wowza

android stream real time video to streaming server

由 瘦欲@ 提交于 2021-02-10 20:37:56
问题 I am trying to develop a half duplex chat application where one android device will capture video from cam and send this real time video stream to server. Thereafter, another android device is capturing the same video stream from the streaming server and rendering the video on screen. I successfully did this using WebRTC API, Vitamio API and wowza streaming server. But, this method is resulting in a very poor video quality at receiver's end with poor video quality and huge latency even on

android stream real time video to streaming server

由 限于喜欢 提交于 2021-02-10 20:34:45
问题 I am trying to develop a half duplex chat application where one android device will capture video from cam and send this real time video stream to server. Thereafter, another android device is capturing the same video stream from the streaming server and rendering the video on screen. I successfully did this using WebRTC API, Vitamio API and wowza streaming server. But, this method is resulting in a very poor video quality at receiver's end with poor video quality and huge latency even on

Extract frames as images from an RTMP stream in real-time

由 给你一囗甜甜゛ 提交于 2021-02-08 10:22:03
问题 I am streaming short videos (4 or 5 seconds) encoded in H264 at 15 fps in VGA quality from different clients to a server using RTMP which produced an FLV file. I need to analyse the frames from the video as images as soon as possible so I need the frames to be written as PNG images as they are received. Currently I use Wowza to receive the streams and I have tried using the transcoder API to access the individual frames and write them to PNGs. This partially works but there is about a second

h.264 live stream

由 浪子不回头ぞ 提交于 2020-05-28 08:04:37
问题 After reasearching for a few days, i m still lost with this issue: I have a webcam connected over WiFi to my Android device. I wrote an Android app to connect to a specified Socket of the webcam (IP and port). From this Socket i get an InputStream which is already encoded in H.264. Then i redirect this InputStream from the android device to my server, where i managed to decode it to images/frame by using Xuggler. I would like to stream my webcam live to the internet to a flash player or

h.264 live stream

由 时光毁灭记忆、已成空白 提交于 2020-05-28 08:01:36
问题 After reasearching for a few days, i m still lost with this issue: I have a webcam connected over WiFi to my Android device. I wrote an Android app to connect to a specified Socket of the webcam (IP and port). From this Socket i get an InputStream which is already encoded in H.264. Then i redirect this InputStream from the android device to my server, where i managed to decode it to images/frame by using Xuggler. I would like to stream my webcam live to the internet to a flash player or

SRT技术|Wowza流服务器下接收发送SRT流

由 别等时光非礼了梦想. 提交于 2020-04-03 17:46:14
一、Wowza服务器准备 Wowza安装在Linux或 Windows系统下； Wowza 4.7.2版本仅支持SRT的接收，如果需要发送SRT则需要安装4.7.3或者更高的版本； Wowza支持SRT版本为1.1，并且只能接收和发送通过MPEG-TS打包的SRT流。 注：登录后首先需要打开RTSP和RTMP身份认证为不需要认证. 二、Wowza 接收SRT流 登录Wowza接收SRT流，首先需要创建一个SRT属性的流文件。 1、点击“Application”--“Stream Files”--“Add Stream file”,输入流文件名称”srt”,流URL地址为：srt://Wowza-ip地址:监听端口。点击“Add”保存。 注：监听端口为SRT发送方配置的端口。 2、点击“Properties”,设置SRT接收参数，默认加密方式为不加密，延时为400ms，仅支持通过MPEG-TS打包的SRT流。根据SRT发送方参数对应配置。 3、然后在弹出的对话框，下拉MediaCaster Type 选项框，选择SRT，点击保存使SRT协议开始接收。 4、千视编码器（SRT发送方）配置。握手模式为CALLER,地址为Wowza服务器地址，端口和接收方保持一致。 5、点击“Incoming Streams”，刷新查看流接收状态。流状态为“Active”为正常连接。 6、页面右上角

wowza java api inject captioning

由 狂风中的少年 提交于 2020-01-25 13:57:33
问题 We have a bunch of .mp4 files along with their associated .ttml open caption files. We are using Wowza to dynamically load and stream these files based on a dynamic schedule without interrupting the stream. I was able to follow the tutorial here ( https://www.wowza.com/docs/how-to-use-ipublishingprovider-api-to-publish-server-side-live-streams ) to stream individual mp4 files at specified times. However, I could not find a Java API command to inject an associated caption files. I found this

Sending Jcodec H264 Encoded RTMP Message to Wowza

由 倾然丶 夕夏残阳落幕 提交于 2020-01-15 12:48:05
问题 I am making screen share java based application. I am done with encoding frames into H264 using JCodec java Library. I have Picture data in Byte Buffer. How I will send these encoded frames to Wowza through rtmp client? Can Wowza recognize the H264 encoded frames, Encoded by Jcodec library? 回答1: Pretty much any of the "flash" media servers will understand h264 data in a stream. You'll need to encode your frames with baseline or main profile and then "package" the encoded bytes into flv

Cannot bind to port 80, Microsoft-HTTPAPI/2.0 Lock

由 心已入冬 提交于 2020-01-06 20:24:17
问题 So, I've been trying to bind Wowza media server to port 80 on our fail-over production server, and I'm encountering something else being bound to the port. The process reports as 'System' with PID 4. After chasing myself around the web for a while, I found numerous indicators that it could be IIS, MSSQL, Microsoft's Web Deployment Service, or even the Branch Cache service. After exploring all of these options, as well as a couple more that relate specifically to this server, I can say that

Wowza: Need to stream rtp-live to iphone

由 吃可爱长大的小学妹 提交于 2020-01-04 07:15:43
问题 I need to stream rtp-live to iphone. My channels are configured in SDP files. When I request channels from Flash player, I have a plug-in that starts streaming data to Wowza once it detects the request. This way I don't need to publish the streams. When I try to watch from iphone, I get error since the stream is not published. If I watch a channel from Flash player and then try to watch from iphone, then it works because the stream is automatically published. If I stop watching from Flash
订阅 wowza