Benefits of inline functions in C++?

问题

What is the advantages/disadvantages of using inline functions in C++? I see that it only increases performance for the code that the compiler outputs, but with today\'s optimized compilers, fast CPUs, huge memory etc. (not like in the 1980< where memory was scarce and everything had to fit in 100KB of memory) what advantages do they really have today?

回答1:

Inline functions are faster because you don't need to push and pop things on/off the stack like parameters and the return address; however, it does make your binary slightly larger.

Does it make a significant difference? Not noticeably enough on modern hardware for most. But it can make a difference, which is enough for some people.

Marking something inline does not give you a guarantee that it will be inline. It's just a suggestion to the compiler. Sometimes it's not possible such as when you have a virtual function, or when there is recursion involved. And sometimes the compiler just chooses not to use it.

I could see a situation like this making a detectable difference:

inline int aplusb_pow2(int a, int b) {
  return (a + b)*(a + b) ;
}

for(int a = 0; a < 900000; ++a)
    for(int b = 0; b < 900000; ++b)
        aplusb_pow2(a, b);

回答2:

Advantages

By inlining your code where it is needed, your program will spend less time in the function call and return parts. It is supposed to make your code go faster, even as it goes larger (see below). Inlining trivial accessors could be an example of effective inlining.
By marking it as inline, you can put a function definition in a header file (i.e. it can be included in multiple compilation unit, without the linker complaining)

Disadvantages

It can make your code larger (i.e. if you use inline for non-trivial functions). As such, it could provoke paging and defeat optimizations from the compiler.
It slightly breaks your encapsulation because it exposes the internal of your object processing (but then, every "private" member would, too). This means you must not use inlining in a PImpl pattern.
It slightly breaks your encapsulation 2: C++ inlining is resolved at compile time. Which means that should you change the code of the inlined function, you would need to recompile all the code using it to be sure it will be updated (for the same reason, I avoid default values for function parameters)
When used in a header, it makes your header file larger, and thus, will dilute interesting informations (like the list of a class methods) with code the user don't care about (this is the reason that I declare inlined functions inside a class, but will define it in an header after the class body, and never inside the class body).

Inlining Magic

The compiler may or may not inline the functions you marked as inline; it may also decide to inline functions not marked as inline at compilation or linking time.
Inline works like a copy/paste controlled by the compiler, which is quite different from a pre-processor macro: The macro will be forcibly inlined, will pollute all the namespaces and code, won't be easily debuggable, and will be done even if the compiler would have ruled it as inefficient.
Every method of a class defined inside the body of the class itself is considered as "inlined" (even if the compiler can still decide to not inline it
Virtual methods are not supposed to be inlinable. Still, sometimes, when the compiler can know for sure the type of the object (i.e. the object was declared and constructed inside the same function body), even a virtual function will be inlined because the compiler knows exactly the type of the object.
Template methods/functions are not always inlined (their presence in an header will not make them automatically inline).
The next step after "inline" is template metaprograming . I.e. By "inlining" your code at compile time, sometimes, the compiler can deduce the final result of a function... So a complex algorithm can sometimes be reduced to a kind of return 42 ; statement. This is for me extreme inlining. It happens rarely in real life, it makes compilation time longer, will not bloat your code, and will make your code faster. But like the grail, don't try to apply it everywhere because most processing cannot be resolved this way... Still, this is cool anyway...
:-p

回答3:

In archaic C and C++, inline is like register: a suggestion (nothing more than a suggestion) to the compiler about a possible optimization.

In modern C++, inline tells the linker that, if multiple definitions (not declarations) are found in different translation units, they are all the same, and the linker can freely keep one and discard all the other ones.

inline is mandatory if a function (no matter how complex or "linear") is defined in a header file, to allow multiple sources to include it without getting a "multiple definition" error by the linker.

Member functions defined inside a class are "inline" by default, as are template functions (in contrast to global functions).

//fileA.h
inline void afunc()
{ std::cout << "this is afunc" << std::endl; }

//file1.cpp
#include "fileA.h"
void acall()
{ afunc(); }

//main.cpp
#include "fileA.h"
void acall();

int main()
{ 
   afunc(); 
   acall();
}

//output
this is afunc
this is afunc

Note the inclusion of fileA.h into two .cpp files, resulting in two instances of afunc(). The linker will discard one of them. If no inline is specified, the linker will complain.

回答4:

Inlining is a suggestion to the compiler which it is free to ignore. It's ideal for small bits of code.

If your function is inlined, it's basically inserted in the code where the function call is made to it, rather than actually calling a separate function. This can assist with speed as you don't have to do the actual call.

It also assists CPUs with pipelining as they don't have to reload the pipeline with new instructions caused by a call.

The only disadvantage is possible increased binary size but, as long as the functions are small, this won't matter too much.

I tend to leave these sorts of decisions to the compilers nowadays (well, the smart ones anyway). The people who wrote them tend to have far more detailed knowledge of the underlying architectures.

回答5:

Inline function is the optimization technique used by the compilers. One can simply prepend inline keyword to function prototype to make a function inline. Inline function instruct compiler to insert complete body of the function wherever that function got used in code.

Advantages :-

It does not require function calling overhead.
It also save overhead of variables push/pop on the stack, while function calling.
It also save overhead of return call from a function.
It increases locality of reference by utilizing instruction cache.
After in-lining compiler can also apply intra-procedural optimization if specified. This is the most important one, in this way compiler can now focus on dead code elimination, can give more stress on branch prediction, induction variable elimination etc..

To check more about it one can follow this link http://tajendrasengar.blogspot.com/2010/03/what-is-inline-function-in-cc.html

回答6:

I'd like to add that inline functions are crucial when you are building shared library. Without marking function inline, it will be exported into the library in the binary form. It will be also present in the symbols table, if exported. On the other side, inlined functions are not exported, neither to the library binaries nor to the symbols table.

It may be critical when library is intended to be loaded at runtime. It may also hit binary-compatible-aware libraries. In such cases don't use inline.

回答7:

During optimization many compilers will inline functions even if you didn't mark them. You generally only need to mark functions as inline if you know something the compiler doesn't, as it can usually make the correct decision itself.

回答8:

inline allows you to place a function definition in a header file and #include that header file in multiple source files without violating the one definition rule.

回答9:

Generally speaking, these days with any modern compiler worrying about inlining anything is pretty much a waste of time. The compiler should actually optimize all of these considerations for you through its own analysis of the code and your specification of the optimization flags passed to the compiler. If you care about speed, tell the compiler to optimize for speed. If you care about space, tell the compiler to optimize for space. As another answer alluded to, a decent compiler will even inline automatically if it really makes sense.

Also, as others have stated, using inline does not guarantee inline of anything. If you want to guarantee it, you will have to define a macro instead of an inline function to do it.

When to inline and/or define a macro to force inclusion? - Only when you have a demonstrated and necessary proven increase in speed for a critical section of code that is known to have an affect on the overall performance of the application.

回答10:

It is not all about performance. Both C++ and C are used for embedded programming, sitting on top of hardware. If you would, for example, write an interrupt handler, you need to make sure that the code can be executed at once, without additional registers and/or memory pages being being swapped. That is when inline comes in handy. Good compilers do some "inlining" themselves when speed is needed, but "inline" compels them.

回答11:

Fell into the same trouble with inlining functions into so libraries. It seems that inlined functions are not compiled into the library. as a result the linker puts out a "undefined reference" error, if a executable wants to use the inlined function of the library. (happened to me compiling Qt source with gcc 4.5.

回答12:

Why not make all functions inline by default? Because it's an engineering trade off. There are at least two types of "optimization": speeding up the program and reducing the size (memory footprint) of the program. Inlining generally speeds things up. It gets rid of the function call overhead, avoiding pushing then pulling parameters from the stack. However, it also makes the memory footprint of the program bigger, because every function call must now be replaced with the full code of the function. To make things even more complicated, remember that the CPU stores frequently used chunks of memory in a cache on the CPU for ultra-rapid access. If you make the program's memory image big enough, your program won't be able to use the cache efficiently, and in the worst case inlining could actually slow your program down. To some extent the compiler can calculate what the trade offs are, and may be able to make better decisions than you can, just looking at the source code.

回答13:

Our computer science professor urged us to never use inline in a c++ program. When asked why, he kindly explained to use that modern compilers should detect when to use inline automatically.

So yes, the inline can be an optimization technique to be used wherever possible, but apparently this is something that is already done for you whenever it's possible to inline a function anyways.

回答14:

Conclusion from another discussion here:

Are there any drawbacks with inline functions?

Apparently, There is nothing wrong with using inline functions.

But it is worth noting the following points!

Overuse of inlining can actually make programs slower. Depending on a function's size, inlining it can cause the code size to increase or decrease. Inlining a very small accessor function will usually decrease code size while inlining a very large function can dramatically increase code size. On modern processors smaller code usually runs faster due to better use of the instruction cache. - Google Guidelines
The speed benefits of inline functions tend to diminish as the function grows in size. At some point the overhead of the function call becomes small compared to the execution of the function body, and the benefit is lost - Source
There are few situations where an inline function may not work:
- For a function returning values; if a return statement exists.
- For a function not returning any values; if a loop, switch or goto statement exists.
- If a function is recursive. -Source
The __inline keyword causes a function to be inlined only if you specify the optimize option. If optimize is specified, whether or not __inline is honored depends on the setting of the inline optimizer option. By default, the inline option is in effect whenever the optimizer is run. If you specify optimize , you must also specify the noinline option if you want the __inline keyword to be ignored. -Source

来源：https://stackoverflow.com/questions/145838/benefits-of-inline-functions-in-c

标签

c++

inline-functions