Best way to install R on Ubuntu 20.04?

此生再无相见时 提交于 2020-12-31 08:33:49

问题


Does anyone have a good approach to installing R on Ubuntu 20.04? I can't seem to find a solution for this specific to 20.04 focal through apt.

No LSB modules are available.
Distributor ID: Ubuntu
Description:    Ubuntu 20.04 LTS
Release:    20.04
Codename:   focal

Edit: after going through the link here and adding the entry to sources.list, I ran into issues with dependencies:

Reading package lists... Done
Building dependency tree       
Reading state information... Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:

The following packages have unmet dependencies:
 r-base : Depends: r-base-core (>= 4.0.2-1.2004.0) but it is not going to be installed
          Depends: r-recommended (= 4.0.2-1.2004.0) but it is not going to be installed
          Recommends: r-base-html but it is not going to be installed
E: Unable to correct problems, you have held broken packages.

Per @DirkEddelbuettel's comment, I ran sudo apt install r-base-core r-recommended r-base-html to see next level dependencies:

Reading package lists... Done
Building dependency tree       
Reading state information... Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:

The following packages have unmet dependencies:
 r-base-core : Depends: libblas3 but it is not installable or
                        libblas.so.3 but it is not installable
               Depends: liblapack3 but it is not installable or
                        liblapack.so.3 but it is not installable
               Depends: libtcl8.6 (>= 8.6.0) but it is not installable
               Depends: libtk8.6 (>= 8.6.0) but it is not installable
               Recommends: r-base-dev but it is not going to be installed
               Recommends: r-doc-html but it is not going to be installed
 r-recommended : Depends: r-cran-kernsmooth (>= 2.2.14) but it is not going to be installed
                 Depends: r-cran-mgcv (>= 1.1.5) but it is not going to be installed
                 Depends: r-cran-rpart (>= 3.1.20) but it is not going to be installed
                 Depends: r-cran-survival (>= 2.13.2-1) but it is not going to be installed
                 Depends: r-cran-matrix but it is not going to be installed
E: Unable to correct problems, you have held broken packages.

There was a more underlying issue when I worked on trying to install r-base. I ended up finding out that I had problems with unmet dependencies after adding a PPA. I used this link here to fix the underlying problem of unmet dependencies, which in turn allowed me to apt install and not have any issues installing.


回答1:


Here is what I do in the Rocker container r-ubuntu for the 20.04 image:

  1. Install software-properties-common to be able to say add-apt-repository

  2. Add the rrutter4.0 PPA for R itself (same as CRAN)
    add-apt-repository --enable-source --yes "ppa:marutter/rrutter4.0"

  3. Add the c4d4u.teams repo for over 4k CRAN packages:
    add-apt-repository --enable-source --yes "ppa:c2d4u.team/c2d4u4.0+"

  4. Run apt install r-base (and a few more).

In a narrow sense you only need 2 (as you likely do not 1 on a full Ubuntu system) and 4 but you may as well do 3.

You can of course also just to docker pull rocker/r-ubuntu:20.04 and get that container pre-made, but I use both: a container for tests, and these settings on my 20.04 machine(s).



来源:https://stackoverflow.com/questions/62597054/best-way-to-install-r-on-ubuntu-20-04

标签
易学教程内所有资源均来自网络或用户发布的内容,如有违反法律规定的内容欢迎反馈
该文章没有解决你所遇到的问题?点击提问,说说你的问题,让更多的人一起探讨吧!