问题
I have trouble understanding the implementation of a monitor in terms of semaphores from Operating System Concepts
5.8.3 Implementing a Monitor Using Semaphores
We now consider a possible implementation of the monitor mechanism using semaphores.
For each monitor, a semaphore mutex (initialized to 1) is provided. A process must execute wait(mutex) before entering the monitor and must execute signal(mutex) after leaving the monitor.
Since a signaling process must wait until the resumed process either leaves or waits, an additional semaphore,
next, is introduced, initialized to 0. The signaling processes can usenextto suspend themselves. An integer variablenext_countis also provided to count the number of processes suspended onnext. Thus, each external functionFis replaced bywait(mutex); ... body of F ... if (next count > 0) signal(next); else signal(mutex);Mutual exclusion within a monitor is ensured.
We can now describe how condition variables are implemented as well. For each condition
x, we introduce a semaphorex_semand an integer variablex_count, both initialized to 0. The operationx.wait()can now be implemented asx_count++; if (next_count > 0) signal(next); else signal(mutex); wait(x sem); x_count--;The operation
x.signal()can be implemented asif (x_count > 0) { next_count++; signal(x_sem); wait(next); next_count--; }
What does the reason for introducing semaphore next and the count next_count of processes suspended on next mean?
Why are x.wait() and x.signal() implemented the way they are?
Thanks.
回答1:
------- Note -------
WAIT() and SIGNAL() denote calls on monitor methods
wait() and signal() denote calls to semaphore methods, in the explanation that follows.
------- End of Note -------
I think it is easier if you think in terms of a concrete example. But before that let's first try to understand what a monitor is. As explained in the book a monitor is a Abstract Data Type meaning that it is not a real type which can be used to instantiate a variable. Rather it is like a specification with some rules and guidelines based on which different languages could provide support for process synchronization.
Semaphors were introduced as a software-based solution for achieving synchronization over hardware-based approaches like TestAndSet() or Swap(). Even with semaphores, the programmers had to ensure that they invoke the wait() & signal() methods in the right order and correctly. So, an abstract specification called monitors were introduced to encapsulate all these things related to synchronization as one primitive so simply any process executing inside the monitor will ensure that these methods (semaphore wait and signal) invocations are used accordingly.
With monitors all shared variables and functions (that use the shared variables) are put into the monitor structure and when any of these functions are invoked the monitor implementation takes care of ensuring that the shared resources are protected over mutual exclusion and any issues of synchronization.
Now with monitors unlike semaphores or other synchronization techniques we are not dealing with just one portion of the critical section but many of them in terms of different functions. In addition, we do also have shared variables that are accessed within these functions. For each of the different functions in a monitor to ensure only one of them is executed and no other process is executing on any of the functions, we can use a global semaphore called mutex.
Consider the example of the solution for the dining philosophers problem using monitors below.
monitor dining_philopher
{
enum {THINKING, HUNGRY, EATING} state[5];
condition self[5];
void pickup(int i) {
state[i] = HUNGRY;
test(i);
if (state[i] != EATING)
self[i].WAIT();
}
void putdown(int i) {
state[i] = THINKING;
test((i + 4) % 5);
test((i + 1) % 5);
}
void test(int i) {
if (
(state[(i + 4) % 5] != EATING) &&
(state[i] == HUNGRY) &&
(state[(i + 1) % 5] != EATING))
{
state[i] = EATING;
self[i].SIGNAL();
}
}
initialization code() {
for (int i = 0; i < 5; i++)
state[i] = THINKING;
}
}
}
Ideally, how a process might invoke these functions would be in the following sequence:
DiningPhilosophers.pickup(i);
...
// do somework
...
DiningPhilosophers.putdown(i);
Now, whilst one process is executing inside the pickup() method another might try to invoke putdown() (or even the pickup) method. In order to ensure mutual exclusion we must ensure only one process is running inside the monitor at any given time. So, to handle these cases we have a global semaphore mutex that encapsulates all the invokable (pickup & putdown) methods. So these two methods will be implemented as follows:
void pickup(int i) {
// wait(mutex);
state[i] = HUNGRY;
test(i);
if (state[i] != EATING)
self[i].WAIT();
// signal(mutex);
}
void putdown(int i) {
// wait(mutex);
state[i] = THINKING;
test((i + 4) % 5);
test((i + 1) % 5);
// signal(mutex);
}
Now only one process will be able to execute inside the monitor in any of its methods. Now, with this setup, if Process P1 has executed pickup() (but is yet tp putdown the chopsticks) and then Process P2 (say an adjacent diner) tries to pickup(): since his/her chopsticks (shared resource) is in use, it has to wait() for it to be available. Let's look at the WAIT and SIGNAL implementation of the monitor's conditional variables:
WAIT(){
x_count++;
if (next_count > 0)
signal(next);
else
signal(mutex);
wait(x_sem);
x_count--;
}
SIGNAL() {
if (x_count > 0) {
next_count++;
signal(x_sem);
wait(next);
next_count--;
}
}
The WAIT implementation of the conditional variables is different from that of the Semaphore's because it has to provide more functionality, like allowing other processes to invoke functions of the monitor (whilst it waits) by releasing the mutex global semaphore. So, when WAIT is invoked by P2 from the pickup() method, it will call signal(mutex) allowing other processes to invoke the monitor methods and call wait(x_sem) on the semaphore specific to the conditional. Now, P2 is blocked here. In addition, the variable x_count keeps track of the number of Processes waiting on the conditional variable (self).
So when P1 invokes putdown(), this will invoke SIGNAL via the test() method. Inside SIGNAL when P1 invokes signal(x_sem) on the chopstick it holds, it must do one additional thing. It must ensure that only one process is running inside the monitor. If it would only call signal(x_sem) then from that point onwards P1 and P2 both would start doing things inside the monitor. To prevent this P1, after releasing its chopstick it will block itself until P2 finishes. To block itself, it uses the semaphore next. And to notify P2 or some other process that there is someone blocked it uses a counter next_count.
So, now P2 would get the chopsticks and before it exits the pickup() method it must release P1 who is waiting on P2 to finish. So now, we must change the pickup() method (and all functions of the monitor) as follows:
void pickup(int i) {
// wait(mutex);
state[i] = HUNGRY;
test(i);
if (state[i] != EATING)
self[i].WAIT();
/**************
if (next_count > 0)
signal(next);
else
signal(mutex);
**************/
}
void putdown(int i) {
// wait(mutex);
state[i] = THINKING;
test((i + 4) % 5);
test((i + 1) % 5);
/**************
if (next_count > 0)
signal(next);
else
signal(mutex);
**************/
}
So now, before any process exits a function of the monitor, it checks if there are any waiting processes and if so releases them and not the mutex global semaphore. And the last of such waiting processes will release the mutex semaphore allowing new processes to enter into the monitor functions.
I know it's pretty long, but it took some time for me to understand and wanted to put it in writing. I will post it on a blog soon.
If there are any mistakes please let me know.
Best,
Shabir
回答2:
I agree its confusing.
Lets first understand the first piece of code:
// if you are the only process on the queue just take the monitor and invoke the function F.
wait(mutex);
...
body of F
...
if (next_count > 0)
// if some process already waiting to take the monitor you signal the "next" semaphore and let it take the monitor.
signal(next);
else
// otherwise you signal the "mutex" semaphore so if some process requested the monitor later.
signal(mutex);
back to your questions:
What does the reason for introducing semaphore next and the count next_count of processes suspended on next mean?
imagine you have a process that is doing some I/O and it needs to be blocked until it finishes. so you let other processes waiting in the ready queue to take the monitor and invoke the function F.
next_count is only for the purpose to keep track of processes waiting in the queue.
a process suspended on next semaphore is the process who issued wait on condition variable so it will be suspended until some other process (next process) wake it up and resume work.
Why are x.wait() and x.signal() implemented the way they are?
Lets take the x.wait():
semaphore x_sem; // (initially = 0)
int x_count = 0; // number of process waiting on condition (x)
/*
* This is used to indicate that some process is issuing a wait on the
* condition x, so in case some process has sent a signal x.signal()
* without no process is waiting on condition x the signal will be lost signal (has no effect).
*/
x_count++;
/*
* if there is some process waiting on the ready queue,
* signal(next) will increase the semaphore internal counter so other processes can take the monitor.
*/
if (next_count > 0)
signal(next);
/*
* Otherwise, no process is waiting.
* signal(mutex) will release the mutex.
*/
else
signal(mutex);
/*
* now the process that called x.wait() will be blocked until other process will release (signal) the
* x_sem semaphore: signal(x_sem)
*/
wait(x_sem);
// process is back from blocking.
// we are done, decrease x_count.
x_count--;
Now lets take the x.signal():
// if there are processes waiting on condition x.
if (x_count > 0) {
// increase the next count as new blocked process has entered the queue (the one who called x.wait()). remember (wait(x_sem))
next_count++;
// release x_sem so the process waiting on x condition resume.
signal(x_sem);
// wait until next process is done.
wait(next);
// we are done.
next_count--;
}
Comment if you have any questions.
来源：https://stackoverflow.com/questions/46919797/why-is-a-monitor-implemented-in-terms-of-semaphores-this-way