How to list physical disks in Windows?
In order to obtain a list of "\\\\.\PhysicalDrive0" available.
WMIC
wmic is a very complete tool
wmic diskdrive list
provide a (too much) detailed list, for instance
for less info
wmic diskdrive list brief
C
Sebastian Godelet mentions in the comments:
In C:
system("wmic diskdrive list");
As commented, you can also call the WinAPI, but... as shown in "How to obtain data from WMI using a C Application?", this is quite complex (and generally done with C++, not C).
PowerShell
Or with PowerShell:
Get-WmiObject Win32_DiskDrive
One way to do it:
Enumerate logical drives using
GetLogicalDrivesFor each logical drive, open a file named
"\\.\X:"(without the quotes) where X is the logical drive letter.Call
DeviceIoControlpassing the handle to the file opened in the previous step, and thedwIoControlCodeparameter set toIOCTL_VOLUME_GET_VOLUME_DISK_EXTENTS:HANDLE hHandle; VOLUME_DISK_EXTENTS diskExtents; DWORD dwSize; [...] iRes = DeviceIoControl( hHandle, IOCTL_VOLUME_GET_VOLUME_DISK_EXTENTS, NULL, 0, (LPVOID) &diskExtents, (DWORD) sizeof(diskExtents), (LPDWORD) &dwSize, NULL);
This returns information of the physical location of a logical volume, as a VOLUME_DISK_EXTENTS structure.
In the simple case where the volume resides on a single physical drive, the physical drive number is available in diskExtents.Extents[0].DiskNumber
This might be 5 years too late :). But as I see no answer for this yet, adding this.
We can use Setup APIs to get the list of disks ie., devices in the system implementing GUID_DEVINTERFACE_DISK.
Once we have their device paths, we can issue IOCTL_STORAGE_GET_DEVICE_NUMBER to construct "\\.\PHYSICALDRIVE%d" with STORAGE_DEVICE_NUMBER.DeviceNumber
See also SetupDiGetClassDevs function
#include <Windows.h>
#include <Setupapi.h>
#include <Ntddstor.h>
#pragma comment( lib, "setupapi.lib" )
#include <iostream>
#include <string>
using namespace std;
#define START_ERROR_CHK() \
DWORD error = ERROR_SUCCESS; \
DWORD failedLine; \
string failedApi;
#define CHK( expr, api ) \
if ( !( expr ) ) { \
error = GetLastError( ); \
failedLine = __LINE__; \
failedApi = ( api ); \
goto Error_Exit; \
}
#define END_ERROR_CHK() \
error = ERROR_SUCCESS; \
Error_Exit: \
if ( ERROR_SUCCESS != error ) { \
cout << failedApi << " failed at " << failedLine << " : Error Code - " << error << endl; \
}
int main( int argc, char **argv ) {
HDEVINFO diskClassDevices;
GUID diskClassDeviceInterfaceGuid = GUID_DEVINTERFACE_DISK;
SP_DEVICE_INTERFACE_DATA deviceInterfaceData;
PSP_DEVICE_INTERFACE_DETAIL_DATA deviceInterfaceDetailData;
DWORD requiredSize;
DWORD deviceIndex;
HANDLE disk = INVALID_HANDLE_VALUE;
STORAGE_DEVICE_NUMBER diskNumber;
DWORD bytesReturned;
START_ERROR_CHK();
//
// Get the handle to the device information set for installed
// disk class devices. Returns only devices that are currently
// present in the system and have an enabled disk device
// interface.
//
diskClassDevices = SetupDiGetClassDevs( &diskClassDeviceInterfaceGuid,
NULL,
NULL,
DIGCF_PRESENT |
DIGCF_DEVICEINTERFACE );
CHK( INVALID_HANDLE_VALUE != diskClassDevices,
"SetupDiGetClassDevs" );
ZeroMemory( &deviceInterfaceData, sizeof( SP_DEVICE_INTERFACE_DATA ) );
deviceInterfaceData.cbSize = sizeof( SP_DEVICE_INTERFACE_DATA );
deviceIndex = 0;
while ( SetupDiEnumDeviceInterfaces( diskClassDevices,
NULL,
&diskClassDeviceInterfaceGuid,
deviceIndex,
&deviceInterfaceData ) ) {
++deviceIndex;
SetupDiGetDeviceInterfaceDetail( diskClassDevices,
&deviceInterfaceData,
NULL,
0,
&requiredSize,
NULL );
CHK( ERROR_INSUFFICIENT_BUFFER == GetLastError( ),
"SetupDiGetDeviceInterfaceDetail - 1" );
deviceInterfaceDetailData = ( PSP_DEVICE_INTERFACE_DETAIL_DATA ) malloc( requiredSize );
CHK( NULL != deviceInterfaceDetailData,
"malloc" );
ZeroMemory( deviceInterfaceDetailData, requiredSize );
deviceInterfaceDetailData->cbSize = sizeof( SP_DEVICE_INTERFACE_DETAIL_DATA );
CHK( SetupDiGetDeviceInterfaceDetail( diskClassDevices,
&deviceInterfaceData,
deviceInterfaceDetailData,
requiredSize,
NULL,
NULL ),
"SetupDiGetDeviceInterfaceDetail - 2" );
disk = CreateFile( deviceInterfaceDetailData->DevicePath,
GENERIC_READ,
FILE_SHARE_READ | FILE_SHARE_WRITE,
NULL,
OPEN_EXISTING,
FILE_ATTRIBUTE_NORMAL,
NULL );
CHK( INVALID_HANDLE_VALUE != disk,
"CreateFile" );
CHK( DeviceIoControl( disk,
IOCTL_STORAGE_GET_DEVICE_NUMBER,
NULL,
0,
&diskNumber,
sizeof( STORAGE_DEVICE_NUMBER ),
&bytesReturned,
NULL ),
"IOCTL_STORAGE_GET_DEVICE_NUMBER" );
CloseHandle( disk );
disk = INVALID_HANDLE_VALUE;
cout << deviceInterfaceDetailData->DevicePath << endl;
cout << "\\\\?\\PhysicalDrive" << diskNumber.DeviceNumber << endl;
cout << endl;
}
CHK( ERROR_NO_MORE_ITEMS == GetLastError( ),
"SetupDiEnumDeviceInterfaces" );
END_ERROR_CHK();
Exit:
if ( INVALID_HANDLE_VALUE != diskClassDevices ) {
SetupDiDestroyDeviceInfoList( diskClassDevices );
}
if ( INVALID_HANDLE_VALUE != disk ) {
CloseHandle( disk );
}
return error;
}
The answer is far simpler than all the above answers. The physical drive list is actually stored in a Registry key which also gives the device mapping.
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\disk\Enum
Count is the number of PhysicalDrive# and each numbered Registry Value is the corresponding physical drive.
For example, Registry Value "0" is PhysicalDrive0. The value is the actual device PhysicalDrive0 is mapped to. The value contained here can be passed into CM_Locate_DevNode within parameter pDeviceID to use the plug and play services. This will allow you to gather a wealth of information on the device. Such as the properties from Device Manager like "Friendly Display Name" if you need a name for the drive, serial numbers and more.
There is no need for WMI services which may not be running on the system or other hackery and this functionality has been present in Windows since at least 2000 and continues to be the case in Windows 10.
I've modified an open-source program called "dskwipe" in order to pull this disk information out of it. Dskwipe is written in C, and you can pull this function out of it. The binary and source are available here: dskwipe 0.3 has been released
The returned information will look something like this:
Device Name Size Type Partition Type
------------------------------ --------- --------- --------------------
\\.\PhysicalDrive0 40.0 GB Fixed
\\.\PhysicalDrive1 80.0 GB Fixed
\Device\Harddisk0\Partition0 40.0 GB Fixed
\Device\Harddisk0\Partition1 40.0 GB Fixed NTFS
\Device\Harddisk1\Partition0 80.0 GB Fixed
\Device\Harddisk1\Partition1 80.0 GB Fixed NTFS
\\.\C: 80.0 GB Fixed NTFS
\\.\D: 2.1 GB Fixed FAT32
\\.\E: 40.0 GB Fixed NTFS
The only sure shot way to do this is to call CreateFile() on all \\.\Physicaldiskx where x is from 0 to 15 (16 is maximum number of disks allowed). Check the returned handle value. If invalid check GetLastError() for ERROR_FILE_NOT_FOUND. If it returns anything else then the disk exists but you cannot access it for some reason.
GetLogicalDrives() enumerates all mounted disk partitions, not physical drives.
You can enumerate the drive letters with (or without) GetLogicalDrives, then call QueryDosDevice() to find out which physical drive the letter is mapped to.
Alternatively, you can decode the information in the registry at HKEY_LOCAL_MACHINE\SYSTEM\MountedDevices. The binary data encodings there are not obvious, however. If you have a copy of Russinovich and Solomon's book Microsoft Windows Internals, this registry hive is discussed in Chapter 10.
The only correct answer is the one by @Grodriguez, and here's a code that he was too lazy to write:
#include <windows.h>
#include <iostream>
#include <bitset>
#include <vector>
using namespace std;
typedef struct _DISK_EXTENT {
DWORD DiskNumber;
LARGE_INTEGER StartingOffset;
LARGE_INTEGER ExtentLength;
} DISK_EXTENT, *PDISK_EXTENT;
typedef struct _VOLUME_DISK_EXTENTS {
DWORD NumberOfDiskExtents;
DISK_EXTENT Extents[ANYSIZE_ARRAY];
} VOLUME_DISK_EXTENTS, *PVOLUME_DISK_EXTENTS;
#define CTL_CODE(DeviceType, Function, Method, Access) \
(((DeviceType) << 16) | ((Access) << 14) | ((Function) << 2) | (Method))
#define IOCTL_VOLUME_BASE ((DWORD)'V')
#define METHOD_BUFFERED 0
#define FILE_ANY_ACCESS 0x00000000
#define IOCTL_VOLUME_GET_VOLUME_DISK_EXTENTS CTL_CODE(IOCTL_VOLUME_BASE, 0, METHOD_BUFFERED, FILE_ANY_ACCESS)
int main() {
bitset<32> drives(GetLogicalDrives());
vector<char> goodDrives;
for (char c = 'A'; c <= 'Z'; ++c) {
if (drives[c - 'A']) {
if (GetDriveType((c + string(":\\")).c_str()) == DRIVE_FIXED) {
goodDrives.push_back(c);
}
}
}
for (auto & drive : goodDrives) {
string s = string("\\\\.\\") + drive + ":";
HANDLE h = CreateFileA(
s.c_str(), GENERIC_READ, FILE_SHARE_READ | FILE_SHARE_WRITE, NULL,
OPEN_EXISTING, FILE_FLAG_NO_BUFFERING | FILE_FLAG_RANDOM_ACCESS, NULL
);
if (h == INVALID_HANDLE_VALUE) {
cerr << "Drive " << drive << ":\\ cannot be opened";
continue;
}
DWORD bytesReturned;
VOLUME_DISK_EXTENTS vde;
if (!DeviceIoControl(
h, IOCTL_VOLUME_GET_VOLUME_DISK_EXTENTS,
NULL, 0, &vde, sizeof(vde), &bytesReturned, NULL
)) {
cerr << "Drive " << drive << ":\\ cannot be mapped into physical drive";
continue;
}
cout << "Drive " << drive << ":\\ is on the following physical drives: ";
for (int i = 0; i < vde.NumberOfDiskExtents; ++i) {
cout << vde.Extents[i].DiskNumber << ' ';
}
cout << endl;
}
}
I think that installation of Windows Driver Development Kit is quite a lengthy process, so I've included the declarations one needs to use DeviceIoControl for this task.
Thic WMIC command combination works fine:
wmic volume list brief
Might want to include the old A: and B: drives as you never know who might be using them! I got tired of USB drives bumping my two SDHC drives that are just for Readyboost. I had been assigning them to High letters Z: Y: with a utility that will assign drive letters to devices as you wish. I wondered.... Can I make a Readyboost drive letter A: ? YES! Can I put my second SDHC drive letter as B: ? YES!
I've used Floppy Drives back in the day, never thought that A: or B: would come in handy for Readyboost.
My point is, don't assume A: & B: will not be used by anyone for anything You might even find the old SUBST command being used!
I just ran across this in my RSS Reader today. I've got a cleaner solution for you. This example is in Delphi, but can very easily be converted to C/C++ (It's all Win32).
Query all value names from the following registry location: HKLM\SYSTEM\MountedDevices
One by one, pass them into the following function and you will be returned the device name. Pretty clean and simple! I found this code on a blog here.
function VolumeNameToDeviceName(const VolName: String): String;
var
s: String;
TargetPath: Array[0..MAX_PATH] of WideChar;
bSucceeded: Boolean;
begin
Result := ”;
// VolumeName has a format like this: \\?\Volume{c4ee0265-bada-11dd-9cd5-806e6f6e6963}\
// We need to strip this to Volume{c4ee0265-bada-11dd-9cd5-806e6f6e6963}
s := Copy(VolName, 5, Length(VolName) - 5);
bSucceeded := QueryDosDeviceW(PWideChar(WideString(s)), TargetPath, MAX_PATH) <> 0;
if bSucceeded then
begin
Result := TargetPath;
end
else begin
// raise exception
end;
end;
If you want "physical" access, we're developing this API that will eventually allows you to communicate with storage devices. It's open source and you can see the current code for some information. Check back for more features: https://github.com/virtium/vtStor
Here is a new solution of doing it with doing WMI calls.
Then all you need to do is just to call :
queryAndPrintResult(L"SELECT * FROM Win32_DiskDrive", L"Name");
Make a list of all letters in the US English Alphabet, skipping a & b. "CDEFGHIJKLMNOPQRSTUVWXYZ". Open each of those drives with CreateFile e.g. CreateFile("\\.\C:"). If it does not return INVALID_HANDLE_VALUE then you got a 'good' drive. Next take that handle and run it through DeviceIoControl to get the Disk #. See my related answer for more details.
来源：https://stackoverflow.com/questions/327718/how-to-list-physical-disks