BMW ICOM A2+B+C is upgrade of BMW ICOM, ICOM A2 is Second generation of BMW ISTA Diagnose and programming system. Support both new and old BMW vehicles.
BMW ICOM A2:
Software Version : 2016.07
ISTA/D (ISID /DiagnosticISTA-D 3.55.31 ISTA-P 3.59.0.600
VIN: 2016.06.15
BMW ICOM :
1. Support Multi-language: American English, British English, German,
Spanish, French, Italian, Polish, Portuguese, Turkish, Czech, Swedish,
Dutch, Indian, Greek, Russian, Japanese, Korean, Thai, Simplified
Chinese and Traditional Chinese
2. Hardware Version: ICOM Application-01.40.05
3. Support Vehicles: BMW Cars, BMW Motorcycle, Rolls-Royce, Mini Cooper
4. Support BMW All Series Diagnose and Programming
* Interface A2 – OBD diagnostic supporting MOST, D-CAN and K-CAN protocols.
* Interface B – diagnostic via MOST bus, and have connection to A-interface via USB connection.
* Interface C – 20-pin cable for old models.
BMW ICOM A2+B+C Special Features Compared with ICOM :
* The modified ICOM A2
for vehicles with OBD access receives a significantly more powerful
processor and more storage capacity.Robust aluminium case will help to
avoid damage when using in harsh environments.
* To protect the MOST connector, the ICOM B for vehicles with optical
MOST access will be equipped with a soft cover made of rubber instead of
the former plastic cap.
* The ICOM C for old series with a diagnostics socket will be
additionally equipped with an approx. 20 cm long cable, which
facilitates the connection of the ICOM A2 and makes storage in the
engine compartment easier.
FAQ of ICOM A2:
Q1: Is there any diagnostic equipment can do BMW530 DA 2003 ? It is better in French
A1: Try to use the BMW ICOM A2
Q2: Does the BMW ICOM A2 have the installation manual?
A2: Inset the hard disk into the computer and input password BMW, you’ll find the installation manual.
Q3: BMW ICOM A2 (SP168-B) can do the BMW old car before 2000?
A3: You can do the old BMW car, if the car can not be done, then try for a few more cars
Q4: 2013 New BMW ICOM A2 + B + C Diagnostic & Programming Tool (SP168-B) can be programmed to control template EGS?
A4: Yes The entire vehicle control unit can be programmed