LUA Programming ,ESP8266 NODEMCU Serial communication

问题

I am trying to send data over the serial port of the ESP8266 12E NODE MCU dev kit to an arduino serial port.

I've having a hard time trying to find an example of the syntax used and I tried using serial.print() via the arduino to send data and it works but I'm unsure how to accomplish this in Lua.

Any help is appreciated

I can get the SSID and Password form arduino

INIT.lua

SSID = "XXXX"
Password = "XXXX"
wifi.setmode(wifi.STATION)
wifi.sta.config(SSID,Password) -- Replace with your AP Name and security key.
wifi.sta.connect()
tmr.alarm(1, 1000, 1, function() 
if wifi.sta.getip()== nil then 
print("Obtaining IP...") 
else 
tmr.stop(1)
print("Got IP. "..wifi.sta.getip())
dofile("LED_on_off.lua")

end

end)

LED_ON_OFF LUA

print(wifi.sta.getip())

led2 = 4
gpio.mode(led1, gpio.OUTPUT)
gpio.mode(led2, gpio.OUTPUT)
srv=net.createServer(net.TCP)
srv:listen(80,function(conn)
    conn:on("receive", function(client,request)
        local buf = "";
        local _, _, method, path, vars = string.find(request, "([A-Z]+) (.+)?(.+) HTTP");
        if(method == nil)then
            _, _, method, path = string.find(request, "([A-Z]+) (.+) HTTP");
        end
        local _GET = {}
        if (vars ~= nil)then
            for k, v in string.gmatch(vars, "(%w+)=(%w+)&*") do
                _GET[k] = v
            end
        end
        buf = buf.."<h1> ESP8266 Web Server</h1>";

        buf = buf.."<p>GPIO2 <a href=\"?pin=ON2\"><button>ON</button></a>&nbsp;<a href=\"?pin=OFF2\"><button>OFF</button></a></p>";
        local _on,_off = "",""
        if(_GET.pin == "OFF2")then
              gpio.write(led2, gpio.HIGH);
        elseif(_GET.pin == "ON2")then

**********Here i would like to send data ot arduini that pin is swithced oN ************

              gpio.write(led2, gpio.LOW);
        end
        client:send(buf);
        client:close();
        collectgarbage();
    end)
end)

回答1:

Please read the NodeMCU documentation:

https://nodemcu.readthedocs.io/en/master/

especially

https://nodemcu.readthedocs.io/en/master/en/modules/uart/

It's all there. You don't have to find examples. You have to learn to read and understand documentations. There is no proper programming without reading documentations.

If you only want to tell the arduino that one single thing happened though you might as well just use a digital output and hook it up to an arduino input. Keep it simple and stupid.

来源：https://stackoverflow.com/questions/39966706/lua-programming-esp8266-nodemcu-serial-communication

标签

lua

arduino

esp8266

serial-communication

esplorer