pip connection failure: cannot fetch index base URL http://pypi.python.org/simple/

问题

I run sudo pip install git-review, and get the following messages:

Downloading/unpacking git-review
  Cannot fetch index base URL http://pypi.python.org/simple/
  Could not find any downloads that satisfy the requirement git-review
No distributions at all found for git-review
Storing complete log in /home/sai/.pip/pip.log

Does anyone has any idea about this?

回答1:

I know this is an old thread, but I encountered this issue today and wanted to share my solution to the problem because I haven't seen this solution elsewhere on SO.

My environment: Python 2.7.12/2.7.14 on Ubuntu 12.04.5 LTS in a virtualenv, pip version 1.1.

My Errors:

pip install nose

in console:

Cannot fetch index base URL http://pypi.python.org/simple/

in ~/.pip/pip.log:

Could not fetch URL http://pypi.python.org/simple/: HTTP Error 403: SSL is required

Curious for me because I had been running these same commands in a script without issue for about a year.

this fixed it:

pip install --index-url=https://pypi.python.org/simple/ nose

(note the https)

Hope this helps someone!

回答2:

You need to upgrade your pip installation.

The --index-url (short version: -i) option allows you to specify an index-url in the call to pip itself, there you can use the https-variant. Then you can instruct pip to upgrade itself.

sudo pip install --index-url https://pypi.python.org/simple/ --upgrade pip

Afterwards you should be able to use pip without the --index-url option.

---

I believe that the release 7.0.0 (2015-05-21) triggered this issue. The release note for that version states the following:

BACKWARD INCOMPATIBLE No longer implicitly support an insecure origin origin, and instead require insecure origins be explicitly trusted with the --trusted-host option.

You can check your pip version with pip --version.

This would mean that issuing sudo pip install --trusted-host --upgrade pip once would also solve this issue, albeit download pip over insecure http. This might also not work at all, because it is possible that the insecure endpoint is no longer accessible on the server (I have not tested this).

回答3:

EDIT:

The current version of PIP no longer has this issue. As of right now, version: 7.1.2 is the current version. Here is the PIP link:

https://pypi.python.org/pypi/pip

ORIGINAL FIX:

I got this issue when trying to use pip==1.5.4

This is an issue related to PIP and Python's PYPI trusting SSL certificates. If you look in the PIP log in Mac OS X at: /Users/username/.pip/pip.log it will give you more detail.

My workaround to get PIP back up and running after hours of trying different stuff was to go into my site-packages in Python whether it is in a virtualenv or in your normal site-packages, and get rid of the current PIP version. For me I had pip==1.5.4

I deleted the PIP directory and the PIP egg file. Then I ran

easy_install pip==1.2.1  

This version of PIP doesn't have the SSL issue, and then I was able to go and run my normal pip install -r requirements.txt within my virtualenv to set up all packages that I wanted that were listed in my requirements.txt file.

This is also the recommended hack to get passed the issue by several people on this Google Group that I found:

https://groups.google.com/forum/#!topic/beagleboard/aSlPCNYcVjw

回答4:

I added --proxy command line option to point to the proxy and it's working (pip version is 1.5.4 and python 2.7). for some reason it was not taking the shell env variables HTTPS_PROXY, HTTP_PROXY, https_proxy, http_proxy.

sudo pip --proxy [user:passwd@]proxy.server:port install git-review

回答5:

Check your proxy connection, I had a similar issue, then I changed my connection which wasn't proxied and boom, of it started downloading and setting up the library

回答6:

I had the same problem with pip==1.5.6. I had to correct my system time.

# date -s "2014-12-09 10:09:50"

回答7:

I had the same issue with pip 1.5.6.

I just deleted the ~/.pip folder and it worked like a charm.

rm -r ~/.pip/

回答8:

This worked for me on Ubuntu 12.04.

pip install --index-url=https://pypi.python.org/simple/ -U scikit-learn

回答9:

If that's not a proxy/network problem you should try to create/edit config file .pip/pip.conf or if you are running pip as root /root/.pip/pip.conf. Check and change index-url from http to https.

It should be like this:

[global] 
index-url=https://pypi.python.org/simple/

Worked for me with Ubuntu 12 and pip 9.0.1

回答10:

it works!

sudo pip --proxy=http://202.194.64.89:8000 install elasticsearch ; 202.194.64.89:8000 is my PROXY,

回答11:

I was able to fix this by upgrading my python, which had previously been attached to an outdated version of OpenSSL. Now it is using 1.0.1h-1 and my package will pip install.

FYI, my log and commands, using anaconda and installing the pytest-ipynb package [1] :

$ conda update python
Fetching package metadata: ....
Solving package specifications: .
Package plan for installation in environment /Users/me/anaconda/envs/py27:

The following NEW packages will be INSTALLED:
    openssl:  1.0.1h-1

The following packages will be UPDATED:
    python:   2.7.5-3  --> 2.7.8-1
    readline: 6.2-1    --> 6.2-2
    sqlite:   3.7.13-1 --> 3.8.4.1-0
    tk:       8.5.13-1 --> 8.5.15-0

Proceed ([y]/n)? y
Unlinking packages ...
[      COMPLETE      ] |#############################################################| 100%
Linking packages ...
[      COMPLETE      ] |#############################################################| 100%

$ pip install pytest-ipynb
Downloading/unpacking pytest-ipynb
  Downloading pytest-ipynb-0.1.1.tar.gz
  Running setup.py (path:/private/var/folders/4f/b8gwyhg905x94twqw2pbklyw0000gn/T/pip_build_me/pytest-ipynb/setup.py) egg_info for package pytest-ipynb

Requirement already satisfied (use --upgrade to upgrade): pytest in /Users/me/anaconda/envs/py27/lib/python2.7/site-packages (from pytest-ipynb)
Installing collected packages: pytest-ipynb
  Running setup.py install for pytest-ipynb

Successfully installed pytest-ipynb
Cleaning up...

[1] My ticket about this issue; https://github.com/zonca/pytest-ipynb/issues/1

回答12:

I faced same problem but that was related proxy. it was resolved by setting proxy.

Set http_proxy=http://myuserid:mypassword@myproxyname:myproxyport
Set https_proxy=http://myuserid:mypassword@myproxyname:myproxyport

This might help someone.

回答13:

If your proxy is configured correctly, then pip version 1.5.6 will handle this correctly. The bug was resolved.

You can upgrade pip with easy_install pip==1.5.6

回答14:

Extra answer: if you are doing this from chroot.

You need source of random numbers to be able to establish secure connection to pypi.

On linux, you can bind-mount host dev to chroot dev:

mount --bind /dev /path-to-chroot/dev

回答15:

I also got this error while installing pyinstaller in a proxied connection. I just connect direct Internet connection(Using my dongle) and did that again.

 sudo pip install pyinstaller

This worked for me.

回答16:

You might be missing a DNS server conf in /etc/resolv.conf

make sure u can ping to: ping pypi.python.org

if you're not getting a ping try to add a DNS server to file...something like:

nameserver xxx.xxx.xxx.xxx

回答17:

My explanation/enquiry is for windows environment.
I am pretty new to python, and this is for someone still novice than me.
I installed the latest pip(python installer package) and downloaded 32 bit/64 bit (open source) compatible binaries from http://www.lfd.uci.edu/~gohlke/pythonlibs/, and it worked.

Steps followed to install pip, though usually pip is installed by default during python installation from www.python.org/downloads/
- Download pip-7.1.0.tar.gz from https://pypi.python.org/pypi/pip.
- Unzip and un-tar the above file.
- In the pip-7.1.0 folder, run: python setup.py install. This installed pip latest version.

Use pip to install(any feasible operation) binary package. Run the pip app to do the work(install file), as below:
\python27\scripts\pip2.7.exe install file_path\file_name --proxy
If you face, wheel(i.e egg) issue, use the compatible binary package file. Hope this helps.

回答18:

In my case (Python 3.4, in a virtual environment, running under macOS 10.10.6) I could not even upgrade pip itself. Help came from this SO answer in the form of the following one-liner:

curl https://bootstrap.pypa.io/get-pip.py | python

(If you do not use a virtual environment, you may need sudo python.)

With this I managed to upgrade pip from Version 1.5.6 to Version 10.0.0 (quite a jump!). This version does not use TLS 1.0 or 1.1 which are not supported any more by the Python.org site(s), and can install PyPI packages nicely. No need to specify --index-url=https://pypi.python.org/simple/.

回答19:

in my case I would install django (

pip install django

) and it has a same problem with ssl certificate (Cannot fetch index base URL http://pypi.python.org/simple/ )

it's from virtualenv so DO :

FIRST: delete your virtualenv

deactivate rm -rf env

SECOND: check have pip

pip3 -V

if you don't have

sudo apt-get install python3-pip

FINALLY:

install virtualenv with nosite-packages and make your virenviroment

sudo pip3 install virtualenv virtualenv --no-site-packages -p /usr/bin/python3.6

. env/bin/activate

回答20:

I had a similar problem, but in my case I was getting the error:

Downloading/unpacking bencode
  Cannot fetch index base URL http://c.pypi.python.org/simple/
  Could not find any downloads that satisfy the requirement bencode
No distributions at all found for bencode
Storing complete log in /home/andrew/.pip/pip.log

In my case I was able to fix the error by editing ~/.pip/pip.conf and changing http://c.pypi.python.org/simple/ to http://pypi.python.org/simple and then pip worked fine again.

回答21:

I got this error message in ~/.pip/pip.log

Could not fetch URL https://pypi.python.org/simple/: connection error: [Errno 185090050] _ssl.c:344: error:0B084002:x509 certificate routines:X509_load_cert_crl_file:system lib
  Will skip URL https://pypi.python.org/simple/ when looking for download links for regulargrid

I fixed it by updating my ~/.pip/pip.conf. It accidentally pointed to cacert.pem file that did not exist and looked like this

[global]
cert = /some/path/.pip/cacert.pem

回答22:

I used to use the easy_install pip==1.2.1 workaround but I randomly found that if you're having this bug, you probably installed a 32bit version of python.

If you install a 64bit version of it by installing it from the source and then build you virtualenv upon it, you wont have that pip bug anymore.

回答23:

I too used the chosen solution (downgrading pip) to work around this issue until I ran into another seemingly unrelated issue caused by the same underlying problem. Python's version of OpenSSL was out of date. Check your OpenSSL version:

python -c 'import ssl; print(ssl.OPENSSL_VERSION)'

If the version is 0.9.7, that should verify that OpenSSL needs to be updated. If you know how to do that directly, great (but please let me know in a comment). If not, you can follow the advice in this answer, and reinstall python from the 64 bit/32 bit installer instead of the 32 bit only installer from python.org (I'm using python 3.4.2). I now have OpenSSL version 0.9.8, and none of these issues.

回答24:

Try doing reinstallation of pip :

curl -O https://pypi.python.org/packages/source/p/pip/pip-1.2.1.tar.gz
tar xvfz pip-1.2.1.tar.gz
cd pip-1.2.1
python setup.py install

If curl doesnot work , you will have proxy issues , Please fix that it should work fine. Check after opening google.com in your browser in linux.

The try installing

pip install virtualenv

回答25:

In case you use a firewall, make sure outbound connections to port 443 are not blocked, e.g. run:

sudo iptables -A OUTPUT -p tcp --dport 443 -j ACCEPT

回答26:

I have met the same questions with you. When I realize it may be caused by unmatched version of numpy or pip, I uninstalled numpy and pip, then continue as this 'https://radimrehurek.com/gensim/install.html', at last I succeed!

回答27:

C:\Users\Asus>pip install matplotlib
Downloading/unpacking matplotlib
  Cannot fetch index base URL https://pypi.python.org/simple/
  Could not find any downloads that satisfy the requirement matplotlib
Cleaning up...
No distributions at all found for matplotlib
Storing debug log for failure in C:\Users\Asus\pip\pip.log

I used 'easy_install pip==1.2.1' and it worked fine.

C:\Users\Asus>easy_install pip==1.2.1
Searching for pip==1.2.1
Reading https://pypi.python.org/simple/pip/
Best match: pip 1.2.1
Downloading ...

Then on using this command 'pip install matplotlib'

C:\Users\Asus>pip install matplotlib
Downloading/unpacking matplotlib
  Downloading matplotlib-2.0.0b4.tar.gz (unknown size):

回答28:

If you're running these commands in a Docker container on Windows, it may mean that your docker machine's network connection is stale and needs to be rebuilt. To fix it, run these commands:

docker-machine stop
docker-machine start
@FOR /f "tokens=*" %i IN ('docker-machine env') DO @%i

回答29:

I'm now getting this in $HOME/.pip/pip.log:

Could not fetch URL https://pypi.python.org/simple/: HTTP Error 403: TLSv1.2+ is required

I don't have a straightforward solution for this, but I'm mentioning it as something to watch out for before you waste time on trying some of the other solutions here.

• I'm obviously already using a https URL
• There is no proxy or firewall issue
• Using trusted-host didn't change anything (dunno where I picked this up)

For what it's worth my openssl is too old to even have ssl.OPENSSL_VERSION so maybe that's really the explanation here.

In the end, wiping my virtual environment and recreating it with virtualenv --setuptools env seems to have fixed at least the major blockers.

This is on a really old Debian box, Python 2.6.6.

回答30:

My problem was the system virtualenv version.

When I created an env with python3 venv everything worked. But when I used virtualenv (by default with python2.7) to create an env I receive those error messages.

In the virtualenv created the pip version was 1.5.6, but my system pip version was 10.0.1

Then I ran (outside any env):

pip install virtualenv --upgrade

It upgraded virtualenv to version 16.0.0 and now my pip install in the envs created with virtualenv and python2.7 work flawlessly. Also, the pip version inside the env is now 10.0.1.

Before upgrade:

来源：https://stackoverflow.com/questions/21294997/pip-connection-failure-cannot-fetch-index-base-url-http-pypi-python-org-simpl