问题
Yesterday I recognized a ton of warnings regarding the parse.com library:
URGENT: all bitcode will be dropped because \'[path]/Parse.framework/Parse(PFAnalytics.o)\' was built without bitcode. You must rebuild it with bitcode enabled (Xcode setting ENABLE_BITCODE), obtain an updated library from the vendor, or disable bitcode for this target. Note: This will be an error in the future.
I am aware of the fact that I can remove those warning with this answer but am now wondering if it will have any negative impact in regards to AppStore submission and / or actual performance of my app.
Xcode informs you regarding bitcode
Activating this setting indicates that the target or project should generate bitcode during compilation for platforms and architectures which support it. For Archive builds, bitcode will be generated in the linked binary for submission to the app store. For other builds, the compiler and linker will check whether the code complies with the requirements for bitcode generation, but will not generate actual bitcode. [ENABLE_BITCODE]
But I am not getting any really useful information out of this text.
- Can I use the linked answer to circumvent the issue without any negative impact and without compromising a future AppStore submission?
- What does the
ENABLE_BITCODEactually do, will it be a non-optional requirement in the future? - Are there any performance impacts if I enable / disable it?
回答1:
- What does the ENABLE_BITCODE actually do, will it be a non-optional requirement in the future?
I'm not sure at what level you are looking for an answer at, so let's take a little trip. Some of this you may already know.
When you build your project, Xcode invokes clang for Objective-C targets and swift/swiftc for Swift targets. Both of these compilers compile the app to an intermediate representation (IR), one of these IRs is bitcode. From this IR, a program called LLVM takes over and creates the binaries needed for x86 32 and 64 bit modes (for the simulator) and arm6/arm7/arm7s/arm64 (for the device). Normally, all of these different binaries are lumped together in a single file called a fat binary.
The ENABLE_BITCODE option cuts out this final step. It creates a version of the app with an IR bitcode binary. This has a number of nice features, but one giant drawback: it can't run anywhere. In order to get an app with a bitcode binary to run, the bitcode needs to be recompiled (maybe assembled or transcoded… I'm not sure of the correct verb) into an x86 or ARM binary.
When a bitcode app is submitted to the App Store, Apple will do this final step and create the finished binaries.
Right now, bitcode apps are optional, but history has shown Apple turns optional things into requirements (like 64 bit support). This usually takes a few years, so third party developers (like Parse) have time to update.
- can I use the above method without any negative impact and without compromising a future appstore submission?
Yes, you can turn off ENABLE_BITCODE and everything will work just like before. Until Apple makes bitcode apps a requirement for the App Store, you will be fine.
- Are there any performance impacts if I enable / disable it?
There will never be negative performance impacts for enabling it, but internal distribution of an app for testing may get more complicated.
As for positive impacts… well that's complicated.
For distribution in the App Store, Apple will create separate versions of your app for each machine architecture (arm6/arm7/arm7s/arm64) instead of one app with a fat binary. This means the app installed on iOS devices will be smaller.
In addition, when bitcode is recompiled (maybe assembled or transcoded… again, I'm not sure of the correct verb), it is optimized. LLVM is always working on creating new a better optimizations. In theory, the App Store could recreate the separate version of the app in the App Store with each new release of LLVM, so your app could be re-optimized with the latest LLVM technology.
回答2:
Make sure to select "All" to find the enable bitcode build settings:
回答3:
Bitcode is a new feature of iOS 9
Bitcode is an intermediate representation of a compiled program. Apps you upload to iTunes Connect that contain bitcode will be compiled and linked on the App Store. Including bitcode will allow Apple to re-optimize your app binary in the future without the need to submit a new version of your app to the store.
Note: For iOS apps, bitcode is the default, but optional. If you provide bitcode, all apps and frameworks in the app bundle need to include bitcode. For watchOS apps, bitcode is required
So you should disabled bitcode until all the frameworks of your app have bitcode enabled.
回答4:
Bitcode makes crash reporting harder. Here is a quote from HockeyApp (which also true for any other crash reporting solutions):
When uploading an app to the App Store and leaving the "Bitcode" checkbox enabled, Apple will use that Bitcode build and re-compile it on their end before distributing it to devices. This will result in the binary getting a new UUID and there is an option to download a corresponding dSYM through Xcode.
Note: the answer was edited on Jan 2016 to reflect most recent changes
回答5:
@vj9 thx. I update to xcode 7 . It show me the same error. Build well after set "NO"
set "NO" it works well.
回答6:
Here you can find all the solution regarding Bitcode
As per Apple Doc
Bitcode is an intermediate representation of a compiled program. Apps you upload to iTunes Connect that contain bitcode will be compiled and linked on the store. Including bitcode will allow Apple to re-optimize your app binary in the future without the need to submit a new version of your app to the store.
Xcode hides symbols generated during build time by default, so they are not readable by Apple. Only if you choose to include symbols when uploading your app to iTunes Connect would the symbols be sent to Apple. You must include symbols to receive crash reports from Apple.
Note: For iOS apps, bitcode is the default, but optional. For watchOS and tvOS apps, bitcode is required. If you provide bitcode, all apps and frameworks in the app bundle (all targets in the project) need to include bitcode. After you distribute your app using iTunes Connect, you can download the dSYMs file for the build, described in Viewing and Importing Crashes in the Devices Window
Apple's initial roll-out of the bitcode and app thinning service was put on hold, because issues in upgrading from one type of hardware to a different type of hardware didn't restore the right versions of binaries. This issue was subsequently fixed with iOS 9.0.2 and the feature re-enabled.
Bitcode has always been a part of the LLVM compile and optimisation phases, but by moving the back-end logic to the Apple servers, it moves the optimise and assemble phases from developer compile time to App Store deployment. This unlocks the potential of future re-optimisation or re-translation to support newer and faster processors in future. Bitcode deployments are required for watchOS and tvOS deploments, and can be conditionally enabled for existing iOS deployments with the "Enable Bitcode" option in the project settings. This will add a flag embed-bitcode-marker for debug builds, and embed-bitcode for archive/device builds. These can be passed to the Swift compiler with -embed-bitcode or by using clang with -fembed-bitcode.
Bitcode also has some disadvantages. Developers can debug crash reports from applications by storing copies of the debug symbols corresponding to the binary that was shipped to Apple. When a crash happens in a given stack, the developer can restore the original stack trace by symbolicating the crash report, using these debug symbols. However, the symbols are a by-product of translating the intermediate form to the binary; but if that step is done on the server, this information is lost. Apple provides a crash reporting service that can play the part of the debugger, provided that the developer has uploaded the debug symbols at the time of application publication. The fact that the developer never sees the exact binary means that they may not be able to test for speciic issues as new hardware evolves. There are also some concerns about ceding power to Apple to perform compilation – including the ability to inject additional routines or code snippets – but since Apple is in full control of the publication process these are currently possible whether or not the developer uses bitcode or compiled binaries.
Finally, the bitcode on the server can be translated to support new architectures and instruction sets as they evolve. Provided that they maintain the calling convention and size of the alignment and words, a bitcode application might be translated into different architecture types and optimised specifically for a new processor. If standard libraries for math and vector routines are used, these can be optimised into processor specific vector instructions to gain the best performance for a given application. The optimisers might even generate multiple different encodings and judge based on size or execution speed.
For more info Please check Here and Here
回答7:
From the docs
- can I use the above method without any negative impact and without compromising a future appstore submission?
Bitcode will allow apple to optimise the app without you having to submit another build. But, you can only enable this feature if all frameworks and apps in the app bundle have this feature enabled. Having it helps, but not having it should not have any negative impact.
- What does the ENABLE_BITCODE actually do, will it be a non-optional requirement in the future?
For iOS apps, bitcode is the default, but optional. If you provide bitcode, all apps and frameworks in the app bundle need to include bitcode. For watchOS apps, bitcode is required.
- Are there any performance impacts if I enable / disable it?
The App Store and operating system optimize the installation of iOS and watchOS apps by tailoring app delivery to the capabilities of the user’s particular device, with minimal footprint. This optimization, called app thinning, lets you create apps that use the most device features, occupy minimum disk space, and accommodate future updates that can be applied by Apple. Faster downloads and more space for other apps and content provides a better user experience.
There should not be any performance impacts.
来源：https://stackoverflow.com/questions/31088618/impact-of-xcode-build-options-enable-bitcode-yes-no