Command Prompt Error 'C:\Program' is not recognized as an internal or external command, operable program or batch file

狂风中的少年 提交于 2019-11-26 14:04:15

问题


I am trying to run the following batch command. The command has been extracted from the IDE so is confirmed working. Getting the error mentioned below.

I have tried a few variations with double quotes but they haven't worked. Even on powershell it has the same message.

C:\Program Files\IAR Systems\Embedded Workbench 7.0\430\bin\icc430.exe F:\CP001\source\Meter\Main.c -D Hardware_P20E -D Calibration_code -D _Optical -D _Configuration_TS0382 -o F:\CP001\Temp\C20EO\Obj\ --no_cse --no_unroll --no_inline --no_code_motion --no_tbaa --debug -D__MSP430F425 -e --double=32 --dlib_config C:\Program Files\IAR Systems\Embedded Workbench 7.0\430\lib\dlib\dl430fn.h -Ol --multiplier=16 --segment __data16=DATA16 --segment __data20=DATA20

Update:

Trying the solution with quotes confuses the compiler in some way


回答1:


If a directory has spaces in, put quotes around it. This includes the program you're calling, not just the arguments

"C:\Program Files\IAR Systems\Embedded Workbench 7.0\430\bin\icc430.exe" "F:\CP001\source\Meter\Main.c" -D Hardware_P20E -D Calibration_code -D _Optical -D _Configuration_TS0382 -o "F:\CP001\Temp\C20EO\Obj\" --no_cse --no_unroll --no_inline --no_code_motion --no_tbaa --debug -D__MSP430F425 -e --double=32 --dlib_config "C:\Program Files\IAR Systems\Embedded Workbench 7.0\430\lib\dlib\dl430fn.h" -Ol --multiplier=16 --segment __data16=DATA16 --segment __data20=DATA20



回答2:


This seems to happen from time to time with programs that are very sensitive to command lines, but one option is to just use the DOS path instead of the Windows path. This means that C:\Program Files\ would resolve to C:\PROGRA~1\ and generally avoid any issues with spacing.

To get the short path you can create a quick Batch file that echos the short path:

@ECHO OFF
echo %~s1

Which is then called as follows:

C:\>shortPath.bat "C:\Program Files"
C:\PROGRA~1



回答3:


You just need to keep Program Files in double quote & rest of the command don't need any quote.

C:\"Program Files"\IAR Systems\Embedded Workbench 7.0\430\bin\icc430.exe F:\CP00 .....



回答4:


I encountered a similar problem using windows command line for R script, Rscript.exe, which is very sensitive to spaces in the path. The solution was to create a virtual path to the binary folder using the windows subst command.

The following fails: "C:\Program Files\R\R-3.4.0\bin\Rscript.exe"

Doing following succeeds:

subst Z: "C:\Program Files\R\R-3.4.0"
Z:\bin\Rscript.exe

The reason the above-proposed solutions didn't work, evidently, has to do with the Rscript.exe executable's own internal path resolution from its working directory (which has a space in it) rather the windows command line being confused with the space. So using ~ or " to resolve the issue at the command line is moot. The executable must be called within a path lacking spaces.




回答5:


I believe James Hunt's answer will solve the problem.

@user3731784: In your new message, the compiler seems to be confused because of the "C:\Program Files\IAR systems\Embedded Workbench 7.0\430\lib\dlib\d1430fn.h" argument. Why are you giving this header file at the middle of other compiler switches? Please correct this and try again. Also, it probably is a good idea to give the source file name after all the compiler switches and not at the beginning.




回答6:


Go to Start and search for cmd. Right click on it, properties then set the Target path in quotes. This worked fine for me.



来源:https://stackoverflow.com/questions/24904945/command-prompt-error-c-program-is-not-recognized-as-an-internal-or-external-c

易学教程内所有资源均来自网络或用户发布的内容,如有违反法律规定的内容欢迎反馈
该文章没有解决你所遇到的问题?点击提问,说说你的问题,让更多的人一起探讨吧!