问题
I've got a compound USB + CDC device I built using a PIC32 microcontroller, and I'm trying to connect to the device and send some data to the CDC data interface endpoint from my Mac.
I know the circuit works 100%, as the device registers as both a HID joystick, and I'm able to connect to the device using Zoc terminal, on /dev/tty.usbmodemfa132. I can send commands with Zoc, and see my MCU responding to these commands by blinking some LEDs on the circuit.
I'm running this on Mac OS X Mavericks, but had the same problem with a similar example I gave up on, a few weeks ago on Mountain Lion.
My code looks like follows:
// Includes -----------------------------------------------------------------------------------------------------------
#include <stdbool.h>
#include <stdio.h>
#include <stdlib.h>
#include <libusb-1.0/libusb.h>
#include <unistd.h>
// Defines ------------------------------------------------------------------------------------------------------------
#define VID 0x04d8
#define PID 0x005e
#define CDC_DATA_INTERFACE_ID 2
// Function Declarations ----------------------------------------------------------------------------------------------
void print_device(libusb_device *device);
void send(libusb_context *usb_context, uint16_t vid, uint16_t pid);
// Function Definitions -----------------------------------------------------------------------------------------------
/**
* main
*/
int main(int argc, char **argv)
{
libusb_device **usb_devices = NULL;
libusb_context *usb_context = NULL;
ssize_t device_count = 0;
bool debug_enabled = false;
int c;
// Collect command line attributes
while ( (c = getopt(argc, argv, "d")) != -1) {
switch (c) {
case 'd':
debug_enabled = true;
break;
}
}
// Initialize USB context
int result = libusb_init(&usb_context);
if(result < 0) {
printf("Unable to initialise libusb!");
return EXIT_FAILURE;
}
// Turn debug mode on/off
if(debug_enabled) {
libusb_set_debug(usb_context, 3);
}
// Get USB device list
device_count = libusb_get_device_list(usb_context, &usb_devices);
if(device_count < 0) {
puts("Unable to retrieve USB device list!");
}
// Iterate and print devices
puts("VID PID Manufacturer Name\n------ ------ -------------------");
for (int i = 0; i < device_count; i++) {
print_device(usb_devices[i]);
}
// Attempt to send data
send(usb_context, VID, PID);
// Cleanup and exit
libusb_free_device_list(usb_devices, 1);
libusb_exit(usb_context);
return EXIT_SUCCESS;
}
/**
* print_device
*/
void print_device(libusb_device *device)
{
struct libusb_device_descriptor device_descriptor;
struct libusb_device_handle *device_handle = NULL;
// Get USB device descriptor
int result = libusb_get_device_descriptor(device, &device_descriptor);
if (result < 0) {
printf("Failed to get device descriptor!");
}
// Only print our devices
if(VID == device_descriptor.idVendor && PID == device_descriptor.idProduct) {
// Print VID & PID
printf("0x%04x 0x%04x", device_descriptor.idVendor, device_descriptor.idProduct);
} else {
return;
}
// Attempt to open the device
int open_result = libusb_open(device, &device_handle);
if (open_result < 0) {
libusb_close(device_handle);
return;
}
// Print the device manufacturer string
char manufacturer[256] = " ";
if (device_descriptor.iManufacturer) {
libusb_get_string_descriptor_ascii(device_handle, device_descriptor.iManufacturer,
(unsigned char *)manufacturer, sizeof(manufacturer));
printf(" %s", manufacturer);
}
puts("");
libusb_close(device_handle);
}
/**
* send
*/
void send(libusb_context *usb_context, uint16_t vid, uint16_t pid)
{
libusb_device_handle *device_handle;
device_handle = libusb_open_device_with_vid_pid(usb_context, vid, pid);
if (device_handle == NULL) {
puts("Unable to open device by VID & PID!");
return;
}
puts("Device successfully opened");
unsigned char *data = (unsigned char *)"test";
if (libusb_kernel_driver_active(device_handle, CDC_DATA_INTERFACE_ID)) {
puts("Kernel driver active");
if (libusb_detach_kernel_driver(device_handle, CDC_DATA_INTERFACE_ID)) {
puts("Kernel driver detached");
}
} else {
puts("Kernel driver doesn't appear to be active");
}
int result = libusb_claim_interface(device_handle, CDC_DATA_INTERFACE_ID);
if (result < 0) {
puts("Unable to claim interface!");
libusb_close(device_handle);
return;
}
puts("Interface claimed");
int written = 0;
result = libusb_bulk_transfer(device_handle, (3 | LIBUSB_ENDPOINT_OUT), data, 4, &written, 0);
if (result == 0 && written == 4) {
puts("Send success");
} else {
puts("Send failed!");
}
result = libusb_release_interface(device_handle, CDC_DATA_INTERFACE_ID);
if (result != 0) {
puts("Unable to release interface!");
}
libusb_close(device_handle);
}
I'm getting the following error output:
libusb: 0.828223 error [darwin_open] USBDeviceOpen: another process has device opened for exclusive access
libusb: 0.828241 info [darwin_open] device open for access
Device successfully opened
Kernel driver doesn't appear to be active
libusb: 0.828641 error [darwin_claim_interface] USBInterfaceOpen: another process has device opened for exclusive access
Unable to claim interface!
libusb: 0.828766 info [event_thread_main] thread exiting
Is there a way I can release the USB device from the other process, freeing it up so I can claim it?
Is there an alternative way I can connect to /dev/tty.usbmodemfa132 to send and receive data to the CDC interface on the USB device?
An alternative to libusb perhaps?
回答1:
That's right. While libusb seems to be all-powerful in Linux, you cannot use it to connect to a USB CDC interface on Mac OS X because that interface is already claimed by the AppleUSBCDCACM driver.
What you should do is use the standard way that people connect to serial ports. This will be easier because you don't have to worry about endpoints and bulk transfers and such. Here is some example cross-platform C code I wrote for one of our CDC-based products that connects to a COM port to read and write some data (source). It uses the standard functions open, read, and write.
// Uses POSIX functions to send and receive data from a Maestro.
// NOTE: You must change the 'const char * device' line below.
#include <fcntl.h>
#include <stdio.h>
#include <unistd.h>
#ifdef _WIN32
#define O_NOCTTY 0
#else
#include <termios.h>
#endif
// Gets the position of a Maestro channel.
// See the "Serial Servo Commands" section of the user's guide.
int maestroGetPosition(int fd, unsigned char channel)
{
unsigned char command[] = {0x90, channel};
if(write(fd, command, sizeof(command)) == -1)
{
perror("error writing");
return -1;
}
unsigned char response[2];
if(read(fd,response,2) != 2)
{
perror("error reading");
return -1;
}
return response[0] + 256*response[1];
}
// Sets the target of a Maestro channel.
// See the "Serial Servo Commands" section of the user's guide.
// The units of 'target' are quarter-microseconds.
int maestroSetTarget(int fd, unsigned char channel, unsigned short target)
{
unsigned char command[] = {0x84, channel, target & 0x7F, target >> 7 & 0x7F};
if (write(fd, command, sizeof(command)) == -1)
{
perror("error writing");
return -1;
}
return 0;
}
int main()
{
// Open the Maestro's virtual COM port.
const char * device = "\\\\.\\USBSER000"; // Windows, "\\\\.\\COM6" also works
//const char * device = "/dev/ttyACM0"; // Linux
//const char * device = "/dev/cu.usbmodem00034567"; // Mac OS X
int fd = open(device, O_RDWR | O_NOCTTY);
if (fd == -1)
{
perror(device);
return 1;
}
#ifndef _WIN32
struct termios options;
tcgetattr(fd, &options);
options.c_lflag &= ~(ECHO | ECHONL | ICANON | ISIG | IEXTEN);
options.c_oflag &= ~(ONLCR | OCRNL);
tcsetattr(fd, TCSANOW, &options);
#endif
int position = maestroGetPosition(fd, 0);
printf("Current position is %d.\n", position);
int target = (position < 6000) ? 7000 : 5000;
printf("Setting target to %d (%d us).\n", target, target/4);
maestroSetTarget(fd, 0, target);
close(fd);
return 0;
}
回答2:
If you want to use some USB device that is also recognised by the Apple FTDI serial driver, you can first unload the driver:
sudo kextunload -b com.apple.driver.AppleUSBFTDI
After that you can use it through libusb normally.
For other devices that are recognised as serial devices, you probably need to unload some other driver.
来源：https://stackoverflow.com/questions/20253350/unable-to-claim-usb-interface-with-c-libusb-on-mac-os-x