问题
I'm trying to make a decent Java program that generates the primes from 1 to N (mainly for Project Euler problems).
At the moment, my algorithm is as follows:
Initialise an array of booleans (or a bitarray if N is sufficiently large) so they're all false, and an array of ints to store the primes found.
Set an integer, s equal to the lowest prime, (ie 2)
While s is <= sqrt(N)
Set all multiples of s (starting at s^2) to true in the array/bitarray.
Find the next smallest index in the array/bitarray which is false, use that as the new value of s.
Endwhile.
Go through the array/bitarray, and for every value that is false, put the corresponding index in the primes array.
Now, I've tried skipping over numbers not of the form 6k + 1 or 6k + 5, but that only gives me a ~2x speed up, whilst I've seen programs run orders of magnitudes faster than mine (albeit with very convoluted code), such as the one here
What can I do to improve?
Edit: Okay, here's my actual code (for N of 1E7):
int l = 10000000, n = 2, sqrt = (int) Math.sqrt(l);
boolean[] nums = new boolean[l + 1];
int[] primes = new int[664579];
while(n <= sqrt){
for(int i = 2 * n; i <= l; nums[i] = true, i += n);
for(n++; nums[n]; n++);
}
for(int i = 2, k = 0; i < nums.length; i++) if(!nums[i]) primes[k++] = i;
Runs in about 350ms on my 2.0GHz machine.
回答1:
While s is <= sqrt(N)
One mistake people often do in such algorithms is not precomputing square root.
while (s <= sqrt(N)) {
is much, much slower than
int limit = sqrt(N);
while (s <= limit) {
But generally speaking, Eiko is right in his comment. If you want people to offer low-level optimisations, you have to provide code.
update Ok, now about your code.
You may notice that number of iterations in your code is just little bigger than 'l'. (you may put counter inside first 'for' loop, it will be just 2-3 times bigger) And, obviously, complexity of your solution can't be less then O(l) (you can't have less than 'l' iterations).
What can make real difference is accessing memory effectively. Note that guy who wrote that article tries to reduce storage size not just because he's memory-greedy. Making compact arrays allows you to employ cache better and thus increase speed.
I just replaced boolean[] with int[] and achieved immediate x2 speed gain. (and 8x memory) And I didn't even try to do it efficiently.
update2
That's easy. You just replace every assignment a[i] = true with a[i/32] |= 1 << (i%32) and each read operation a[i] with (a[i/32] & (1 << (i%32))) != 0. And boolean[] a with int[] a, obviously.
From the first replacement it should be clear how it works: if f(i) is true, then there's a bit 1 in an integer number a[i/32], at position i%32 (int in Java has exactly 32 bits, as you know).
You can go further and replace i/32 with i >> 5, i%32 with i&31. You can also precompute all 1 << j for each j between 0 and 31 in array.
But sadly, I don't think in Java you could get close to C in this. Not to mention, that guy uses many other tricky optimizations and I agree that his could would've been worth a lot more if he made comments.
回答2:
Using the BitSet will use less memory. The Sieve algorithm is rather trivial, so you can simply "set" the bit positions on the BitSet, and then iterate to determine the primes.
回答3:
Did you also make the array smaller while skipping numbers not of the form 6k+1 and 6k+5? I only tested with ignoring numbers of the form 2k and that gave me ~4x speed up (440 ms -> 120 ms):
int l = 10000000, n = 1, sqrt = (int) Math.sqrt(l);
int m = l/2;
boolean[] nums = new boolean[m + 1];
int[] primes = new int[664579];
int i, k;
while (n <= sqrt) {
int x = (n<<1)+1;
for (i = n+x; i <= m; nums[i] = true, i+=x);
for (n++; nums[n]; n++);
}
primes[0] = 2;
for (i = 1, k = 1; i < nums.length; i++) {
if (!nums[i])
primes[k++] = (i<<1)+1;
}
回答4:
The following is from my Project Euler Library...Its a slight Variation of the Sieve of Eratosthenes...I'm not sure, but i think its called the Euler Sieve.
1) It uses a BitSet (so 1/8th the memory) 2) Only uses the bitset for Odd Numbers...(another 1/2th hence 1/16th)
Note: The Inner loop (for multiples) begins at "n*n" rather than "2*n" and also multiples of increment "2*n" are only crossed off....hence the speed up.
private void beginSieve(int mLimit)
{
primeList = new BitSet(mLimit>>1);
primeList.set(0,primeList.size(),true);
int sqroot = (int) Math.sqrt(mLimit);
primeList.clear(0);
for(int num = 3; num <= sqroot; num+=2)
{
if( primeList.get(num >> 1) )
{
int inc = num << 1;
for(int factor = num * num; factor < mLimit; factor += inc)
{
//if( ((factor) & 1) == 1)
//{
primeList.clear(factor >> 1);
//}
}
}
}
}
and here's the function to check if a number is prime...
public boolean isPrime(int num)
{
if( num < maxLimit)
{
if( (num & 1) == 0)
return ( num == 2);
else
return primeList.get(num>>1);
}
return false;
}
回答5:
You could do the step of "putting the corresponding index in the primes array" while you are detecting them, taking out a run through the array, but that's about all I can think of right now.
回答6:
I wrote a simple sieve implementation recently for the fun of it using BitSet (everyone says not to, but it's the best off the shelf way to store huge data efficiently). The performance seems to be pretty good to me, but I'm still working on improving it.
public class HelloWorld {
private static int LIMIT = 2140000000;//Integer.MAX_VALUE broke things.
private static BitSet marked;
public static void main(String[] args) {
long startTime = System.nanoTime();
init();
sieve();
long estimatedTime = System.nanoTime() - startTime;
System.out.println((float)estimatedTime/1000000000); //23.835363 seconds
System.out.println(marked.size()); //1070000000 ~= 127MB
}
private static void init()
{
double size = LIMIT * 0.5 - 1;
marked = new BitSet();
marked.set(0,(int)size, true);
}
private static void sieve()
{
int i = 0;
int cur = 0;
int add = 0;
int pos = 0;
while(((i<<1)+1)*((i<<1)+1) < LIMIT)
{
pos = i;
if(marked.get(pos++))
{
cur = pos;
add = (cur<<1);
pos += add*cur + cur - 1;
while(pos < marked.length() && pos > 0)
{
marked.clear(pos++);
pos += add;
}
}
i++;
}
}
private static void readPrimes()
{
int pos = 0;
while(pos < marked.length())
{
if(marked.get(pos++))
{
System.out.print((pos<<1)+1);
System.out.print("-");
}
}
}
}
With smaller LIMITs (say 10,000,000 which took 0.077479s) we get much faster results than the OP.
回答7:
I bet java's performance is terrible when dealing with bits... Algorithmically, the link you point out should be sufficient
回答8:
Have you tried googling, e.g. for "java prime numbers". I did and dug up this simple improvement:
http://www.anyexample.com/programming/java/java_prime_number_check_%28primality_test%29.xml
Surely, you can find more at google.
回答9:
Here is my code for Sieve of Erastothenes and this is actually the most efficient that I could do:
final int MAX = 1000000;
int p[]= new int[MAX];
p[0]=p[1]=1;
int prime[] = new int[MAX/10];
prime[0]=2;
void sieve()
{
int i,j,k=1;
for(i=3;i*i<=MAX;i+=2)
{
if(p[i])
continue;
for(j=i*i;j<MAX;j+=2*i)
p[j]=1;
}
for(i=3;i<MAX;i+=2)
{
if(p[i]==0)
prime[k++]=i;
}
return;
}
来源：https://stackoverflow.com/questions/3094722/improving-a-prime-sieve-algorithm