问题
I've been having a lot of trouble recently compiling ffmpeg on windows. I'm currently using the cgywin terminal to run the code. I've tried following many of the most popular tutorials on the web but I can't seem to get it to work. I'm currently using this tutorial as a guide http://www.roman10.net/how-to-build-ffmpeg-for-android/
Where I'm at:
I've created a bash script
#!/bin/bash
NDK=C:/Users/jrblain/Development/adt-bundle-windows-x86_64-20130514/android-ndk-r9
PLATFORM=$NDK/platforms/android-8/arch-arm/
PREBUILT=$NDK/toolchains/arm-linux-androideabi-4.6/prebuilt/windows-x86_64
function build_one
{
./configure --target-os=linux \
--prefix=$PREFIX \
--enable-cross-compile \
--extra-libs="-lgcc" \
--arch=arm \
--cc=$PREBUILT/bin/arm-linux-androideabi-gcc \
--cross-prefix=$PREBUILT/bin/arm-linux-androideabi- \
--nm=$PREBUILT/bin/arm-linux-androideabi-nm \
--sysroot=$PLATFORM \
--extra-cflags=" -O3 -fpic -DANDROID -DHAVE_SYS_UIO_H=1 -Dipv6mr_interface=ipv6mr_ifindex -fasm -Wno-psabi -fno-short-enums -fno-strict-aliasing -finline-limit=300 $OPTIMIZE_CFLAGS " \
--disable-shared \
--enable-static \
--extra-ldflags="-Wl,-rpath-link=$PLATFORM/usr/lib -L$PLATFORM/usr/lib -nostdlib -lc -lm -ldl -llog" \
--disable-everything \
--enable-demuxer=mov \
--enable-demuxer=h264 \
--disable-ffplay \
--enable-protocol=file \
--enable-avformat \
--enable-avcodec \
--enable-decoder=rawvideo \
--enable-decoder=mjpeg \
--enable-decoder=h263 \
--enable-decoder=mpeg4 \
--enable-decoder=h264 \
--enable-parser=h264 \
--disable-network \
--enable-zlib \
--disable-avfilter \
--disable-avdevice \
$ADDITIONAL_CONFIGURE_FLAG
make clean
make -j4 install
$PREBUILT/bin/arm-linux-androideabi-ar d libavcodec/libavcodec.a inverse.o
$PREBUILT/bin/arm-linux-androideabi-ld -rpath-link=$PLATFORM/usr/lib -L$PLATFORM/usr/lib -soname libffmpeg.so -shared -nostdlib -z,noexecstack -Bsymbolic --whole-archive --no-undefined -o $PREFIX/libffmpeg.so libavcodec/libavcodec.a libavformat/libavformat.a libavutil/libavutil.a libswscale/libswscale.a -lc -lm -lz -ldl -llog --warn-once --dynamic-linker=/system/bin/linker $PREBUILT/lib/gcc/arm-linux-androideabi/4.4.3/libgcc.a
}
#arm v6
#CPU=armv6
#OPTIMIZE_CFLAGS="-marm -march=$CPU"
#PREFIX=./android/$CPU
#ADDITIONAL_CONFIGURE_FLAG=
#build_one
#arm v7vfpv3
CPU=armv7-a
OPTIMIZE_CFLAGS="-mfloat-abi=softfp -mfpu=vfpv3-d16 -marm -march=$CPU "
PREFIX=./android/$CPU
ADDITIONAL_CONFIGURE_FLAG=
build_one
#arm v7vfp
#CPU=armv7-a
#OPTIMIZE_CFLAGS="-mfloat-abi=softfp -mfpu=vfp -marm -march=$CPU "
#PREFIX=./android/$CPU-vfp
#ADDITIONAL_CONFIGURE_FLAG=
#build_one
#arm v7n
#CPU=armv7-a
#OPTIMIZE_CFLAGS="-mfloat-abi=softfp -mfpu=neon -marm -march=$CPU -mtune=cortex-a8"
#PREFIX=./android/$CPU
#ADDITIONAL_CONFIGURE_FLAG=--enable-neon
#build_one
#arm v6+vfp
#CPU=armv6
#OPTIMIZE_CFLAGS="-DCMP_HAVE_VFP -mfloat-abi=softfp -mfpu=vfp -marm -march=$CPU"
#PREFIX=./android/${CPU}_vfp
#ADDITIONAL_CONFIGURE_FLAG=
#build_one
I then followed steps 4-6 of this post Does anyone find this useful? - Compiling FFMPEG on Windows with Cywin and NDK r5 which consists of
4 - Open the file 'configure' in the root of the FFMPEG directory in a text editor.
5 - Comment out lines 2073, 2074 and 2075.
6 - Below 2075, add the following line:
TMPDIR=c:/cygwin/tmp
When I ran the script in cgywin I got this result:
install prefix ./android/armv7-a
source path .
C compiler C:/Users/jrblain/Development/adt-bundle-windows-x86_64-20130514/android-ndk-r9/toolchains/arm-linux-androideabi-4.6/prebuilt/windows-x86_64/bin/arm-linux-androideabi-gcc
ARCH arm (armv7-a)
big-endian no
runtime cpu detection yes
ARMv5TE enabled yes
ARMv6 enabled yes
ARMv6T2 enabled yes
VFP enabled yes
NEON enabled yes
THUMB enabled no
debug symbols yes
strip symbols yes
optimize for size no
optimizations yes
static yes
shared no
postprocessing support no
new filter support no
network support no
threading support pthreads
safe bitstream reader yes
SDL support no
opencl enabled no
texi2html enabled no
perl enabled no
pod2man enabled no
makeinfo enabled no
External libraries:
zlib
Enabled decoders:
h263 mjpeg rawvideo
h264 mpeg4
Enabled encoders:
Enabled hwaccels:
Enabled parsers:
h263 h264 mpeg4video
Enabled demuxers:
h264 mov
Enabled muxers:
Enabled protocols:
file
Enabled filters:
Enabled bsfs:
Enabled indevs:
Enabled outdevs:
License: LGPL version 2.1 or later
Creating config.mak, config.h, and doc/config.texi...
libavutil/avconfig.h is unchanged
WARNING: C:/Users/jrblain/Development/adt-bundle-windows-x86_64-20130514/android-ndk-r9/toolchains/arm-linux-androideabi-4.6/prebuilt/windows-x86_64/bin/arm-linux-androideabi-pkg-config not found, library detection may fail.
library.mak:105: *** missing separator. Stop.
library.mak:105: *** missing separator. Stop.
C:\Users\jrblain\Development\adt-bundle-windows-x86_64-20130514\android-ndk-r9\toolchains\arm-linux-androideabi-4.6\prebuilt\windows-x86_64\bin\arm-linux-androideabi-ld.exe: ,noexecstack: unknown -z option
C:\Users\jrblain\Development\adt-bundle-windows-x86_64-20130514\android-ndk-r9\toolchains\arm-linux-androideabi-4.6\prebuilt\windows-x86_64\bin\arm-linux-androideabi-ld.exe: use the --help option for usage information
After this script runs I get some new files within my ffmpeg folder. They are .config, config(header), config.mak , config.fate. The android folder is never created like it is supposed to. I'm also not sure where the library.mak error is coming from considering that it came with ffmpeg download.
I'm not sure where this i'm going wrong in all of this. I feel like the fact that I'm using windows will make this build process different.
回答1:
The first error say "WARNING: C:/.../arm-linux-androideabi-pkg-config not found, library detection may fail." So I suggest to fix the path.
'C:/' is not a POSIX path. Cygwin programs are able to translate it (with a warning).
cd 'c:' # works. cd is a built-in command
ls 'c:' # doesn't work
ls 'c:/' # works (edited)
The documentation about how the Cygwin maps POSIX- and Win32-style paths.
From my experience you have issue when you mix slashs and back-slashs or when you call Windows native command from Cygwin. Example:
javac -cp "$(cygpath -pw "$CLASSPATH")" hello.java
In my opinion, you should hardcode a POSIX path, or use the following command:
cygpath -u 'c:' # the relevant command provided by Cygwin
(cd 'c:' && pwd) # a tip, useful if you want a portable syntax
But maybe I am complety wrong. I suppose you already check the path
ls 'C:/Users/jrblain/Development/adt-bundle-windows-x86_64-20130514/android-ndk-r9/toolchains/arm-linux-androideabi-4.6/prebuilt/windows-x86_64/bin/arm-linux-androideabi-pkg-config'
And I supppose you already check the line 105 of your mk file (tabulation and linux line feed).
来源：https://stackoverflow.com/questions/18190605/problems-compiling-ffmpeg-on-windows-using-cygwin