问题
I am trying to solve the equation
x1 + x2 + x3 + .... + xn = 1
where the values of all xi
are restricted to [0, 0.1, 0.2, ..., 0.9, 1]
.
Currently, I am solving the problem by first generating an n-dimensional array mat
, where at each element location the value is the sum of the axis values, which vary in axisValues = 0:0.1:1
:
mat(i,j,k,...,q) = axisValues(i) + axisValues(j) + ... + axisValues(q).
Then I search for all entries of the resulting array that are equal to one. The code (shown below for further clarification) is working fine and has been tested for up to 5 dimensions. The problem is, that the run time increases exponentially and I need the script to work for more than a few dimensions.
clear all
dim = 2; % The dimension of the matrix is defined here. The script has been tested for dim ≤ 5
fractiles(:,1) = [0:0.1:1]; % Produces a vector containing the initial axis elements, which will be used to calculate the matrix elements
fractiles = repmat(fractiles,1,dim); % multiplies the vector to supply dim rows with the axis elements 0:0.1:1. These elements will be changed later, but the symmetry will remain the same.
dim_len = repmat(size(fractiles,1),1,size(fractiles,2)); % Here, the length of the dimensions is checked, which his needed to initialize the matrix mat, which will be filled with the axis element sums
mat = zeros(dim_len); % Here the matrix mat is initialized
Sub=cell(1,dim);
mat_size = size(mat);
% The following for loop fills each matrix elements of the dim dimensional matrix mat with the sum of the corresponding dim axis elements.
for ind=1:numel(mat)
[Sub{:}]=ind2sub(mat_size,ind);
SubMatrix=cell2mat(Sub);
sum_indices = 0;
for j = 1:dim
sum_indices = sum_indices+fractiles(SubMatrix(j),j);
end
mat(ind) = sum_indices;
end
Ind_ones = find(mat==1); % Finally, the matrix elements equal to one are found.
I have the feeling that the following idea using the symmetry of the problem might help to significantly reduce calculation time:
For a 2D matrix, all entries that fulfill the condition above lie on the diagonal from mat(1,11)
to mat(11,1)
, i.e. from the maximal value of x1
to the maximal value of x2
.
For a 3D Matrix, all entries fulfill the condition that lie on a diagonal plane through mat(1,1,11)
, mat(1,11,1)
, mat(11,1,1)
, i.e. from the maximal value of x1
and x2
to the maximal value of x3
.
The same is true for higher dimensions: All matrix elements of interest lie on an n-1
dimensional hyper-plane fixed on the highest axis value in each dimension.
The question is: Is there a way to directly determine the indices of the elements on these n-1
dimensional hyper-plane? If so, the whole problem could be solved in one step and without needing to calculate all entries of the n-dimensional matrix and then searching for the entries of interest.
回答1:
Math:
Instead of going the hypercube-way, we solve the equation
x(1) + x(2) + ... + x(n) = 1
where each x(i)
can vary in [0, 1/k, 2/k, ... (k-1)/k, 1]
instead. In your case k
will be 10, as this will then result in the percentages [0, 10, 20, ... 90, 100]
.
Multiplied by k
this corresponds to the diophantine equation
x(1) + x(2) + ... + x(n) = k,
where all the x(i)
vary in [0, 1, 2, ... k-1, k]
.
We can build a bijection between this and the combinatorial concept of combinations with repetition.
The wikipedia article even implicitly mentions the underlying bijection by the statement:
The number of multisubsets of size k is then the number of nonnegative integer solutions of the Diophantine equation
x1 + x2 + ... + xn = k
.
For a smaller example, say we are going with k=3
and percentages in [0, 33, 66, 100]
instead. Given all k-multicombinations of the set {1,2,3}
:
RepCombs =
1 1 1
1 1 2
1 1 3
1 2 2
1 2 3
1 3 3
2 2 2
2 2 3
2 3 3
3 3 3
Then we map these to your percentages using the following rule:
For every row i
, if the entry is j
, then add 1/3
of the percentage to the corresponding Matrix entry M(i,j)
. The first row will correspond to [1/3 + 1/3 + 1/3, 0, 0] = [1,0,0]
.
The overall matrix generated by this process will look like this:
M =
1.0000 0 0
0.6667 0.3333 0
0.6667 0 0.3333
0.3333 0.6667 0
0.3333 0.3333 0.3333
0.3333 0 0.6667
0 1.0000 0
0 0.6667 0.3333
0 0.3333 0.6667
0 0 1.0000
Code:
And now for the MATLAB code that generates all this:
I use the function nmultichoosek
from this answer and accumarray
to accomplish our goal:
function M = possibleMixturesOfNSubstances(N, percentageSteps)
RepCombs = nmultichoosek(1:N, percentageSteps);
numCombs = size(RepCombs,1);
M = accumarray([repmat((1:numCombs).', percentageSteps, 1), RepCombs(:)], 1/percentageSteps, [numCombs, N]);
If you want percentages in [0, 10, ... 90, 100]
and have 4 substances, call this function using possibleMixturesOfNSubstances(4,10)
来源:https://stackoverflow.com/questions/28507040/finding-all-combinations-of-multiple-variables-summing-to-1