问题
I am playing with a toy example to understand PCA vs keras autoencoder
I have the following code for understanding PCA:
import numpy as np
import matplotlib.pyplot as plt
from mpl_toolkits.mplot3d import Axes3D
from sklearn import decomposition
from sklearn import datasets
iris = datasets.load_iris()
X = iris.data
pca = decomposition.PCA(n_components=3)
pca.fit(X)
pca.explained_variance_ratio_
array([ 0.92461621, 0.05301557, 0.01718514])
pca.components_
array([[ 0.36158968, -0.08226889, 0.85657211, 0.35884393],
[ 0.65653988, 0.72971237, -0.1757674 , -0.07470647],
[-0.58099728, 0.59641809, 0.07252408, 0.54906091]])
I have done a few readings and play codes with keras including this one.
However, the reference code feels too high a leap for my level of understanding.
Does someone have a short auto-encoder code which can show me
(1) how to pull the first 3 components from auto-encoder
(2) how to understand what amount of variance the auto-encoder captures
(3) how the auto-encoder components compare against PCA components
回答1:
First of all, the aim of an autoencoder is to learn a representation (encoding) for a set of data, typically for the purpose of dimensionality reduction. So, the target output of the autoencoder is the autoencoder input itself.
It is shown in [1] that If there is one linear hidden layer and the mean squared error criterion is used to train the network, then the k hidden units learn to project the input in the span of the first k principal components of the data.
And in [2] you can see that If the hidden layer is nonlinear, the autoencoder behaves differently from PCA, with the ability to capture multi-modal aspects of the input distribution.
Autoencoders are data-specific, which means that they will only be able to compress data similar to what they have been trained on. So, the usefulness of features that have been learned by hidden layers could be used for evaluating the efficacy of the method.
For this reason, one way to evaluate an autoencoder efficacy in dimensionality reduction is cutting the output of the middle hidden layer and compare the accuracy/performance of your desired algorithm by this reduced data rather than using original data. Generally, PCA is a linear method, while autoencoders are usually non-linear. Mathematically, it is hard to compare them together, but intuitively I provide an example of dimensionality reduction on MNIST dataset using Autoencoder for your better understanding. The code is here:
from keras.datasets import mnist
from keras.models import Model
from keras.layers import Input, Dense
from keras.utils import np_utils
import numpy as np
num_train = 60000
num_test = 10000
height, width, depth = 28, 28, 1 # MNIST images are 28x28
num_classes = 10 # there are 10 classes (1 per digit)
(X_train, y_train), (X_test, y_test) = mnist.load_data()
X_train = X_train.reshape(num_train, height * width)
X_test = X_test.reshape(num_test, height * width)
X_train = X_train.astype('float32')
X_test = X_test.astype('float32')
X_train /= 255 # Normalise data to [0, 1] range
X_test /= 255 # Normalise data to [0, 1] range
Y_train = np_utils.to_categorical(y_train, num_classes) # One-hot encode the labels
Y_test = np_utils.to_categorical(y_test, num_classes) # One-hot encode the labels
input_img = Input(shape=(height * width,))
x = Dense(height * width, activation='relu')(input_img)
encoded = Dense(height * width//2, activation='relu')(x)
encoded = Dense(height * width//8, activation='relu')(encoded)
y = Dense(height * width//256, activation='relu')(x)
decoded = Dense(height * width//8, activation='relu')(y)
decoded = Dense(height * width//2, activation='relu')(decoded)
z = Dense(height * width, activation='sigmoid')(decoded)
model = Model(input_img, z)
model.compile(optimizer='adadelta', loss='mse') # reporting the accuracy
model.fit(X_train, X_train,
epochs=10,
batch_size=128,
shuffle=True,
validation_data=(X_test, X_test))
mid = Model(input_img, y)
reduced_representation =mid.predict(X_test)
out = Dense(num_classes, activation='softmax')(y)
reduced = Model(input_img, out)
reduced.compile(loss='categorical_crossentropy',
optimizer='adam',
metrics=['accuracy'])
reduced.fit(X_train, Y_train,
epochs=10,
batch_size=128,
shuffle=True,
validation_data=(X_test, Y_test))
scores = reduced.evaluate(X_test, Y_test, verbose=1)
print("Accuracy: ", scores[1])
It produces a $y\in \mathbb{R}^{3}$ ( almost like what you get by decomposition.PCA(n_components=3) ). For example, here you see the outputs of layer y for a digit 5 instance in dataset:
class y_1 y_2 y_3
5 87.38 0.00 20.79
As you see in the above code, when we connect layer y to a softmax dense layer:
mid = Model(input_img, y)
reduced_representation =mid.predict(X_test)
the new model mid give us a good classification accuracy about 95%. So, it would be reasonable to say that y, is an efficiently extracted feature vector for the dataset.
References:
[1]: Bourlard, Hervé, and Yves Kamp. "Auto-association by multilayer perceptrons and singular value decomposition." Biological cybernetics 59.4 (1988): 291-294.
[2]: Japkowicz, Nathalie, Stephen Jose Hanson, and Mark A. Gluck. "Nonlinear autoassociation is not equivalent to PCA." Neural computation 12.3 (2000): 531-545.
回答2:
The earlier answer cover the whole thing, however I am doing the analysis on the Iris data - my code comes with a slightly modificiation from this post which dives further into the topic. As it was request, lets load the data
from sklearn.datasets import load_iris
from sklearn.preprocessing import MinMaxScaler
iris = load_iris()
X = iris.data
y = iris.target
target_names = iris.target_names
scaler = MinMaxScaler()
scaler.fit(X)
X_scaled = scaler.transform(X)
Let's do a regular PCA
from sklearn import decomposition
pca = decomposition.PCA()
pca_transformed = pca.fit_transform(X_scaled)
plot3clusters(pca_transformed[:,:2], 'PCA', 'PC')
A very simple AE model with linear layers, as the earlier answer pointed out with ... the first reference, one linear hidden layer and the mean squared error criterion is used to train the network, then the k hidden units learn to project the input in the span of the first k principal components of the data.
from keras.layers import Input, Dense
from keras.models import Model
import matplotlib.pyplot as plt
#create an AE and fit it with our data using 3 neurons in the dense layer using keras' functional API
input_dim = X_scaled.shape[1]
encoding_dim = 2
input_img = Input(shape=(input_dim,))
encoded = Dense(encoding_dim, activation='linear')(input_img)
decoded = Dense(input_dim, activation='linear')(encoded)
autoencoder = Model(input_img, decoded)
autoencoder.compile(optimizer='adam', loss='mse')
print(autoencoder.summary())
history = autoencoder.fit(X_scaled, X_scaled,
epochs=1000,
batch_size=16,
shuffle=True,
validation_split=0.1,
verbose = 0)
# use our encoded layer to encode the training input
encoder = Model(input_img, encoded)
encoded_input = Input(shape=(encoding_dim,))
decoder_layer = autoencoder.layers[-1]
decoder = Model(encoded_input, decoder_layer(encoded_input))
encoded_data = encoder.predict(X_scaled)
plot3clusters(encoded_data[:,:2], 'Linear AE', 'AE')
You can look into the loss if you want
#plot our loss
plt.plot(history.history['loss'])
plt.plot(history.history['val_loss'])
plt.title('model train vs validation loss')
plt.ylabel('loss')
plt.xlabel('epoch')
plt.legend(['train', 'validation'], loc='upper right')
plt.show()
The function to plot the data
def plot3clusters(X, title, vtitle):
import matplotlib.pyplot as plt
plt.figure()
colors = ['navy', 'turquoise', 'darkorange']
lw = 2
for color, i, target_name in zip(colors, [0, 1, 2], target_names):
plt.scatter(X[y == i, 0], X[y == i, 1], color=color, alpha=1., lw=lw, label=target_name)
plt.legend(loc='best', shadow=False, scatterpoints=1)
plt.title(title)
plt.xlabel(vtitle + "1")
plt.ylabel(vtitle + "2")
return(plt.show())
Regarding explaining the variability, using non-linear hidden function, leads to other approximation similar to ICA / TSNE and others. Where the idea of variance explanation is not there, still one can look into the convergence.
来源：https://stackoverflow.com/questions/45722259/keras-autoencoder-vs-pca