C - Writing structs to a file (.pcap)

Question

I am trying to write a .pcap file, which is something that can be used in Wireshark. In order to do that, I have a couple of structs with various data types I need to write to a file. (see code)

So, I create the struct instances, fill in the data, use FILE* fp = fopen("test.pcap","w"), and then I'm unsure how to properly write it to the file. I believe I should use memcpy but I'm not sure of the best way to do it. I have mostly resorted to C++ libraries in the past to do this. Any suggestions?

typedef struct pcap_hdr_s {
        uint32_t magic_number;   /* magic number */
        uint16_t version_major;  /* major version number */
        uint16_t version_minor;  /* minor version number */
        int32_t  thiszone;       /* GMT to local correction */
        uint32_t sigfigs;        /* accuracy of timestamps */
        uint32_t snaplen;        /* max length of captured packets, in octets */
        uint32_t network;        /* data link type */
} pcap_hdr_t;

typedef struct pcaprec_hdr_s {
   uint32_t ts_sec;         /* timestamp seconds */
   uint32_t ts_usec;        /* timestamp microseconds */
   uint32_t incl_len;       /* number of octets of packet saved in file */
   uint32_t orig_len;       /* actual length of packet */
} pcaprec_hdr_t;

typedef struct ethernet_hdr_s {
   uint8_t dst[6];    /* destination host address */
   uint8_t src[6];    /* source host address */
   uint16_t type;     /* IP? ARP? RARP? etc */
} ethernet_hdr_t;

typedef struct ip_hdr_s {
   uint8_t  ip_hl:4, /* both fields are 4 bits */
            ip_v:4;
   uint8_t        ip_tos;
   uint16_t       ip_len;
   uint16_t       ip_id;
   uint16_t       ip_off;
   uint8_t        ip_ttl;
   uint8_t        ip_p;
   uint16_t       ip_sum;
   uint32_t ip_src;
   uint32_t ip_dst;
}ip_hdr_t;

typedef struct udp_header
{
  uint16_t src;
  uint16_t dst;
  uint16_t length;
  uint16_t checksum;
} udp_header_t;

Answer 1

Use fwrite(). You need to check this info but I think .pcap files are written in binary mode.

Example:

pcaprec_hdr_t pcaprec_hdr;
// fill pcaprec_hdr with valid info

FILE* pFile = NULL;
pFile = fopen ("myfile.pcap" , "wb"); // open for writing in binary mode

fwrite (&pcaprec_hdr, 1, sizeof(pcaprec_hdr_t) , pFile);

fclose(pFile);

Answer 2

Use libpcap or WinPcap - pcap_open_dead() to get a "fake" pcap_t to use with pcap_dump_open() to specify the link-layer header type (for Ethernet, use DLT_EN10MB) and snapshot length (use 65535), pcap_dump_open() to open the file for writing, pcap_dump() to write out a packet, and pcap_dump_close() to close the file. MUCH easier than directly using fopen(), fwrite(), and fclose() (which are what libpcap/WinPcap use "under the hood").

And, yes, you have to get the byte order in the packets correct. The byte order depends on the protocol; for the type field in the Ethernet header, and for all multi-byte fields in IP, TCP, and UDP headers, they have to be in big-endian order. (The magic number in the pcap file is irrelevant to this - it only indicates the byte order of the fields in the file header and the per-packet record header, NOT the byte order of the fields in the packet, as well as, due to the way it's implemented in Linux, the meta-data at the beginning of packets in Linux USB captures. The packet data is supposed to look exactly as it would "on the wire".)

Answer 3

Here's my understanding of what Guy Harris is suggesting. So, as per Kyslik's request, we have:

#include <libpcap/pcap.h>

/* Ethernet/IP/SCTP INIT chunk */
static const unsigned char pkt1[82] = {
  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ........ */
  0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x45, 0x00, /* ......E. */
  0x00, 0x44, 0x55, 0xb1, 0x00, 0x00, 0x40, 0x84, /* .DU...@. */
  0x26, 0x83, 0x7f, 0x00, 0x00, 0x01, 0x7f, 0x00, /* &....... */
  0x00, 0x01, 0x00, 0x01, 0x1f, 0x90, 0x00, 0x00, /* ........ */
  0x00, 0x00, 0x68, 0xe5, 0x88, 0x1b, 0x01, 0x00, /* ..h..... */
  0x00, 0x24, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0f, /* .$...... */
  0xa0, 0x00, 0x00, 0x04, 0xff, 0xff, 0x00, 0x00, /* ........ */
  0x16, 0x2e, 0x80, 0x00, 0x00, 0x04, 0xc0, 0x00, /* ........ */
  0x00, 0x04, 0x00, 0x0c, 0x00, 0x06, 0x00, 0x05, /* ........ */
  0x00, 0x00                                      /* .. */
};


int main(int argc, char *argv[]) {

  pcap_t *handle = pcap_open_dead(DLT_EN10MB, 1 << 16);
  pcap_dumper_t *dumper = pcap_dump_open(handle, "/tmp/pktcap/cap.pcap");

  struct pcap_pkthdr pcap_hdr;
  pcap_hdr.caplen = sizeof(pkt1);
  pcap_hdr.len = pcap_hdr.caplen;

  pcap_dump((u_char *)dumper, &pcap_hdr, pkt1);
  pcap_dump_close(dumper);

  return 0;
}