How to write/read to FLASH on STM32F4, Cortex M4

末鹿安然 提交于 2019-12-17 16:23:52

问题


I want to write a variable, for example an integer with the number 5 to the FLASH and then after the power goes away and the device is turned on again read it.

I already know that in order to write something I first need to erase the page and then write.

In the manual it says:

  1. Write OPTKEY1 = 0x0819 2A3B in the Flash option key register (FLASH_OPTKEYR)
  2. Write OPTKEY2 = 0x4C5D 6E7F in the Flash option key register (FLASH_OPTKEYR)

How do I perform this tasks?

Sector 0 has a Block adress from 0x0800 0000 to 0x0800 3FFF, this is where I want to write.

Here the link to the manual, page 71: STM32 Manual


回答1:


You can use following code for write data to flash with HAL library.

void Write_Flash(uint8_t data)
{
     HAL_FLASH_Unlock();
     __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP | FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | FLASH_FLAG_PGAERR | FLASH_FLAG_PGSERR );
     FLASH_Erase_Sector(FLASH_SECTOR_6, VOLTAGE_RANGE_3);
     HAL_FLASH_Program(TYPEPROGRAM_WORD, FlashAddress, data);
     HAL_FLASH_Lock();
}

You should update linker script as follows. Add DATA in MEMORY and add .user_data in SECTIONS.

MEMORY
{
RAM (xrw)      : ORIGIN = 0x20000000, LENGTH = 320K
CCMRAM (rw)      : ORIGIN = 0x10000000, LENGTH = 64K
FLASH (rx)      : ORIGIN = 0x8000000, LENGTH = 2048K
DATA (rwx)      : ORIGIN = 0x08040000, LENGTH = 128k
}

/* Define output sections */
SECTIONS
{
 .user_data :
  {
    . = ALIGN(4);
     KEEP(*(.user_data))
    . = ALIGN(4);
  } > DATA

You should add following attribute on main code for reading data after power on

__attribute__((__section__(".user_data"))) const char userConfig[64];

After all these, you can read your flash data with calling userConfig[0].



来源:https://stackoverflow.com/questions/44443619/how-to-write-read-to-flash-on-stm32f4-cortex-m4

易学教程内所有资源均来自网络或用户发布的内容,如有违反法律规定的内容欢迎反馈
该文章没有解决你所遇到的问题?点击提问,说说你的问题,让更多的人一起探讨吧!