问题
I am trying to get some code to run on the GPU using OpenMP, but I am not succeeding. In my code, I am performing a matrix multiplication using for loops: once using OpenMP pragma tags and once without. (This is so that I can compare the execution time.) After the first loop I call omp_get_num_devices() (this is my main test to see if I'm actually connecting to a GPU.) No matter what I try, omp_get_num_devices() always returns 0.
The computer I am using has two NVIDIA Tesla K40M GPUs. CUDA 7.0 and CUDA 7.5 are available on the computer as modules, and the CUDA 7.5 module is typically active. gcc 4.9.3, 5.1.0, and 7.1.0 are all available as modules, with gcc 7.1.0 module typically active. I am compiling my code with $ g++ -fopenmp -omptargets=nvptx64sm_35-nvidia-linux ParallelExperimenting.cpp -o ParallelExperimenting. I've had OpenMP code successfully parallelized using the CPU, but not with GPUs.
My main goal here is to get omp_get_num_devices() to return 2 as proof that I can detect and use the GPUs with OpenMP. Any help I recieve here would be greatly appreciated.
Here is the code I am using to check if the GPU is being used correctly or not:
#include <omp.h>
#include <fstream>
#include <stdio.h>
#include <math.h>
#include <stdlib.h>
#include <time.h>
#include <iomanip>
#include <cstdio>
#include <stdlib.h>
#include <iostream>
#include <time.h>
using namespace std;
double A [501][501];
double B [501][501];
double C [501][501][501];
double D [501][501];
double E [501][501];
double F [501][501][501];
double dummyvar;
int Mapped [501];
int main() {
int i, j, k, l, N, StallerGPU, StallerCPU;
//
N = 500;
// Variables merely uses to make the execution take longer and to
// exaggurate the difference in performance between first and second
// calculation
StallerGPU = 200;
StallerCPU = 200;
std::cout << " N = " << N << "\n";
// generate matrix to be used in first calculation
for (i=0; i<N; i++) {
for (k=0; k<N; k++) {
if (i == k) {
A[i][k] = i+1;
} else {
A[i][k] = i * k / N;
}
}
}
// generate other matrix to be used for the first calculation
for (k=0; k<N; k++) {
for (j=0; j<N; j++) {
B[k][j] = 2*(N-1)-k-j;
}
}
// Slightly adjusted matrices for second calculation
for (i=0; i<N; i++) {
for (k=0; k<N; k++) {
if (i == k) {
D[i][k] = i+2;
} else {
D[i][k] = i * k / N - 1;
}
}
}
for (k=0; k<N; k++) {
for (j=0; j<N; j++) {
E[k][j] = 2*(N+1)-k-j;
}
}
dummyvar = 0;
//Run the multiplication in parallel using GPUs
double diff;
time_t time1;
time1 = time( NULL ); // CPU time counter
cout << endl << " GPU section begins at " << ctime(&time1) << endl;
// This pragma is frequently changed to try different tags
#pragma omp for collapse(4) private(i, j, k, l)
for (i=0; i<N; i++) {
// Mapped[i] = omp_is_initial_device();
for (j=0; j<N; j++) {
for (k=0; k<N; k++) {
for(l = 0; l < StallerGPU; l++ ) {
C[i][j][k] = A[i][k] * B[k][j] ;
dummyvar += A[i][k] * B[k][j] * (l + 1);
}
}
// cout << " i " << i << endl;
}
}
//record the time it took to run the multiplication
time_t time2 = time( NULL );
cout << " number of devices: " << omp_get_num_devices() << endl;
cout << " dummy variable: " << dummyvar << endl;
float cpumin = difftime(time2,time1);
diff = difftime(time2,time1);
cout << " stopping at delta GPU time: " << cpumin << endl;
cout << " terminating at " << ctime(&time2) << endl;
cout << " GPU time elasped " << diff << " s" << endl;
cout << endl;
dummyvar = 0;
time_t time3 = time( NULL );
cout << endl << " CPU section begins at " << ctime(&time3) << endl;
// #pragma omp single
for (i=0; i<N; i++) {
for (j=0; j<N; j++) {
for (k=0; k<N; k++) {
for (int l=0; l<StallerCPU; l++) {
F[i][j][k] = D[i][k] * E[k][j];
dummyvar += D[i][k] * E[k][j] * (l - 1);
}
}
}
}
// the sum to complete the matrix calculation is left out here, but would
// only be used to check if the result of the calculation is correct
time_t time4 = time( NULL );
cpumin = difftime(time4,time3);
diff = difftime(time4,time3);
cout << " dummy variable: " << dummyvar << endl;
cout << " stopping at delta CPU time: " << cpumin << endl;
cout << " terminating at " << ctime(&time4) << endl;
cout << " CPU time elasped " << diff << " s" << endl;
//Compare the time it took to confirm that we actually used GPUs to parallelize.
}
Here is the result of running the deviceQuery sample CUDA code.
./deviceQuery Starting...
CUDA Device Query (Runtime API) version (CUDART static linking)
Detected 2 CUDA Capable device(s)
Device 0: "Tesla K40m"
CUDA Driver Version / Runtime Version 7.5 / 7.5
CUDA Capability Major/Minor version number: 3.5
Total amount of global memory: 11520 MBytes (12079136768 bytes)
(15) Multiprocessors, (192) CUDA Cores/MP: 2880 CUDA Cores
GPU Max Clock rate: 745 MHz (0.75 GHz)
Memory Clock rate: 3004 Mhz
Memory Bus Width: 384-bit
L2 Cache Size: 1572864 bytes
Maximum Texture Dimension Size (x,y,z) 1D=(65536), 2D=(65536, 65536), 3D=(4096, 4096, 4096)
Maximum Layered 1D Texture Size, (num) layers 1D=(16384), 2048 layers
Maximum Layered 2D Texture Size, (num) layers 2D=(16384, 16384), 2048 layers
Total amount of constant memory: 65536 bytes
Total amount of shared memory per block: 49152 bytes
Total number of registers available per block: 65536
Warp size: 32
Maximum number of threads per multiprocessor: 2048
Maximum number of threads per block: 1024
Max dimension size of a thread block (x,y,z): (1024, 1024, 64)
Max dimension size of a grid size (x,y,z): (2147483647, 65535, 65535)
Maximum memory pitch: 2147483647 bytes
Texture alignment: 512 bytes
Concurrent copy and kernel execution: Yes with 2 copy engine(s)
Run time limit on kernels: No
Integrated GPU sharing Host Memory: No
Support host page-locked memory mapping: Yes
Alignment requirement for Surfaces: Yes
Device has ECC support: Enabled
Device supports Unified Addressing (UVA): Yes
Device PCI Domain ID / Bus ID / location ID: 0 / 130 / 0
Compute Mode:
< Default (multiple host threads can use ::cudaSetDevice() with device simultaneously) >
Device 1: "Tesla K40m"
CUDA Driver Version / Runtime Version 7.5 / 7.5
CUDA Capability Major/Minor version number: 3.5
Total amount of global memory: 11520 MBytes (12079136768 bytes)
(15) Multiprocessors, (192) CUDA Cores/MP: 2880 CUDA Cores
GPU Max Clock rate: 745 MHz (0.75 GHz)
Memory Clock rate: 3004 Mhz
Memory Bus Width: 384-bit
L2 Cache Size: 1572864 bytes
Maximum Texture Dimension Size (x,y,z) 1D=(65536), 2D=(65536, 65536), 3D=(4096, 4096, 4096)
Maximum Layered 1D Texture Size, (num) layers 1D=(16384), 2048 layers
Maximum Layered 2D Texture Size, (num) layers 2D=(16384, 16384), 2048 layers
Total amount of constant memory: 65536 bytes
Total amount of shared memory per block: 49152 bytes
Total number of registers available per block: 65536
Warp size: 32
Maximum number of threads per multiprocessor: 2048
Maximum number of threads per block: 1024
Max dimension size of a thread block (x,y,z): (1024, 1024, 64)
Max dimension size of a grid size (x,y,z): (2147483647, 65535, 65535)
Maximum memory pitch: 2147483647 bytes
Texture alignment: 512 bytes
Concurrent copy and kernel execution: Yes with 2 copy engine(s)
Run time limit on kernels: No
Integrated GPU sharing Host Memory: No
Support host page-locked memory mapping: Yes
Alignment requirement for Surfaces: Yes
Device has ECC support: Enabled
Device supports Unified Addressing (UVA): Yes
Device PCI Domain ID / Bus ID / location ID: 0 / 131 / 0
Compute Mode:
< Default (multiple host threads can use ::cudaSetDevice() with device simultaneously) >
> Peer access from Tesla K40m (GPU0) -> Tesla K40m (GPU1) : Yes
> Peer access from Tesla K40m (GPU1) -> Tesla K40m (GPU0) : Yes
deviceQuery, CUDA Driver = CUDART, CUDA Driver Version = 7.5, CUDA Runtime Version = 7.5, NumDevs = 2, Device0 = Tesla K40m, Device1 = Tesla K40m
Result = PASS
回答1:
GCC 4.9.3 and 5.1.0 definitely do not support OpenMP offloading to GPU. GCC 7.1.0 does support it, however it should be built with special configure options, as described here.
回答2:
I may be wrong, but I think you need a few corrections to the code as posted (maybe you already know it). To actually run on the GPU target with OpenMP you need to replace:
#pragma omp for collapse(4) private(i, j, k, l)
with
#pragma omp target teams distribute parallel for collapse(4) private(i, j, k, l)
You can verify if the kernel is actually running on the GPU by profiling your executable with 'nvprof'. It should show a kernel executing on the GPU. You can also change the number of teams and threads in your target region using the 'num_teams' and 'thread_limit' clauses and you should see corresponding changes in your profile.
To actually check programmatically if a target region is running on a target device I use the 'omp_is_initial_device()' call, which returns 0 when called from the accelerator. Here's an example:
int A[1] = {-1};
#pragma omp target
{
A[0] = omp_is_initial_device();
}
if (!A[0]) {
printf("Able to use offloading!\n");
}
回答3:
Maybe I'm in a wrong direction. but I want to help,
since I've ever in a weird situation using GPU.
You need to be in the "video" group of linux, so you can using GPU.
or all the results returned from GPU will be 0.
So I would advise you run a sample CUDA code to check if you are in the situation I used to be stuck.
It's weird. I'm not sure I describe it properly. hope it helps.
according to this: https://wiki.gentoo.org/wiki/NVidia/nvidia-drivers
The user(s) needing to access the video card will need to be added to the video group
来源：https://stackoverflow.com/questions/44685568/how-do-i-use-the-gpu-available-with-openmp