Flashlight Camera2 API | 易学教程

问题

Can I use camera preview and flashlight at the same time in Android Camera2 API?

When I try use CameraManager.setTorchMode(String cameraId, boolean enabled) it's work fine when camera is not opened. But when Camera is open and I try setTorchMode I receive this exception:

CameraService: setTorchMode: torch mode of camera 0 is not available because camera is in use

回答1:

The error is indicating that the camera in question, is already in use.

You need to set the FLASH_MODE and CONTROL_AE_MODE accordingly.

mPreviewRequestBuilder.set(CaptureRequest.FLASH_MODE, CaptureRequest.FLASH_MODE_OFF);
mPreviewRequestBuilder.set(CaptureRequest.CONTROL_AE_MODE, CaptureRequest.CONTROL_AE_MODE_ON);
// Then Send request to current camera session
mCaptureSession.setRepeatingRequest(mPreviewRequestBuilder.build(), null, null);

回答2:

No, they're mutually exclusive.

The camera device needs exclusive control of the flash while the camera is open, to ensure it can fire it as needed for pictures and so on.

If you want to turn on the torch while the camera is open, then use the camera API's flash mode setting. For the new camera2 API, that's setting the auto-exposure mode to just ON (CONTROL_AE_MODE_ON) and the flash mode to TORCH (FLASH_MODE_TORCH). And for the old camera API, that's Parameters.setFlashMode.

回答3:

I found solution:

CaptureRequest.Builder builder = cameraDevice.createCaptureRequest(CameraDevice.TEMPLATE_PREVIEW);
builder.set(CaptureRequest.FLASH_MODE, enable ? CameraMetadata.FLASH_MODE_TORCH : CameraMetadata.FLASH_MODE_OFF);
CaptureRequest request = builder.build();
cameraCaptureSession.capture(request, null, null);

回答4:

Setting both FLASH_MODE and AE_MODE is important. Below is the working piece of code:

public void toggleFlashMode(boolean enable){
try {
            if (mCameraType.equals(CameraType.BACK)) {
                if (enable) {
                    mPreviewRequestBuilder.set(CaptureRequest.FLASH_MODE, CaptureRequest.FLASH_MODE_TORCH);
                    mPreviewRequestBuilder.set(CaptureRequest.CONTROL_AE_MODE, CaptureRequest.CONTROL_AE_MODE_ON);
                } else {
                    mPreviewRequestBuilder.set(CaptureRequest.FLASH_MODE, CaptureRequest.FLASH_MODE_OFF);
                    mPreviewRequestBuilder.set(CaptureRequest.CONTROL_AE_MODE, CaptureRequest.CONTROL_AE_MODE_OFF);
                }
                mCaptureSession.setRepeatingRequest(mPreviewRequestBuilder.build(), null, null);
            }
        } catch (CameraAccessException e) {
            e.printStackTrace();
        }
}

来源：https://stackoverflow.com/questions/33324647/flashlight-camera2-api

标签

android

flashlight

camera2