virtual-pc

Automate Virtual PC 2007 with PowerShell?

由 ﹥＞﹥吖頭↗ 提交于 2020-01-22 13:46:04
问题 This is basically a duplicate of this question, but the accepted answer was "no" and I would like to keep this question open until getting an actual answer instead of accepting "NO" and giving up. Stephen Rose told me via Twitter DM to use PowerShell to start and stop Virtual PC VM's and do things like run installations, automatic updates and virus scans, but he hasn't yet responded to my request for any links to resources that describe how to do so. I've started learning PowerShell, but I

How to connect to host machine from within Virtual PC image

由 倾然丶 夕夏残阳落幕 提交于 2019-12-14 01:30:46
问题 I am putting together a SVN demonstration using a WinXP Virtual PC image, and am unable to see my host machine from within the VPC guest OS. This demo will be performed while disconnected from our LAN, so I installed the Microsoft Loopback adapter on my laptop. In the TCP/IP settings I manually set the IP address to 192.168.3.1 to avoid conflicts with our internal network. In the VPC image settings I set the Network Type to Microsoft Loopback Adapter and set the IP address to 192.168.3.2. I

Is there a way (API/Scripting) to work with Virtual PC?

由 流过昼夜 提交于 2019-12-11 07:08:01
问题 Is there a way to interact with Virtual PC 1 ? Looking to do basic things like startup and shutdown (with choice of save or turn off etc..) specific VM's. Any solution other than simulating key presses would be fine, for example WMI COM+ ADSI PowerShell 1 - Specifically for Virtual PC as in Microsoft Virtual PC (i.e. the one that runs on Vista and earlier), not Windows Virtual PC (i.e. the Win7 one) 回答1: Alas, no, see http://www.aspdeveloper.net/Virtual_PC/rn-739-16434_Virtual_PC_API.aspx .

COM port communication with Virtual PC (part 2)

由 假装没事ソ 提交于 2019-12-11 05:25:11
问题 This question is related to my earlier question. Connecting to the pipe is now successful, but I still cannot read (or write) any data from the port. My first guess was, that the data are buffered. But even when I write (on the client site) 5000 bytes (the buffer in NamedPipeClientStream is 512 byte large), I do not receive any data. PipeOptions.WriteThrough didn't changed anything, too. When I do not use a pipe, but a textfile (in the Virtual-PC settings) to redirect the data written to the

COM port communication with Virtual PC

由 [亡魂溺海] 提交于 2019-12-08 07:16:57
问题 I am testing an application that uses the COM-Port. The application is running in Virtual PC. I have set up the Virtual PC settings to use the named pipe \.\pipe\mypipe for COM1-Port. Now I am trying to communicate with this named pipe using C#. using (var pipe = new NamedPipeServerStream(@"\\.\pipe\mypipe")) { pipe.WaitForConnection(); using (var reader = new StreamReader(pipe)) { // Do some communication here } } The program is waiting at WaitForConnection() although Virtual PC is running

Determine if my PC supports HW Virtualization

由 爷，独闯天下 提交于 2019-11-30 15:28:50
问题 How, in general, does one determine if a PC supports hardware virtualization? I use VirtualPC to set up parallel test environments and I'd enjoy a bit of a speed boost. 回答1: Download this: http://www.cpuid.com/cpuz.php Also check, http://en.wikipedia.org/wiki/X86_virtualization Edit: Additional, I know it's for XEN but the instructions are the same for all VMs that want hardware support. http://wiki.xensource.com/xenwiki/HVM_Compatible_Processors I can't try it from work, but I'm sure it can

Accessing ASP.NET Development Server from another pc on the network

由 China☆狼群 提交于 2019-11-29 23:01:31
I would like to test my web app in other browsers. I have installed Virtual PC to do just that. the ASP.NET development server does not allow remote connections so the virtual pc (another computer on the network) cannot access the website. I found this post that was started but there was no solution. I understand that using localhost will not work. I heard about using the machines ip, but how do I get that correct ip? Look at my lynksys router admin? If I were to get as far as getting my IP, im sure that the asp.net dev server does not allow remote connections. How do I enable it to do so? I'm

Accessing ASP.NET Development Server from another pc on the network

由 亡梦爱人 提交于 2019-11-28 20:50:55
问题 I would like to test my web app in other browsers. I have installed Virtual PC to do just that. the ASP.NET development server does not allow remote connections so the virtual pc (another computer on the network) cannot access the website. I found this post that was started but there was no solution. I understand that using localhost will not work. I heard about using the machines ip, but how do I get that correct ip? Look at my lynksys router admin? If I were to get as far as getting my IP,

Determine when running in a virtual machine

由 别等时光非礼了梦想. 提交于 2019-11-28 15:18:20
Is there an official way for an application to determine if it is running in VMWare or Virtual PC (or whatever Microsoft is calling it now)? The code I have seen is usually a hack that took advantage of some odd behavioral side effect in a specific version of VMWare or Virtual PC. Ideally Delphi code, but if you can link to an official explanation then I am sure I can convert it. Marshall Fryman I wrote a series of articles last year on this, with source code. VMware and Wine detection are here . Virtual PC is here . All three of these have pretty iron-clad detection because there are

Determine when running in a virtual machine

由 走远了吗. 提交于 2019-11-27 09:07:49
问题 Is there an official way for an application to determine if it is running in VMWare or Virtual PC (or whatever Microsoft is calling it now)? The code I have seen is usually a hack that took advantage of some odd behavioral side effect in a specific version of VMWare or Virtual PC. Ideally Delphi code, but if you can link to an official explanation then I am sure I can convert it. 回答1: I wrote a series of articles last year on this, with source code. VMware and Wine detection are here. Virtual
订阅 virtual-pc