问题
Given an array with positive and negative integers, move all the odd indexed elements to the left and even indexed elements to the right.
The difficult part of the problem is to do it in-place while maintaining the order.
e.g.
7, 5, 6, 3, 8, 4, 2, 1
The output should be:
5, 3, 4, 1, 7, 6, 8, 2
If the order didn't matter, we could have been used partition() algorithm of quick sort.
How to do it in O( N )?
回答1:
- Get largest sub-array having size 3k+1
- Apply cycle leader algorithm to the parts of this sub-array, starting from positions 1, 3, 9, ... 3k-1: move element to its proper position in sub-array (even-indexed elements to the left of sub-array, odd-indexed - to the right), the replaced element should be also moved to its proper position, etc. until this procedure comes back to the starting position. This paper gives number-theoretic explanation why such selection of starting positions shuffles sub-array to the correct order.
- Process the remaining parts of the array recursively, using steps 1 and 2.
- Now we only need to join the reordered parts together. Start with the smaller sub-arrays at the end of the whole array. To exchange sub-array halves, use reverse algorithm: reverse(reverse(a), reverse(b)); or, for sub-array halves of equal size, use pair-wise swaps.
- Now all even-positioned elements are on the left. To get them on the right, as required, exchange elements i and i+N/2 for all i = 0 .. N/2-1.
Algorithm is in-place, time complexity is O(N).
Example:
0 1 2 3 4 5 6 7 8 9 10 11 (the original array)
0 1 2 3 4 5 6 7 8 9 # 10 11 (split to sub-arrays)
0 2 4 3 8 1 6 5 7 9 # 10 11 (first cycle leader iteration, starting with 1)
0 2 4 6 8 1 3 5 7 9 # 10 11 (second cycle leader iteration, starting with 3)
0 2 4 6 8 9 7 5 3 1 # 10 11(2nd half of 1st part& 1st half of 2nd part reversed)
0 2 4 6 8 10 1 3 5 7 9 11 (both halves reversed together)
Variation of this algorithm, that does not need step 5:
- On step 1, get largest sub-array having size 3k-1.
- On step 2, move even-indexed elements to the right of sub-array, odd-indexed - to the left. Use starting positions 0, 2, 8, ... 3k-1-1 for cycle-leader algorithm.
Here is different O(N log N) in-place algorithm, which does not need number-theoretic proofs:
- Reinterpret your array as a sequence of single-element 2*2 matrices, transpose these matrices.
- Reinterpret the result as a sequence of two-element 2*2 matrices and transpose them.
- Continue while matrices size is less than the array size.
- Now we only need to join the reordered parts together (exactly as in previous algorithm).
- Exchange elements of left and right halves of the array (exactly as in previous algorithm).
Example:
0 1 2 3 4 5 6 7 (the original array)
[0 2] [1 3] [4 6] [5 7] (first transposition)
[0 2] [4 6] [1 3] [5 7] (second transposition)
This problem is just a special case of the In-place matrix transposition.
回答2:
I tried to implement as Evgeny Kluev said, and here is the result:
#pragma once
#include <iterator>
#include <algorithm>
#include <type_traits>
#include <limits>
#include <deque>
#include <utility>
#include <cassert>
template< typename Iterator >
struct perfect_shuffle_permutation
{
static_assert(std::is_same< typename std::iterator_traits< Iterator >::iterator_category, std::random_access_iterator_tag >::value,
"!");
using difference_type = typename std::iterator_traits< Iterator >::difference_type;
using value_type = typename std::iterator_traits< Iterator >::value_type;
perfect_shuffle_permutation()
{
for (difference_type power3_ = 1; power3_ < std::numeric_limits< difference_type >::max() / 3; power3_ *= 3) {
powers3_.emplace_back(power3_ + 1);
}
powers3_.emplace_back(std::numeric_limits< difference_type >::max());
}
void
forward(Iterator _begin, Iterator _end) const
{
return forward(_begin, std::distance(_begin, _end));
}
void
backward(Iterator _begin, Iterator _end) const
{
return backward(_begin, std::distance(_begin, _end));
}
void
forward(Iterator _begin, difference_type const _size) const
{
assert(0 < _size);
assert(_size % 2 == 0);
difference_type const left_size_ = *(std::upper_bound(powers3_.cbegin(), powers3_.cend(), _size) - 1);
cycle_leader_forward(_begin, left_size_);
difference_type const rest_ = _size - left_size_;
if (rest_ != 0) {
Iterator middle_ = _begin + left_size_;
forward(middle_, rest_);
std::rotate(_begin + left_size_ / 2, middle_, middle_ + rest_ / 2);
}
}
void
backward(Iterator _begin, difference_type const _size) const
{
assert(0 < _size);
assert(_size % 2 == 0);
difference_type const left_size_ = *(std::upper_bound(powers3_.cbegin(), powers3_.cend(), _size) - 1);
std::rotate(_begin + left_size_ / 2, _begin + _size / 2, _begin + (_size + left_size_) / 2);
cycle_leader_backward(_begin, left_size_);
difference_type const rest_ = _size - left_size_;
if (rest_ != 0) {
Iterator middle_ = _begin + left_size_;
backward(middle_, rest_);
}
}
private :
void
cycle_leader_forward(Iterator _begin, difference_type const _size) const
{
for (difference_type leader_ = 1; leader_ != _size - 1; leader_ *= 3) {
permutation_forward permutation_(leader_, _size);
Iterator current_ = _begin + leader_;
value_type first_ = std::move(*current_);
while (++permutation_) {
assert(permutation_ < _size);
Iterator next_ = _begin + permutation_;
*current_ = std::move(*next_);
current_ = next_;
}
*current_ = std::move(first_);
}
}
void
cycle_leader_backward(Iterator _begin, difference_type const _size) const
{
for (difference_type leader_ = 1; leader_ != _size - 1; leader_ *= 3) {
permutation_backward permutation_(leader_, _size);
Iterator current_ = _begin + leader_;
value_type first_ = std::move(*current_);
while (++permutation_) {
assert(permutation_ < _size);
Iterator next_ = _begin + permutation_;
*current_ = std::move(*next_);
current_ = next_;
}
*current_ = std::move(first_);
}
}
struct permutation_forward
{
permutation_forward(difference_type const _leader, difference_type const _size)
: leader_(_leader)
, current_(_leader)
, half_size_(_size / 2)
{ ; }
bool
operator ++ ()
{
if (current_ < half_size_) {
current_ += current_;
} else {
current_ = 1 + (current_ - half_size_) * 2;
}
return (current_ != leader_);
}
operator difference_type () const
{
return current_;
}
private :
difference_type const leader_;
difference_type current_;
difference_type const half_size_;
};
struct permutation_backward
{
permutation_backward(difference_type const _leader, difference_type const _size)
: leader_(_leader)
, current_(_leader)
, half_size_(_size / 2)
{ ; }
bool
operator ++ ()
{
if ((current_ % 2) == 0) {
current_ /= 2;
} else {
current_ = (current_ - 1) / 2 + half_size_;
}
return (current_ != leader_);
}
operator difference_type () const
{
return current_;
}
private :
difference_type const leader_;
difference_type current_;
difference_type const half_size_;
};
std::deque< difference_type > powers3_;
};
回答3:
I modified the code here to get this algorithm:
void PartitionIndexParity(T arr[], size_t n)
{
using std::swap;
for (size_t shift = 0, k; shift != n; shift += k)
{
k = (size_t)pow(3, ceil(log(n - shift) / log(3)) - 1) + 1;
for (size_t i = 1; i < k; i *= 3) // cycle-leader algorithm
{
size_t j = i;
do { swap(arr[(j = j / 2 + (j % 2) * (k / 2)) + shift], arr[i + shift]); } while (j != i);
}
for (size_t b = shift / 2, m = shift, e = shift + (k - k / 2), i = m; shift != 0 && k != 0; ) // or just use std::rotate(arr, b, m, e)
{
swap(arr[b++], arr[i++]);
if (b == m && i == e) { break; }
if (b == m) { m = i; }
else if (i == e) { i = m; }
}
}
}
回答4:
Here's a Java implementation of Peiyush Jain's algorithm:
import java.util.Arrays;
public class InShuffle {
public static void main(String[] args) {
Integer[] nums = { 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12 };
inShuffle(nums);
System.out.println(Arrays.toString(nums));
}
public static <T> void inShuffle(T[] array) {
if (array == null) {
return;
}
inShuffle(array, 0, array.length - 1);
}
private static <T> void inShuffle(T[] array, int startIndex, int endIndex) {
while (endIndex - startIndex + 1 > 1) {
int size = endIndex - startIndex + 1;
int n = size / 2;
int k = (int)Math.floor(Math.log(size + 1) / Math.log(3));
int m = (int)(Math.pow(3, k) - 1) / 2;
rotateRight(array, startIndex + m, startIndex + n + m - 1, m);
for (int i = 0, cycleStartIndex = 0; i < k; ++i, cycleStartIndex = cycleStartIndex * 3 + 2) {
permuteCycle(array, startIndex, cycleStartIndex, 2 * m + 1);
}
endIndex = startIndex + 2 * n - 1;
startIndex = startIndex + 2 * m;
}
}
private static <T> void rotateRight(T[] array, int startIndex, int endIndex, int amount) {
reverse(array, startIndex, endIndex - amount);
reverse(array, endIndex - amount + 1, endIndex);
reverse(array, startIndex, endIndex);
}
private static <T> void reverse(T[] array, int startIndex, int endIndex) {
for (int leftIndex = startIndex, rightIndex = endIndex; leftIndex < rightIndex; ++leftIndex, --rightIndex) {
swap(array, leftIndex, rightIndex);
}
}
private static <T> void swap(T[] array, int index1, int index2) {
T temp = array[index1];
array[index1] = array[index2];
array[index2] = temp;
}
private static <T> void permuteCycle(T[] array, int offset, int startIndex, int mod) {
for (int i = ((2 * startIndex + 2) % mod) - 1; i != startIndex; i = ((2 * i + 2) % mod) - 1) {
swap(array, offset + i, offset + startIndex);
}
}
}
And doing an out-shuffle is as simple as:
public static <T> void outShuffle(T[] array) {
if (array == null) {
return;
}
inShuffle(array, 1, array.length - 1);
}
回答5:
public class OddToLeftEvenToRight {
private static void doIt(String input){
char[] inp = input.toCharArray();
int len = inp.length;
for(int j=1; j< len; j++)
{
for(int i=j; i<len-j; i+=2)
{
swap(inp, i, i+1);
}
}
System.out.print(inp);
}
private static void swap(char[] inp, int i, int j) {
char tmp = inp[i];
inp[i]= inp[j];
inp[j]=tmp;
}
public static void main(String[] args)
{
doIt("a1b");
}
}
This program does it in O(n^2).
来源：https://stackoverflow.com/questions/12338654/move-all-odd-positioned-element-to-left-half-and-even-positioned-to-right-half-i