network-connection

Network connection problems in Google Cloud SDK while I have access to google or website like google app engine in my browser

风流意气都作罢 提交于 2020-05-27 09:43:15
问题 I created an account on Google App Engine, then I installed google-cloud-sdk by gcloud init, and get the following error: Pick configuration to use: [1] Re-initialize this configuration [a] with new settings [2] Create a new configuration [3] Switch to and re-initialize existing configuration: [default] Please enter your numeric choice: 1 Your current configuration has been set to: [a] You can skip diagnostics next time by using the following flag: gcloud init --skip-diagnostics Network

hadoop Protocol message tag had invalid wire type

僤鯓⒐⒋嵵緔 提交于 2020-01-14 22:43:30
问题 I Set up hadoop 2.6 cluster using two nodes of 8 cores each on Ubuntu 12.04. sbin/start-dfs.sh and sbin/start-yarn.sh both succeed. And I can see the following after jps on the master node. 22437 DataNode 22988 ResourceManager 24668 Jps 22748 SecondaryNameNode 23244 NodeManager The jps outcome on the slave node is 19693 DataNode 19966 NodeManager I then run the PI example. bin/hadoop jar share/hadoop/mapreduce/hadoop-mapreduce-examples-2.6.0.jar pi 30 100 Which gives me there error-log java

ConnectivityManager.NetworkCallback() -> onAvailable(Network network) method is not triggered when device connects to a internal wifi network

十年热恋 提交于 2020-01-03 18:04:12
问题 I am trying to send telementary data to App Center on out internal wifi network but it is not sending on this network but it does on any external network. When debugging found that Method onAvailable() is not called when device is connected to internal wifi but it does get called when connected to any external wifi. Below code is from App Center SDK : appcenter\utils\NetworkStateHelper.javaNetworkStateHelper.java. Class NetworkStateHelper -> Method reopen() --> public void onAvailable(Network

ConnectivityManager.NetworkCallback() -> onAvailable(Network network) method is not triggered when device connects to a internal wifi network

。_饼干妹妹 提交于 2020-01-03 18:03:40
问题 I am trying to send telementary data to App Center on out internal wifi network but it is not sending on this network but it does on any external network. When debugging found that Method onAvailable() is not called when device is connected to internal wifi but it does get called when connected to any external wifi. Below code is from App Center SDK : appcenter\utils\NetworkStateHelper.javaNetworkStateHelper.java. Class NetworkStateHelper -> Method reopen() --> public void onAvailable(Network

How to test iOS app on supporting IPv6? Apple rejected app as it is not IPv6 compatible

跟風遠走 提交于 2019-12-18 11:50:46
问题 have apps, built 2015 and 2014. How can I test them for IPv6? If my apps doesn't support IPv6, what should I do? My apps are using AFNetworking and Alamofire. I'm connecting mostly to domains ( Ex. api.example.com/v1/...). Only 1 app use IP: (ex: 12.12.12.12:3000/api/v1/...). 回答1: This solution only works if you have an ethernet connection. For creating an iPV6 NAT64 wifi network, follow these steps Step 1 : Open system preferences Step 2 : Open Sharing Step 3 : Click on internet sharing Step

Check for internet connection availability in Swift

最后都变了- 提交于 2019-12-17 02:28:15
问题 Is there a way to check if the internet connection is available using Swift? I know there are many third party libraries to do this but they are all written in Objective-C. I'm looking for a Swift alternative. 回答1: As mentioned in the comments, although its possible to use Objective-C libraries in Swift, I wanted a more pure Swift solution. The existing Apple Reachability class and other third party libraries seemed to be too complicated for me to translate to Swift. I Googled some more and I

ionic2: network connectivity check during splash screen

拜拜、爱过 提交于 2019-12-12 02:08:15
问题 I've been trying hard to figure out how to check for network connectivity while the splashscreen is being displayed.I've searched for the code in many places but most of those articles are outdated. I followed the tutorial that's mentioned here:https://www.thepolyglotdeveloper.com/2016/01/determine-network-availability-in-an-ionic-2-mobile-app/ But then I found out that Network.connection is deprecated and has been replaced by Network.type on the ionic2 website. So I've replaced the word

looking for alternative solution than IPFW for slowing down an internet connection

五迷三道 提交于 2019-12-06 17:02:57
问题 I need to slow down (simulate bad) internet connection, I found some documentation where it was achieved by "ipfw pipe" command , the thing is that in latest MAC OS versions , ipfw was deprecated (and removed)... I was wondering if there are any alternative to the ipfw API ? Does anyone know how latest Network Link Conditioner achieves it? The original previous way which enabled to slow down an internet connection : sudo ipfw pipe 1 config bw 56Kbit/s delay 200 plr 0.2 and to clear the pipe :

How to check network provider name in iOS programming?

天涯浪子 提交于 2019-12-06 13:01:03
问题 I need to check whether device has been connected properly to "My-Wifi" network or not. If it is connected then I will send some data to server otherwise not. Right now I am just checking with the Internet connection, using Reachability class. So how to check that? 回答1: You can make use of CNCopySupportedInterfaces() call. CFArrayRef interfaces = CNCopySupportedInterfaces(); CFIndex count = CFArrayGetCount(interfaces); for (int i = 0; i < count; i++) { CFStringRef interface =

looking for alternative solution than IPFW for slowing down an internet connection

烂漫一生 提交于 2019-12-04 22:34:00
I need to slow down (simulate bad) internet connection, I found some documentation where it was achieved by "ipfw pipe" command , the thing is that in latest MAC OS versions , ipfw was deprecated (and removed)... I was wondering if there are any alternative to the ipfw API ? Does anyone know how latest Network Link Conditioner achieves it? The original previous way which enabled to slow down an internet connection : sudo ipfw pipe 1 config bw 56Kbit/s delay 200 plr 0.2 and to clear the pipe : sudo ipfw delete 1 Thanks. I don't know much about Mac OS (I use Linux myself), but I'll give this a