Counting the squama of lizards

问题

A biologist friend of mine asked me if I could help him make a program to count the squama (is this the right translation?) of lizards.

He sent me some images and I tried some things on Matlab. For some images it's much harder than other, for example when there are darker(black) regions. At least with my method. I'm sure I can get some useful help here. How should I improve this? Have I taken the right approach?

These are some of the images.

I got the best results by following Image Processing and Counting using MATLAB. It's basically turning the image into Black and white and then threshold it. But I did add a bit of erosion.

Here's the code:

img0=imread('C:...\pic.png');

img1=rgb2gray(img0);

%The output image BW replaces all pixels in the input image with luminance greater than level with the value 1 (white) and replaces all other pixels with the value 0 (black). Specify level in the range [0,1]. 
img2=im2bw(img1,0.65);%(img1,graythresh(img1));

imshow(img2)
figure;

 %erode
 se = strel('line',6,0);     
 img2 = imerode(img2,se);
 se = strel('line',6,90);   
 img2 = imerode(img2,se);
 imshow(img2)
figure;

imshow(img1, 'InitialMag', 'fit')

% Make a truecolor all-green image. I use this later to overlay it on top of the original image to show which elements were counted (with green)
 green = cat(3, zeros(size(img1)),ones(size(img1)), zeros(size(img1)));
 hold on
 h = imshow(green); 
 hold off


%counts the elements now defined by black spots on the image
[B,L,N,A] = bwboundaries(img2);
%imshow(img2); hold on;
set(h, 'AlphaData', img2)
text(10,10,strcat('\color{green}Objects Found:',num2str(length(B))))
figure;



%this produces a new image showing each counted element and its count id on top of it.
imshow(img2); hold on;
colors=['b' 'g' 'r' 'c' 'm' 'y'];
for k=1:length(B),
     boundary = B{k};
     cidx = mod(k,length(colors))+1;
     plot(boundary(:,2), boundary(:,1), colors(cidx),'LineWidth',2);
     %randomize text position for better visibility
     rndRow = ceil(length(boundary)/(mod(rand*k,7)+1));
     col = boundary(rndRow,2); row = boundary(rndRow,1);
     h = text(col+1, row-1, num2str(L(row,col)));
     set(h,'Color',colors(cidx),'FontSize',14,'FontWeight','bold');
end
figure; 
spy(A);

And these are some of the results. One the top-left corner you can see how many were counted.

Also, I think it's useful to have the counted elements marked in green so at least the user can know which ones have to be counted manually.

回答1:

There is one route you should consider: watershed segmentation. Here is a quick and dirty example with your first image (it assumes you have the IP toolbox):

raw=rgb2gray(imread('lCeL8.jpg'));

Icomp = imcomplement(raw);
I3 = imhmin(Icomp,20);
L = watershed(I3);
%%
imagesc(L);
axis image

Result shown with a colormap:

You can then count the cells as follows:

count = numel(unique(L));

One of the advantages is that it can be directly fed to regionprops and give you all the nice details about the individual 'squama':

r=regionprops(L, 'All');
imshow(raw);

for k=2:numel(r)
    if r(k).Area>100 % I chose 100 to filter out the objects with a small are.
        rectangle('Position',r(k).BoundingBox, 'LineWidth',1, 'EdgeColor','b', 'Curvature', [1 1]); 
    end
end

Which you could use to monitor over/under segmentation: