Is there a way to determine that SMM interrupt has occured?

安稳与你 提交于 2019-12-24 17:09:30

问题


Is there a way to determine, for some progamatically defined interval, if a SMM entry has occurred on the current core?


回答1:


Starting with Nehalem, the MSR register 0x34 (called MSR_SMI_COUNT) counts the number of SMIs that occurred since the system was booted. It's read-only and Intel-specific. You can programmability read from this register (or any other MSR register) from user mode using the /dev/cpu/CPUNUM/msr interface. There are several tools that use the interface to show the SMI count including msr-tools (sudo rdmsr -a 0x34) and turbostat (sudo turbostat --msr 0x34).

I've extracted this code from the turbostat source code (/source/tools/power/x86/turbostat/turbostat.c). The get_msr_fd function returns the file descriptor of the msr file. The get_msr function accepts the CPU number, the MSR offset (0x34 for MSR_SMI_COUNT), and a pointer to a 64-bit location that will hold the value of the MSR (although MSR_SMI_COUNT is a 32-bit counter and the upper 32 bits are reserved).

int get_msr_fd(int cpu)
{
    char pathname[32];
    int fd;

    fd = fd_percpu[cpu];

    if (fd)
        return fd;

    sprintf(pathname, "/dev/cpu/%d/msr", cpu);
    fd = open(pathname, O_RDONLY);
    if (fd < 0)
        err(-1, "%s open failed, try chown or chmod +r /dev/cpu/*/msr, or run as root", pathname);

    fd_percpu[cpu] = fd;

    return fd;
}

int get_msr(int cpu, off_t offset, unsigned long long *msr)
{
    ssize_t retval;

    retval = pread(get_msr_fd(cpu), msr, sizeof(*msr), offset);

    if (retval != sizeof *msr)
        err(-1, "cpu%d: msr offset 0x%llx read failed", cpu, (unsigned long long)offset);

    return 0;
}

An SMI may occur multiple times per second or may not occur for a long period of time. But one way to observe a change in MSR_SMI_COUNT is by issuing a synchronous SMI. Typically, this can be done by writing some 8-bit value to I/O port 0xB2 or 0xB3. You can refer to your chipset manual to determine which I/O ports may trigger an SMI.



来源:https://stackoverflow.com/questions/50790715/is-there-a-way-to-determine-that-smm-interrupt-has-occured

标签
易学教程内所有资源均来自网络或用户发布的内容,如有违反法律规定的内容欢迎反馈
该文章没有解决你所遇到的问题?点击提问,说说你的问题,让更多的人一起探讨吧!