SVN two factor authentication

问题

I need to implement a solution to secure SVN access using two factor authentication. Ideally I'd like to use Google Authenticator along with Basic auth. How would I proceed with implementing such a solution?

I'm considering developing a web proxy page that must first be authenticated to through a browser and once authenticated, follow on SVN commands would pass through. Does this seem feasible or is there a better solution?

Thanks!

回答1:

These directions will work for Ubuntu 12.04. I should note that these directions were pulled from several different sources across the web. There was no definitive guide for getting this setup.

First, install updates and C/C++ compiler if it doesn't exist already:

$ sudo apt-get update
$ sudo apt-get upgrade
$ sudo apt-get install build-essential

Install Subversion and Apache:

$ sudo apt-get install subversion
$ sudo apt-get install libapache2-svn apache2

Enable SSL:

$ sudo a2enmod ssl
$ sudo vi /etc/apache2/ports.conf

In the open file change "NameVirtualHost *" to "NameVirtualHost *:443"

Generate Certificate:

$ sudo apt-get install ssl-cert
$ sudo mkdir /etc/apache2/ssl
$ sudo /usr/sbin/make-ssl-cert /usr/share/ssl-cert/ssleay.cnf /etc/apache2/ssl/apache.pem

Accept the localhost value for the cert by hitting enter

Create Virtual Host:

$ sudo cp /etc/apache2/sites-available/default /etc/apache2/sites-available/svnserver
$ sudo vim /etc/apache2/sites-available/svnserver

In the open file change VirtualHost * to VirtualHost *:443

Add the following below the ServerAdmin tag in the opened file and then save and close:

SSLEngine on
SSLCertificateFile /etc/apache2/ssl/apache.pem
SSLProtocol all
SSLCipherSuite HIGH:MEDIUM

Enable the site:

$ sudo a2ensite svnserver
$ sudo vi /etc/apache2/apache2.conf

Add the following line to the open file, save, and close:

ServerName localhost

Restart Apache:

$ sudo /etc/init.d/apache2 restart

Adding a repository to SVN:

$ sudo mkdir /var/svn
$ REPOS=myFirstRepo
$ sudo svnadmin create /var/svn/$REPOS
$ sudo chown -R www-data:www-data /var/svn/$REPOS
$ sudo chmod -R g+ws /var/svn/$REPOS

Repeat everything but mkdir /var/svn to create additional repositories

Google Authenticator

Install PAM and download and build Google Authenticator:

$ sudo apt-get install libpam0g-dev
$ cd ~
$ sudo wget http://google-authenticator.googlecode.com/files/libpam-google-authenticator-1.0-source.tar.bz2
$ sudo tar -jxf libpam-google*
$ cd libpam-google*
$ sudo make install

Google Auth Apache Module

Download and install Google Auth Apache Module:

$ wget https://google-authenticator-apache-module.googlecode.com/files/GoogleAuthApache.src.r10.bz2
$ sudo tar -jxf GoogleAuthApache.src.r10.bz2 
$ cd google-authenticator*
$ sudo apt-get install apache2-prefork-dev
$ sudo vi Makefile

in the opened file, change line 1 to:

APXS=apxs2

then change line 7 to point to the location to install and save and close the file:

install: all
     sudo cp .libs/mod_authn_google.so /usr/lib/apache2/modules/

Replace mod_authn_google.c with the code from r21 on the project site here: https://code.google.com/p/google-authenticator-apache-module/source/detail?r=21 (this is when true two-factor auth was added)

$ sudo make install

Setup two factor auth in Apache:

$ cd /etc/apache2/
$ sudo mkdir two-factor 
$ sudo vi httpd.conf

Add the following line the opened file, save, and close:

Loadmodule authn_google_module /usr/lib/apache2/modules/mod_authn_google.so

$ sudo vi ports.conf

In the open file change to

$ cd /etc/apache2/mods-available
$ sudo vi dav_svn.conf

In the open file add the text below, save, and close:

<Location /svn>
    DAV svn 
    SVNParentPath /var/svn
    AuthType Basic
    AuthName "Google Authenticator Code"
    AuthBasicProvider "google_authenticator"
    Require valid-user
    GoogleAuthUserPath /etc/apache2/two-factor/
    GoogleAuthCookieLife 3600
    GoogleAuthEntryWindow 2
    SSLRequireSSL
</Location>

Restart Apache:

$ sudo /etc/init.d/apache2 restart

At this point SVN, Apache, and Google Authenticator are configured. Now users can be added.

Adding Users

First, users need to be added as a system user so they show up appropriately in the Google Auth client

$ sudo adduser firstName.lastName --force-badname
$ sudo su - firstName.LastName
# google-authenticator

Google Authenticator will ask several questions. These should be reviewed based on the environment this is being deployed to.

Copy the URL that is printed after answering the first question - this is the URL for the QR code and used to add the key to your Google Auth client

# exit
$ cd /etc/apache2/two-factor
$ sudo cp /home/firstName.lastName/.google_authenticator firstName.lastName
$ sudo chown -R :www-data /etc/apache2/two-factor/  
$ sudo chmod g+r firstName.lastName
$ sudo vi firstName.lastName

Modify the opened file to include a line similar to the below line, save, and close:

" PASSWORD=myTestPassword

Everything should now be configured. To login, browse to the URL and use the username, and password + 6 character Google Authenticator code.

来源：https://stackoverflow.com/questions/19696526/svn-two-factor-authentication

标签

svn

two-factor-authentication