What are file descriptors, explained in simple terms?

What would be a more simplified description of file descriptors compared to Wikipedia's? Why are they required? Say, take shell processes as an example and how does it apply for it?
Does a process table contain more than one file descriptor. If yes, why?

Tayyab

In simple words, when you open a file, the operating system creates an entry to represent that file and store the information about that opened file. So if there are 100 files opened in your OS then there will be 100 entries in OS (somewhere in kernel). These entries are represented by integers like (...100, 101, 102....). This entry number is the file descriptor. So it is just an integer number that uniquely represents an opened file in operating system. If your process opens 10 files then your Process table will have 10 entries for file descriptors.

Similarly when you open a network socket, it is also represented by an integer and it is called Socket Descriptor. I hope you understand.

Beano

A file descriptor is an opaque handle that is used in the interface between user and kernel space to identify file/socket resources. Therefore, when you use open() or socket() (system calls to interface to the kernel), you are given a file descriptor, which is an integer (it is actually an index into the processes u structure - but that is not important). Therefore, if you want to interface directly with the kernel, using system calls to read(), write(), close() etc. the handle you use is a file descriptor.

There is a layer of abstraction overlaid on the system calls, which is the stdio interface. This provides more functionality/features than the basic system calls do. For this interface, the opaque handle you get is a FILE*, which is returned by the fopen() call. There are many many functions that use the stdio interface fprintf(), fscanf(), fclose(), which are there to make your life easier. In C, stdin, stdout, and stderr are FILE*, which in UNIX respectively map to file descriptors 0, 1 and 2.

Shekhar Kumar

Hear it from the Horse's Mouth : APUE (Richard Stevens).
To the kernel, all open files are referred to by File Descriptors. A file descriptor is a non-negative number.

When we open an existing file or create a new file, the kernel returns a file descriptor to the process. The kernel maintains a table of all open file descriptors, which are in use. The allotment of file descriptors is generally sequential and they are allotted to the file as the next free file descriptor from the pool of free file descriptors. When we closes the file, the file descriptor gets freed and is available for further allotment.
See this image for more details :

When we want to read or write a file, we identify the file with the file descriptor that was returned by open() or create() function call, and use it as an argument to either read() or write().
It is by convention that, UNIX System shells associates the file descriptor 0 with Standard Input of a process, file descriptor 1 with Standard Output, and file descriptor 2 with Standard Error.
File descriptor ranges from 0 to OPEN_MAX. File descriptor max value can be obtained with ulimit -n. For more information, go through 3rd chapter of APUE Book.

Sandeep_black

More points regarding File Descriptor:

File Descriptors (FD) are non-negative integers (0, 1, 2, ...) that are associated with files that are opened.
0, 1, 2 are standard FD's that corresponds to STDIN_FILENO, STDOUT_FILENO and STDERR_FILENO (defined in unistd.h) opened by default on behalf of shell when the program starts.
FD's are allocated in the sequential order, meaning the lowest possible unallocated integer value.
FD's for a particular process can be seen in /proc/$pid/fd (on Unix based systems).

As an addition to other answers, unix considers everything as a file system. Your keyboard is a file that is read only from the perspective of the kernel. The screen is a write only file. Similarly, folders, input-output devices etc are also considered to be files. Whenever a file is opened, say when the device drivers[for device files] requests an open(), or a process opens an user file the kernel allocates a file descriptor, an integer that specifies the access to that file such it being read only, write only etc. [for reference : https://en.wikipedia.org/wiki/Everything_is_a_file ]

Other answers added great stuff. I will add just my 2 cents.

According to Wikipedia we know for sure: a file descriptor is a non-negative integer. The most important thing I think is missing, would be to say:

File descriptors are bound to a process ID.

We know most famous file descriptors are 0, 1 and 2. 0 corresponds to STDIN, 1 to STDOUT, and 2 to STDERR.

Say, take shell processes as an example and how does it apply for it?

Check out this code

#>sleep 1000 &
[12] 14726

We created a process with the id 14726 (PID). Using the lsof -p 14726 we can get the things like this:

COMMAND   PID USER   FD   TYPE DEVICE SIZE/OFF    NODE NAME
sleep   14726 root  cwd    DIR    8,1     4096 1201140 /home/x
sleep   14726 root  rtd    DIR    8,1     4096       2 /
sleep   14726 root  txt    REG    8,1    35000  786587 /bin/sleep
sleep   14726 root  mem    REG    8,1 11864720 1186503 /usr/lib/locale/locale-archive
sleep   14726 root  mem    REG    8,1  2030544  137184 /lib/x86_64-linux-gnu/libc-2.27.so
sleep   14726 root  mem    REG    8,1   170960  137156 /lib/x86_64-linux-gnu/ld-2.27.so
sleep   14726 root    0u   CHR  136,6      0t0       9 /dev/pts/6
sleep   14726 root    1u   CHR  136,6      0t0       9 /dev/pts/6
sleep   14726 root    2u   CHR  136,6      0t0       9 /dev/pts/6

The 4-th column FD and the very next column TYPE correspond to the File Descriptor and the File Descriptor type.

Some of the values for the FD can be:

cwd – Current Working Directory
txt – Text file
mem – Memory mapped file
mmap – Memory mapped device

But the real file descriptor is under:

NUMBER – Represent the actual file descriptor.

The character after the number i.e "1u", represents the mode in which the file is opened. r for read, w for write, u for read and write.

TYPE specifies the type of the file. Some of the values of TYPEs are:

REG – Regular File
DIR – Directory
FIFO – First In First Out

But all file descriptors are CHR – Character special file (or character device file)

Now, we can identify the File Descriptors for STDIN, STDOUT and STDERR easy with lsof -p PID, or we can see the same if we ls /proc/PID/fd.

Note also that file descriptor table that kernel keeps track of is not the same as files table or inodes table. These are separate, as some other answers explained.

You may ask yourself where are these file descriptors physically and what is stored in /dev/pts/6 for instance

sleep   14726 root    0u   CHR  136,6      0t0       9 /dev/pts/6
sleep   14726 root    1u   CHR  136,6      0t0       9 /dev/pts/6
sleep   14726 root    2u   CHR  136,6      0t0       9 /dev/pts/6

Well, /dev/pts/6 lives purely in memory. These are not regular files, but so called character device files. You can check this with: ls -l /dev/pts/6 and they will start with c, in my case crw--w----.

Just to recall most Linux like OS define seven types of files:

Regular files
Directories
Character device files
Block device files
Local domain sockets
Named pipes (FIFOs) and
Symbolic links

Abhishek Kamal

File Descriptors (FD) :

In Linux/Unix, everything is a file. Regular file, Directories, and even Devices are files. Every File has an associated number called File Descriptor (FD).
Your screen also has a File Descriptor. When a program is executed the output is sent to File Descriptor of the screen, and you see program output on your monitor. If the output is sent to File Descriptor of the printer, the program output would have been printed.

Error Redirection :
Whenever you execute a program/command at the terminal, 3 files are always open
1. standard input
2. standard output
3. standard error.
These files are always present whenever a program is run. As explained before a file descriptor, is associated with each of these files.
File                                        File Descriptor
Standard Input STDIN              0
Standard Output STDOUT       1
Standard Error STDERR          2
For instance, while searching for files, one typically gets permission denied errors or some other kind of errors. These errors can be saved to a particular file.
Example 1

$ ls mydir 2>errorsfile.txt

The file descriptor for standard error is 2.
If there is no any directory named as mydir then the output of command will be save to file errorfile.txt
Using "2>" we re-direct the error output to a file named "errorfile.txt"
Thus, program output is not cluttered with errors.

I hope you got your answer.

Any operating system has processes (p's) running, say p1, p2, p3 and so forth. Each process usually makes an ongoing usage of files.

Each process is consisted of a process tree (or a process table, in another phrasing).

Usually, Operating systems represent each file in each process by a number (that is to say, in each process tree/table).

The first file used in the process is file0, second is file1, third is file2, and so forth.

Any such number is a file descriptor.

File descriptors are usually integers (0, 1, 2 and not 0.5, 1.5, 2.5).

Given we often describe processes as "process-tables", and given that tables has rows (entries) we can say that the file descriptor cell in each entry, uses to represent the whole entry.

In a similar way, when you open a network socket, it has a socket descriptor.

In some operating systems, you can run out of file descriptors, but such case is extremely rare, and the average computer user shouldn't worry from that.

File descriptors might be global (process A starts in say 0, and ends say in 1 ; Process B starts say in 2, and ends say in 3) and so forth, but as far as I know, usually in modern operating systems, file descriptors are not global, and are actually process-specific (process A starts in say 0 and ends say in 5, while process B starts in 0 and ends say in 10).

File descriptors

To Kernel all open files are referred to by file descriptors.
A file descriptor is a non - negative integer.
When we open an existing or create a new file, the kernel returns a file descriptor to a process.
When we want to read or write on a file, we identify the file with file descriptor that was retuned by open or create, as an argument to either read or write.
Each UNIX process has 20 file descriptors and it disposal, numbered 0 through 19 but it was extended to 63 by many systems.
The first three are already opened when the process begins 0: The standard input 1: The standard output 2: The standard error output
When the parent process forks a process, the child process inherits the file descriptors of the parent

Addition to above all simplified responses.
If you are working with files in bash script, it's better to use file descriptor.
For example:-
You want to read and write from/to the file "test.txt".
Use the file descriptor as show below

FILE=$1 # give the name of file in the command line
exec 5<>$FILE # '5' here act as the file descriptor
# Reading from the file line by line using file descriptor
while read LINE; do
    echo "$LINE"
done <&5

# Writing to the file using descriptor
echo "Adding the date: `date`" >&5 
exec 5<&- # Closing a file descriptor

Motimahal

File Descriptors are the descriptors to a file. They give links to a file. With the help of them we can read, write and open a file.

来源：https://stackoverflow.com/questions/5256599/what-are-file-descriptors-explained-in-simple-terms

标签

unix

operating-system

file-descriptor