问题
Can someone please explain the Differential Evolution method? The Wikipedia definition is extremely technical.
A dumbed-down explanation followed by a simple example would be appreciated :)
回答1:
Here's a simplified description. DE is an optimisation technique which iteratively modifies a population of candidate solutions to make it converge to an optimum of your function.
You first initialise your candidate solutions randomly. Then at each iteration and for each candidate solution x you do the following:
- you produce a trial vector: v = a + ( b - c ) / 2, where a, b, c are three distinct candidate solutions picked randomly among your population.
- you randomly swap vector components between x and v to produce v'. At least one component from v must be swapped.
- you replace x in your population with v' only if it is a better candidate (i.e. it better optimise your function).
(Note that the above algorithm is very simplified; don't code from it, find proper spec. elsewhere instead)
Unfortunately the Wikipedia article lacks illustrations. It is easier to understand with a graphical representation, you'll find some in these slides: http://www-personal.une.edu.au/~jvanderw/DE_1.pdf .
It is similar to genetic algorithm (GA) except that the candidate solutions are not considered as binary strings (chromosome) but (usually) as real vectors. One key aspect of DE is that the mutation step size (see step 1 for the mutation) is dynamic, that is, it adapts to the configuration of your population and will tend to zero when it converges. This makes DE less vulnerable to genetic drift than GA.
回答2:
Answering my own question...
Overview
- The principal difference between Genetic Algorithms and Differential Evolution (DE) is that Genetic Algorithms rely on crossover while evolutionary strategies use mutation as the primary search mechanism.
- DE generates new candidates by adding a weighted difference between two population members to a third member (more on this below).
- If the resulting candidate is superior to the candidate with which it was compared, it replaces it; otherwise, the original candidate remains unchanged.
Definitions
- The population is made up of
NPcandidates. Xi= A parent candidate at indexi(indexes range from0toNP-1) from the current generation. Also known as the target vector.- Each candidate contains
Dparameters. Xi(j)= The jth parameter in candidateXi.Xa,Xb,Xc= three random parent candidates.- Difference vector =
(Xb - Xa) F= A weight that determines the rate of the population's evolution.- Ideal values: [0.5, 1.0]
CR= The probability of crossover taking place.- Range: [0, 1]
Xc`= A mutant vector obtained through the differential mutation operation. Also known as the donor vector.Xt= The child ofXiandXc`. Also known as the trial vector.
Algorithm
- For each candidate in the population
for (int i = 0; i<NP; ++i)
- Choose three distinct parents at random (they must differ from each other and
i)
do
{
a = random.nextInt(NP);
} while (a == i)
do
{
b = random.nextInt(NP);
} while (b == i || b == a);
do
{
c = random.nextInt(NP);
} while (c == i || c == b || c == a);
- (Mutation step) Add a weighted difference vector between two population members to a third member
Xc` = Xc + F * (Xb - Xa)
- (Crossover step) For every variable in
Xi, apply uniform crossover with probabilityCRto inherit fromXc`; otherwise, inherit fromXi. At least one variable must be inherited fromXc`
int R = random.nextInt(D);
for (int j=0; j < D; ++j)
{
double probability = random.nextDouble();
if (probability < CR || j == R)
Xt[j] = Xc`[j]
else
Xt[j] = Xi[j]
}
- (Selection step) If
Xtis superior toXithenXtreplacesXiin the next generation. Otherwise,Xiis kept unmodified.
Resources
- See this for an overview of the terminology
- See Optimization Using Differential Evolution by Vasan Arunachalam for an explanation of the Differential Evolution algorithm
- See Evolution: A Survey of the State-of-the-Art by Swagatam Das and Ponnuthurai Nagaratnam Suganthan for different variants of the Differential Evolution algorithm
- See Differential Evolution Optimization from Scratch with Python for a detailed description of an implementation of a DE algorithm in python.
回答3:
The working of DE algorithm is very simple. Consider you need to optimize(minimize,for eg) ∑Xi^2 (sphere model) within a given range, say [-100,100]. We know that the minimum value is 0. Let's see how DE works.
DE is a population-based algorithm. And for each individual in the population, a fixed number of chromosomes will be there (imagine it as a set of human beings and chromosomes or genes in each of them). Let me explain DE w.r.t above function
We need to fix the population size and the number of chromosomes or genes(named as parameters). For instance, let's consider a population of size 4 and each of the individual has 3 chromosomes(or genes or parameters). Let's call the individuals R1,R2,R3,R4.
Step 1 : Initialize the population
We need to randomly initialise the population within the range [-100,100]
G1 G2 G3 objective fn value
R1 -> |-90 | 2 | 1 | =>8105
R2 -> | 7 | 9 | -50 | =>2630
R3 -> | 4 | 2 | -9.2| =>104.64
R4 -> | 8.5 | 7 | 9 | =>202.25
objective function value is calculated using the given objective function.In this case, it's ∑Xi^2. So for R1, obj fn value will be -90^2+2^2+2^2 = 8105. Similarly it is found for all.
Step 2 : Mutation
Fix a target vector,say for eg R1 and then randomly select three other vectors(individuals)say for eg.R2,R3,R4 and performs mutation. Mutation is done as follows,
MutantVector = R2 + F(R3-R4)
(vectors can be chosen randomly, need not be in any order).F (scaling factor/mutation constant) within range [0,1] is one among the few control parameters DE is having.In simple words , it describes how different the mutated vector becomes. Let's keep F =0.5.
| 7 | 9 | -50 |
+
0.5 *
| 4 | 2 | -9.2|
+
| 8.5 | 7 | 9 |
Now performing Mutation will give the following Mutant Vector
MV = | 13.25 | 13.5 | -50.1 | =>2867.82
Step 3 : Crossover
Now that we have a target vector(R1) and a mutant vector MV formed from R2,R3 & R4 ,we need to do a crossover. Consider R1 and MV as two parents and we need a child from these two parents. Crossover is done to determine how much information is to be taken from both the parents. It is controlled by Crossover rate(CR). Every gene/chromosome of the child is determined as follows,
a random number between 0 & 1 is generated, if it is greater than CR , then inherit a gene from target(R1) else from mutant(MV).
Let's set CR = 0.9. Since we have 3 chromosomes for individuals, we need to generate 3 random numbers between 0 and 1. Say for eg, those numbers are 0.21,0.97,0.8 respectively. First and last are lesser than CR value, so those positions in the child's vector will be filled by values from MV and second position will be filled by gene taken from target(R1).
Target-> |-90 | 2 | 1 | Mutant-> | 13.25 | 13.5 | -50.1 |
random num - 0.21, => `Child -> |13.25| -- | -- |`
random num - 0.97, => `Child -> |13.25| 2 | -- |`
random num - 0.80, => `Child -> |13.25| 2 | -50.1 |`
Trial vector/child vector -> | 13.25 | 2 | -50.1 | =>2689.57
Step 4 : Selection
Now we have child and target. Compare the obj fn of both, see which is smaller(minimization problem). Select that individual out of the two for next generation
R1 -> |-90 | 2 | 1 | =>8105
Trial vector/child vector -> | 13.25 | 2 | -50.1 | =>2689.57
Clearly, the child is better so replace target(R1) with the child. So the new population will become
G1 G2 G3 objective fn value
R1 -> | 13.25 | 2 | -50.1 | =>2689.57
R2 -> | 7 | 9 | -50 | =>2500
R3 -> | 4 | 2 | -9.2 | =>104.64
R4 -> | -8.5 | 7 | 9 | =>202.25
This procedure will be continued either till the number of generations desired has reached or till we get our desired value. Hope this will give you some help.
来源：https://stackoverflow.com/questions/7493781/explain-the-differential-evolution-method