I'm trying to develop a standalone Java web service client with JAX-WS (Metro) that uses WS-Security with Username Token Authentication (Password digest, nonces and timestamp) and timestamp verification along with WS-Addressing over SSL.
The WSDL I have to work with does not define any security policy information. I have been unable to figure out exactly how to add this header information (the correct way to do so) when the WSDL does not contain this information. Most examples I have found using Metro revolve around using Netbeans to automatically generate this from the WSDL which does not help me at all. I have looked into WSIT, XWSS, etc. without much clarity or direction. JBoss WS Metro looked promising not much luck yet there either.
Anyone have experience doing this or have suggestions on how to accomplish this task? Even pointing me in the right direction would be helpful. I am not restricted to a specific technology other than it must be Java based.
I did end up figuring this issue out but I went in another direction to do so. My solution was to use CXF 2.1 and its JAX-WS implementation, combining the power of CXF with the existing Spring infrastructure I already had in place. I was skeptical at first because of the numerous jars required by CXF, but in the end it provided the best and simplest solution.
Adapting an example from the CXF website for client configuration, I used the custom CXF JAXWS namespace within spring and used an Out Interceptor for Username Token Authentication (Password digest, nonces and timestamp) and timestamp verification. The only other step to make this work was creating my own Password Callback handler that is executed for each outbound SOAP request.
For SSL configuration, I again turned to CXF and its SSL support via conduits, although I could never make SSL work with a specific http:conduit name, I had to use the general purpose one that is not recommended for production environments.
Below is an example of my config file.
Spring config file
<beans xmlns="http://www.springframework.org/schema/beans"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:jaxws="http://cxf.apache.org/jaxws"
xmlns:sec="http://cxf.apache.org/configuration/security"
xmlns:http="http://cxf.apache.org/transports/http/configuration"
xmlns:context="http://www.springframework.org/schema/context"
xmlns:cxf="http://cxf.apache.org/core"
xsi:schemaLocation="http://www.springframework.org/schema/beans
http://www.springframework.org/schema/beans/spring-beans-2.5.xsd
http://cxf.apache.org/configuration/security http://cxf.apache.org/schemas/configuration/security.xsd
http://cxf.apache.org/transports/http/configuration http://cxf.apache.org/schemas/configuration/http-conf.xsd
http://www.springframework.org/schema/context http://www.springframework.org/schema/context/spring-context-2.5.xsd
http://cxf.apache.org/jaxws http://cxf.apache.org/schemas/jaxws.xsd
http://cxf.apache.org/core http://cxf.apache.org/schemas/core.xsd">
<context:property-placeholder location="meta/my.properties" />
<context:component-scan base-package="com.foo" />
<import resource="remoting.xml" />
<jaxws:client id="myWebService" address="${my.endpointAddress}"
serviceClass="com.foo.my.ServicePortType">
<!-- Testing only, adds logging of entire message in and out -->
<jaxws:outInterceptors>
<ref bean="TimestampUsernameToken_Request" />
<ref bean="logOutbound" />
</jaxws:outInterceptors>
<jaxws:inInterceptors>
<ref bean="logInbound" />
</jaxws:inInterceptors>
<jaxws:inFaultInterceptors>
<ref bean="logOutbound" />
</jaxws:inFaultInterceptors>
<!-- Production settings -->
<!--
<jaxws:outInterceptors> <ref bean="TimestampUsernameToken_Request" />
</jaxws:outInterceptors>
-->
</jaxws:client >
<!--
CXF Interceptors for Inbound and Outbound messages
Used for logging and adding Username token / Timestamp Security Header to SOAP message
-->
<bean id="logInbound" class="org.apache.cxf.interceptor.LoggingInInterceptor" />
<bean id="logOutbound" class="org.apache.cxf.interceptor.LoggingOutInterceptor" />
<bean id="TimestampUsernameToken_Request" class="org.apache.cxf.ws.security.wss4j.WSS4JOutInterceptor">
<constructor-arg>
<map>
<entry key="action" value="UsernameToken Timestamp" />
<entry key="user" value="${my.group}.${my.userId}" />
<entry key="passwordType" value="PasswordDigest" />
<entry key="passwordCallbackClass" value="com.foo.my.ClientPasswordHandler" />
</map>
</constructor-arg>
</bean>
<!--
http:conduit namespace is used to configure SSL using keystores, etc
*.http-conduit works but CXF says its only supposed to be for temporary use (not production),
well until the correct way works, we're going to use it.
-->
<http:conduit name="*.http-conduit">
<http:tlsClientParameters
secureSocketProtocol="SSL">
<!--
<sec:trustManagers>
<sec:keyStore type="JKS"
password="${my.truststore.password}"
file="${my.truststore.file}" />
</sec:trustManagers>
-->
<sec:keyManagers keyPassword="${my.keystore.password}">
<sec:keyStore type="JKS"
password="${my.keystore.password}"
file="${my.keystore.file}" />
</sec:keyManagers>
<!-- Cipher suites filters specify the cipher suite to allow/disallow in SSL communcation -->
<sec:cipherSuitesFilter>
<sec:include>.*_WITH_3DES_.*</sec:include>
<sec:include>.*_EXPORT_.*</sec:include>
<sec:include>.*_EXPORT1024_.*</sec:include
<sec:include>.*_WITH_DES_.*</sec:include
<sec:exclude>.*_WITH_NULL_.*</sec:exclude
<sec:exclude>.*_DH_anon_.*</sec:exclude>
</sec:cipherSuitesFilter>
</http:tlsClientParameters>
</http:conduit>
</beans>
Java Client Password Handler:
import java.io.IOException;
import javax.security.auth.callback.Callback;
import javax.security.auth.callback.CallbackHandler;
import javax.security.auth.callback.UnsupportedCallbackException;
import org.apache.log4j.Logger;
import org.apache.ws.security.WSPasswordCallback;
/**
* <p>
* Provides a callback handler for use processing outbound/inbound SOAP messages.
* ClientPasswordHandler sets the password used in the WS-Security UsernameToken
* SOAP header.
*
* </p>
*
* Created: Apr 1, 2009
* @author Jared Knipp
*
*/
public final class ClientPasswordHandler implements CallbackHandler {
protected static Logger log = Logger.getLogger(ClientPasswordHandler.class);
private static final PropertyManager PROPS = PropertyManager.getInstance();
private static String PASSWORD = PROPS.getPassword();
private static boolean IS_PASSWORD_CLEAR = PROPS.getIsClearPassword();
/**
* Client password handler call back. This method is used to provide
* additional outbound (or could be inbound also) message processing.
*
* Here the method sets the password used in the UsernameToken SOAP security header
* element in the SOAP header of the outbound message. For our purposes the clear
* text password is SHA1 hashed first before it is hashed again along with the nonce and
* current timestamp in the security header.
*/
public void handle(Callback[] callbacks) throws IOException, UnsupportedCallbackException {
if(log.isDebugEnabled()) { log.debug("Setting password for UsernameToken"); }
WSPasswordCallback pc = (WSPasswordCallback) callbacks[0];
// Check to see if the password is already Hashed via SHA1, if not then hash it first
if(IS_PASSWORD_CLEAR) {
synchronized(this) {
PASSWORD = PasswordDigestUtil.doPasswordDigest(PASSWORD);
IS_PASSWORD_CLEAR = false;
PROPS.setIsClearPassword(IS_PASSWORD_CLEAR);
PROPS.setPassword(PASSWORD);
PROPS.saveProperties();
}
}
pc.setPassword(PASSWORD);
}
}
If the information isn't in the WSDL, are you sure it's in the service described by the WSDL? The WSDL is meant to provide all the information necessary to describe the service, including the security policies necessary to use the service.
What platform did the WSDL come from? Is it possible that the WSDL is not the complete description? For instance, it might be a WSDL that is included in another WSDL that does provide the security information.
There is a post here explaining how to configure a Client and a Server in CXF with WS-Security: JAX-WS Web Services with Spring and CXF
来源：https://stackoverflow.com/questions/699254/jax-ws-consuming-web-service-with-ws-security-and-ws-addressing