nic

GCP static public IP on VM NIC

余生颓废 提交于 2021-01-29 07:49:40
问题 I have a problem with a a particular licensed software that I have installed on a VM, and the software license should be tie to a public IP address on the NIC of the VM. The software checks the IP address of the server where the application is installed and verifies against the public license server of the application manufacturer, and if the IP address doesn't match, the software stops working. The software company has issue temporary license to my VM using private IP address, since I wasn't

Differentiate VMware network adapter from physical network adapters -or- Detect Virtual Network Adaptor

元气小坏坏 提交于 2020-12-24 04:31:48
问题 I have to differentiate between the real addresses and the VM addresses using any Windows API. I'm using GetAdaptersAddresses API to populate a list of IP addresses for the local machine. I need to extract only the "real" addresses apart from the addresses associated with the VMware network adapter and other addresses (auto-configuration and tunnel adapter addresses). I've not been able to find any API or any flag to differentiate this. Is there any way this can be done? PS : The IfType flag

Differentiate VMware network adapter from physical network adapters -or- Detect Virtual Network Adaptor

拟墨画扇 提交于 2020-12-24 04:31:12
问题 I have to differentiate between the real addresses and the VM addresses using any Windows API. I'm using GetAdaptersAddresses API to populate a list of IP addresses for the local machine. I need to extract only the "real" addresses apart from the addresses associated with the VMware network adapter and other addresses (auto-configuration and tunnel adapter addresses). I've not been able to find any API or any flag to differentiate this. Is there any way this can be done? PS : The IfType flag

Checking internet connection from C++ code

☆樱花仙子☆ 提交于 2020-05-10 06:59:05
问题 While working with large codebase for legacy applications, whenever I have seen a piece of code that checks whether an internet connection is active or not, I have mostly seen the uses of functions such as: InternetCheckConnection(L"http://www.google.com",FLAG_ICC_FORCE_CONNECTION,0) //or BOOL bConnected = IsNetworkAlive(&dwSens) //or InternetGetConnectedState(&dwReturnedFlag, 0) //or some other functions but there exists a very very simple way to do this where you wouldn't need to include

While using DPDK application, rte_eth_dev_count is returning 0 always

主宰稳场 提交于 2020-01-02 15:08:20
问题 I have configured NIC cards as below:- [root@localhost ethtool]# ../../tools/dpdk-devbind.py -s Network devices using DPDK-compatible driver ============================================ 0000:81:00.0 'NetXtreme BCM5722 Gigabit Ethernet PCI Express' drv=igb_uio unused=tg3 Network devices using kernel driver =================================== 0000:02:00.0 '82599ES 10-Gigabit SFI/SFP+ Network Connection' if=ens513f0 drv=ixgbe unused=igb_uio 0000:02:00.1 '82599ES 10-Gigabit SFI/SFP+ Network

While using DPDK application, rte_eth_dev_count is returning 0 always

感情迁移 提交于 2020-01-02 15:08:14
问题 I have configured NIC cards as below:- [root@localhost ethtool]# ../../tools/dpdk-devbind.py -s Network devices using DPDK-compatible driver ============================================ 0000:81:00.0 'NetXtreme BCM5722 Gigabit Ethernet PCI Express' drv=igb_uio unused=tg3 Network devices using kernel driver =================================== 0000:02:00.0 '82599ES 10-Gigabit SFI/SFP+ Network Connection' if=ens513f0 drv=ixgbe unused=igb_uio 0000:02:00.1 '82599ES 10-Gigabit SFI/SFP+ Network

Programmatically disable/enable network interface

a 夏天 提交于 2019-12-29 03:28:06
问题 I'm trying to come up with a solution to programmatically enable/disable the network card - I've done a ton of research and nothing seems to be a workable solution in both XP and Vista environments. What I'm talking about is if you went into the Control Panel 'Network Connections', right clicked on one and picked either enable or disable. Ideally I'd like to use a library, but if worse comes to worse I supposed I could call out to a commandline app, but that's absolute worst case. Here's what

Determine Active NIC address using python console commands

自闭症网瘾萝莉.ら 提交于 2019-12-25 09:11:09
问题 I am trying to find an active NIC, an active NIC is one where the command wil return UP for me. In my command: # cat /sys/class/net/eth0/operstate I am returned a value of UP In another command, I type: # cat /sys/class/net/eth1/operstate I get a value of DOWN Overall I have 4 eth's. I basically have to use the command to determine UP or DOWN /sys/class/net/eth[0|1|2|3]/operstate = up | down I want to be able to write a program where I will be able to return the eth[0|1|2|3] value that is UP.

Assigning IP from Batch Script

回眸只為那壹抹淺笑 提交于 2019-12-23 15:01:11
问题 With the below code I am getting an error "Invalid interface LAN: specified". This code works in Win7, however, does NOT working in windows XP. I suspect it has something to do with the "!adapterName!" conflicting within XP. I utilize this script to obtain the NIC Name in case it changes in the future some how and would like to keep this scheme. Any ideas how I can continue with such script in an XP environment? :: Set primary and alternate DNS for IPv4 @ECHO OFF for /f "tokens=* delims=0" %

Programmatically check whether my machine has internet access or not

人盡茶涼 提交于 2019-12-18 05:44:31
问题 How can I programmatically check whether my machine has internet access or not using C/C++, is it just a matter of pinging an IP? How does NIC do it ? I mean something like: I am using Windows 7. 回答1: If you work on Windows, just try this #include <iostream> #include <windows.h> #include <wininet.h> using namespace std; int main(){ if(InternetCheckConnection(L"http://www.google.com",FLAG_ICC_FORCE_CONNECTION,0)) { cout << "connected to internet"; } return 0; } 回答2: There is nothing of that