with negative angles as well.
Pass in a Raphael object as r. The angles start with 0 degrees, which is the top of the circle rather than the right as was listed in a couple of other solutions.
function drawArc(r, centerX, centerY, radius, startAngle, endAngle) {
var startX = centerX+radius*Math.cos((90-startAngle)*Math.PI/180);
var startY = centerY-radius*Math.sin((90-startAngle)*Math.PI/180);
var endX = centerX+radius*Math.cos((90-endAngle)*Math.PI/180);
var endY = centerY-radius*Math.sin((90-endAngle)*Math.PI/180);
var flg1 = 0;
if (startAngle>endAngle)
flg1 = 1;
else if (startAngle<180 && endAngle<180)
flg1 = 0;
else if (startAngle>180 && endAngle>180)
flg1 = 0;
else if (startAngle<180 && endAngle>180)
flg1 = 0; // edited for bugfix here, previously this was 1
else if (startAngle>180 && endAngle<180)
flg1 = 1;
return r.path([['M',startX, startY],['A',radius,radius,0,flg1,1,endX,endY]]);
};
回答7:
I have adapted genkilabs answer to include rotation and inversion abilities. Also, how much of the ring is filled was changed to a single-number percent. (The inversion was adapted from this post). Hope it's helpful!
paper.customAttributes.arc = function (xloc, yloc, percent, rad, rot, invert) {
var alpha = 3.6 * percent,
a = (90 - alpha) * Math.PI / 180,
x = xloc + rad * Math.cos(a),
y = yloc - rad * Math.sin(a),
path;
if (invert) {
x = xloc - rad * Math.cos(a);
}
if (percent >= 100) {
path = [
["M", xloc, yloc - rad],
["A", rad, rad, 0, 1, 1, xloc - 0.01, yloc - rad]
];
} else {
path = [
["M", xloc, yloc - rad],
["A", rad, rad, 0, +(alpha > 180), +(!invert), x, y]
];
}
return {
path: path,
transform: "r"+rot+","+xloc+","+yloc,
};
};
来源：https://stackoverflow.com/questions/5061318/drawing-centered-arcs-in-raphael-js