gpg failed to sign the data fatal: failed to write commit object [Git 2.10.0]

I followed few articles over the pretty attributes on Git 2.10 release note. Going through which upgraded the git to 2.10.0 and made changes to global .gitconfig resulting as follows -

[filter "lfs"]
    clean = git-lfs clean %f
    smudge = git-lfs smudge %f
    required = true
[user]
    name = xyz
    email = abc.def@gmail.com
    signingkey = AAAAAAA
[core]
    excludesfile = /Users/xyz/.gitignore_global
    editor = 'subl' --wait
[difftool "sourcetree"]
    cmd = opendiff \"$LOCAL\" \"$REMOTE\"
    path = 
[mergetool "sourcetree"]
    cmd = /Applications/SourceTree.app/Contents/Resources/opendiff-w.sh \"$LOCAL\" \"$REMOTE\" -ancestor \"$BASE\" -merge \"$MERGED\"
    trustExitCode = true
[alias]
    lg = log --graph --pretty=format:'%Cred%h%Creset -%C(yellow)%d%Creset %s %Cgreen(%cr) %C(bold blue)<%an>%Creset' --abbrev-commit --date=relative
[color "diff"]
    old = red strike
    new = green italic

But now that I try to sign my commits using

git commit -a -S -m "message"

I get to see the following error -

You need a passphrase to unlock the secret key for

user: "XYZ (Digitally Signed) "

2048-bit RSA key, ID AAAAAAAA, created 2016-07-01

error: gpg failed to sign the data fatal: failed to write commit object

Note - I can still commit changes using git commit -a -m "message"

Is there a way to overcome the same? Or any change required in gpg configs to get along with the upgradation of git?

Update 1

Also seeking further usefulness, following Is there a way to "autosign" commits in Git with a GPG key?. I've already configured the key using

git config --global user.signingkey ED5CDE14(with my key) 
git config --global commit.gpgsign true

and quite obviously getting the same error anyway.

I ran into this issue with OSX.

Original answer:

It seems like a gpg update (of brew) changed to location of gpg to gpg1, you can change the binary where git looks up the gpg:

git config --global gpg.program gpg1

If you don't have gpg1: brew install gpg1.

Updated answer:

It looks like gpg1 is being deprecated/"gently nudged out of usage", so you probably should actually update to gpg2, unfortunately this involves quite a few more steps/a bit of time:

brew upgrade gnupg  # This has a make step which takes a while
brew link --overwrite gnupg
brew install pinentry-mac
echo "pinentry-program /usr/local/bin/pinentry-mac" >> ~/.gnupg/gpg-agent.conf
killall gpg-agent

The first part installs gpg2, and latter is a hack required to use it. For troubleshooting, see this answer (though that is about linux not brew), it suggests a good test:

echo "test" | gpg --clearsign  # on linux it's gpg2 but brew stays as gpg

If this test is successful (no error/output includes PGP signature), you have successfully updated to the latest gpg version.

You should now be able to use git signing again!
It's worth noting you'll need to have:

git config --global gpg.program gpg  # perhaps you had this already? On linux maybe gpg2
git config --global commit.gpgsign true  # if you want to sign every commit

Note: After you've ran a signed commit, you can verify it signed with:

git log --show-signature -1

which will include gpg info for the last commit.

If gnupg2 and gpg-agent 2.x are used, be sure to set the environment variable GPG_TTY.

export GPG_TTY=$(tty)

See GPG’s documentation about common problems.

If everything fails, use GIT_TRACE=1 to try and see what git is actually doing:

$ GIT_TRACE=1 git commit -m "Add page that always requires a logged-in user"
20:52:58.902766 git.c:328               trace: built-in: git 'commit' '-vvv' '-m' 'Add page that always requires a logged-in user'
20:52:58.918467 run-command.c:626       trace: run_command: 'gpg' '--status-fd=2' '-bsau' '23810377252EF4C2'
error: gpg failed to sign the data
fatal: failed to write commit object

Now run the failing command manually:

$ gpg -bsau 23810377252EF4C2
gpg: skipped "23810377252EF4C2": Unusable secret key
gpg: signing failed: Unusable secret key

Turns out, my key was expired, git was not to blame.

I've DONE it through this short and easy recipe:

Auto-sign commits on MacOS (Globally and with different IDEs):

Get your signingkey in this way.

brew install gnupg gnupg2 pinentry-mac
git config --global user.signingkey <YOUR_SIGNING_KEY>
git config --global commit.gpgsign true
git config --global gpg.program gpg

Put the following in gpg.conf file (edit file with nano ~/.gnupg/gpg.conf command):

no-tty

Put the following in gpg-agent.conf file (edit file with nano ~/.gnupg/gpg-agent.conf command):

pinentry-program /usr/local/bin/pinentry-mac

May help killing process gpg-agent that might stuck with old data. So new gpg-agent started would ask for password

jayesh

Follow the below url to setup signed commit https://help.github.com/en/articles/telling-git-about-your-signing-key

if still getting gpg failed to sign the data fatal: failed to write commit object

this is not issue with git ,this is with GPG follow below steps

1.gpg --version

echo "test" | gpg --clearsign

if it is showing:

gpg: signing failed: Inappropriate ioctl for device
gpg: [stdin]: clear-sign failed: Inappropriate ioctl for device

then use export GPG_TTY=$(tty)

4.then again try echo "test" | gpg --clearsign in which PGP signature is got.

git config -l | grep gpg

gpg.program=gpg commit.gpgsign=true

6.apply git commit -S -m "commitMsz"

My two cents here:

When you create and add a key to gpg-agent you define something called passphrase. Now that passphrase at some point expires, and gpg needs you to enter it again to unlock your key so that you can start signing again.

When you use any other program that interfaces with gpg, gpg's prompt to you to enter your passphrase does not appear (basically gpg-agent when daemonized cannot possibly show you the input dialog in stdin).

One of the solutions is gpg --sign a_file.txt then enter the passphrase that you have entered when you created your key and then everything should be fine (gpg-agent should automatically sign)

See this answer on how to set longer timeouts for your passphrase so that you do not have to do this all the time.

Or you can completely remove the passphrase with ssh-keygen -p

To anybody who is facing this issue on MacOS machines, try this:

brew uninstall gpg
brew install gpg2
brew install pinentry-mac (if needed)
gpg --full-generate-key Create a key by using an algorithm.
Get generated key by executing: gpg --list-keys
Set the key here git config --global user.signingkey <Key from your list>
git config --global gpg.program /usr/local/bin/gpg
git config --global commit.gpgsign true
If you want to export your Key to GitHub then: gpg --armor --export <key> and add this key to GitHub at GPG keys: https://github.com/settings/keys (with START and END line included)

If the issue still exists:

test -r ~/.bash_profile && echo 'export GPG_TTY=$(tty)' >> ~/.bash_profile

echo 'export GPG_TTY=$(tty)' >> ~/.profile

If the issue still exists:

Install https://gpgtools.org and sign the key that you used by pressing Sign from the menu bar: Key->Sign

If the issue still exists:

Go to: ‎⁨your global .gitconfig file which in my case is at: ‎⁨/Users/gent/.gitconfig And modify the .gitconfig file (please make sure Email and Name are the same with the one that you have created while generating the Key):

[user]
	email = gent@youremail.com
	name = Gent
	signingkey = <YOURKEY>
[gpg]
	program = /usr/local/bin/gpg
[commit]
	gpsign = true
	gpgsign = true
[filter "lfs"]
	process = git-lfs filter-process
	required = true
	clean = git-lfs clean -- %f
	smudge = git-lfs smudge -- %f
[credential]
	helper = osxkeychain

VonC

Update Oct. 2016: issue 871 did mention "Signing stopped working in Git 2.9.3"

Git for Windows 2.10.1 released two days ago (Oct. 4th, 2016) has fixed Interactive GPG signing of commits and tag.

the recent gpg-sign change in git (which introduces no problem on Linux) exposes a problem in the way in which, on Windows, non-MSYS2-git interacts with MSYS2-gpg.

Original answer:

Reading "7.4 Git Tools - Signing Your Work", I assume you have your "user.signingkey" configuration set.

The last big refactoring (before Git 2.10) around gpg was in commit 2f47eae2a, here that error message was moved to gpg-interface.c

A log on that file reveals the recent change in commit af2b21e (Git 2.10)

gpg2 already uses the long format by default, but most distributions seem to still have "gpg" be the older 1.x version due to compatibility reasons. And older versions of gpg only show the 32-bit short ID, which is quite insecure.

This doesn't actually matter for the verification itself: if the verification passes, the pgp signature is good.
But if you don't actually have the key yet, and want to fetch it, or you want to check exactly which key was used for verification and want to check it, we should specify the key with more precision.

So check how you specified your user.signingkey configuration, and the version of gpg you are using (gpg1 or gpg2), to see if those have any effect on the error message.

There is also commit 0581b54 which changes the condition for the gpg failed to sign the data error message (in complement to commit 0d2b664):

We don't read from stderr at all currently. However, we will want to in a future patch, so this also prepares us there (and in that case gpg does write before reading all of the input, though again, it is unlikely that a key uid will fill up a pipe buffer).

Commit 4322353 shows gpg now uses a temporary file, so there could be right issues around that.

Let's convert to using a tempfile object, which handles the hard cases for us, and add the missing cleanup call.

Using cygwin, I recently switched to gpg2. Then I had the same problem for signing with git after setting git config gpg.program gpg2.

Try echo "test" | gpg2 --clearsign to see whether gpg2 is working. I found it the easiest solution to just set git config gpg.program gpg, because that works. But you will also get a better error this way - e.g. that you need to install pinentry.

phyatt

The git trace was very revealing for my situation...

   GIT_TRACE=1 git commit -m "a commit message"

   13:45:39.940081 git.c:344               trace: built-in: git commit -m 'a commit message'
   13:45:39.977999 run-command.c:640       trace: run_command: gpg --status-fd=2 -bsau 'full name <your-email@domain.com>'
   error: gpg failed to sign the data
   fatal: failed to write commit object

I needed to generate an initial key per the format that git was checking against. It's best to copy the value passed to -bsau above in the logs as is and use below.

So it becomes,

   gpg --quick-generate-key "full name <your-email@domain.com>"

Then it worked.

Hope that helps.

I ran into the same problem. I'm happy to report that the issue lies not with git 2.10.0 but with gnupg 1.4.21.

Temporarily downgrading gnupg to 1.4.20 fixed the issue for me.

If you're using homebrew and you upgraded your packages like I did, you can probably just run brew switch gnupg 1.4.20 to revert back.

If the email assoicated to your GPG key's uid is different to the email you are using in git, you'll need to add another user id to your key OR use a key which email matches exactly.

You can add another UID by using:

$ gpg --edit-key

See for mo https://superuser.com/questions/293184/one-gnupg-pgp-key-pair-two-emails

I must have accidentally updated gpg somehow because I got this after trying to test if gpg works:

gpg: WARNING: server 'gpg-agent' is older than us (2.1.21 < 2.2.10)
gpg: Note: Outdated servers may lack important security fixes.
gpg: Note: Use the command "gpgconf --kill all" to restart them.

Running gpgconf --kill all fixed it for me.

Hope this helps someone.

Might be a hanging gpg-agent.

Try gpgconf --kill gpg-agent as discussed here

I got this error on Ubuntu 18.04 and it turned out that my key was expired.

To see this, I ran this and it confirmed that my keys were expired:

gpg --list-keys

To correct this, I ran (using the ID displayed in the previous command):

gpg --edit-key <ID>

From there, I extended the expiration of key 0 and key 1 following these instructions which boiled down to typing key 0 then expire and following the prompts. Then repeating for key 1.

Afterward, to test this, I ran:

echo test | gpg --clearsign

And before the fix, it failed with the error:

gpg: no default secret key: No secret key
gpg: [stdin]: clear-sign failed: No secret key

But after the fix, the same command successfully signed the message so I knew things were working again!

Make sure you have your email set properly.

git config --global user.email "user@example.com"

I had a similar issue with the latest Git sources (2.12.2) built along with the latest sources of all its dependencies (Zlib, Bzip, cURL, PCRE, ReadLine, IDN2, iConv, Unistring, etc).

It turns out libreadline was giving GnuPG problems:

$ gpg --version
gpg: symbol lookup error: /usr/local/lib/libreadline.so.7: undefined symbol: UP

And of course, trying to get useful information from Git with -vvv failed, so the failure was a mystery.

To resolve the PGP failure due to ReadLine, follow the instructions at Can't update or use package manager -- gpg error:

In terminal:
ls /usr/local/lib
there was a bunch of readline libs in there (libreadline.so.BLAH-BLAH) so i:
su
mkdir temp
mv /usr/local/lib/libreadline* temp
ldconfig

The answers above are great but they did not work for me. What solved my issue was exporting both the public and secret keys.

list the keys from machine where we are exporting from

$ gpg --list-keys
/home/user/.gnupg/pubring.gpg
--------------------------------
pub 1024D/ABCDFE01 2008-04-13
uid firstname lastname (description) <email@example.com>
sub 2048g/DEFABC01 2008-04-13

export the keys

$ gpg --output mygpgkey_pub.gpg --armor --export ABCDFE01
$ gpg --output mygpgkey_sec.gpg --armor --export-secret-key ABCDFE01

go to machine we are importing to and import

$ gpg --import ~/mygpgkey_pub.gpg
$ gpg --allow-secret-key-import --import ~/mygpgkey_sec.gpg

bingo bongo, you're done!

reference: https://www.debuntu.org/how-to-importexport-gpg-key-pair/

ps. My keys were originally made on bootcamp windows 7 and I exported them onto my mac air (same physical machine, different virtually)

None of the above answers seemed to match my problem. My gpg binary (/usr/local/bin/gpg -> /usr/local/MacGPG2/bin/gpg2) was installed as part of GPG Suite, rather than by brew.

Nevertheless, I felt that the advice boiled down to: "use whichever gpg binary is the latest available on brew". So I tried:

brew update
brew upgrade git
brew install gpg

# the following are suggestions from brew's Caveats, to make `/usr/local/bin/gpg`
# point to the brew binary:
rm '/usr/local/bin/gpg'
brew link --overwrite gnupg2

I verified that I had correctly changed the gpg upon my $PATH to point to the new executable from brew:

🍔 which gpg
/usr/local/bin/gpg
🍔 ls -l /usr/local/bin/gpg
lrwxr-xr-x  1 burger  admin  33 Feb 13 13:22 /usr/local/bin/gpg -> ../Cellar/gnupg2/2.0.30_3/bin/gpg

And I also explicitly told git which gpg binary to use:

git config --global gpg.program gpg

Well, maybe that's not completely watertight, as it's sensitive to path. I didn't actually go as far as confirming beyond doubt that git had switched to invoking the brew gpg.

In any case: none of this was sufficient to make git commit successfully sign my commits again.

The thing that worked for me ultimately was to update GPG Suite. I was running version 2016.7, and I found that updating to 2016.10 fixed the problem for me.

I opened GPG Keychain.app, and hit "Check for updates…". With the new version: signed commits worked correctly again.

got it setup by simply :

brew uninstall gpg 

brew install gpg2

Very much like @birchlabs, after a lot of digging/searching I found that it wasn't GPG, but rather GPG Suite. I did cask reinstall gpg-suite and it solved it for me.

I am on Ubuntu 18.04 and got the same error, was worried for weeks too. Finally realized that gpg2 is not pointing towards anything. So simply run

git config --global gpg.program gpg

And tada, it works like charm.

Your commits will now have verified tag with them.

If this just happened randomly and has been working perfectly in the past, as is my case, try logging out (cmd+shift+q) and logging back in. Worked for me

In my case, none of the solutions mentioned in other answer worked. I found out that the problem was specific to one repository. Deleting and cloning the repo again solved the issue.

I stumbled upon this error not because of any configuration issue, but because my key was expired. The easiest way to extend its validity on OSX is to open the GPG Keychain app (if you have it installed) and it will automatically prompt you to extend it. Two clicks, and you're done. Hopefully this helps fellow Googlers :)

I tried quite a few suggestions but no luck, and ended up with this. I know this is not perfect, but I just wanna get back to my work asap.

git config commit.gpgsign false

Check if gpg is enabled using below command

git config -l | grep gpg

if it returns true, Run the below command to disable it

git config --global --unset commit.gpgsign

After successfully running above command, You should be able to run git commit command.

来源：https://stackoverflow.com/questions/39494631/gpg-failed-to-sign-the-data-fatal-failed-to-write-commit-object-git-2-10-0

标签

git

github

gpg-signature