问题
I am trying to get started with using Operations in a side project rather than having closure-based callbacks littered throughout my networking code to help eliminate nested calls. So I was doing some reading on the subject, and I came across this implementation:
open class AsynchronousOperation: Operation {
// MARK: - Properties
private let stateQueue = DispatchQueue(label: \"asynchronous.operation.state\", attributes: .concurrent)
private var rawState = OperationState.ready
private dynamic var state: OperationState {
get {
return stateQueue.sync(execute: {
rawState
})
}
set {
willChangeValue(forKey: \"state\")
stateQueue.sync(flags: .barrier, execute: {
rawState = newValue
})
didChangeValue(forKey: \"state\")
}
}
public final override var isReady: Bool {
return state == .ready && super.isReady
}
public final override var isExecuting: Bool {
return state == .executing
}
public final override var isFinished: Bool {
return state == .finished
}
public final override var isAsynchronous: Bool {
return true
}
// MARK: - NSObject
private dynamic class func keyPathsForValuesAffectingIsReady() -> Set<String> {
return [\"state\"]
}
private dynamic class func keyPathsForValuesAffectingIsExecuting() -> Set<String> {
return [\"state\"]
}
private dynamic class func keyPathsForValuesAffectingIsFinished() -> Set<String> {
return [\"state\"]
}
// MARK: - Foundation.Operation
public final override func start() {
super.start()
if isCancelled {
finish()
return
}
state = .executing
execute()
}
// MARK: - Public
/// Subclasses must implement this to perform their work and they must not call `super`. The default implementation of this function throws an exception.
open func execute() {
fatalError(\"Subclasses must implement `execute`.\")
}
/// Call this function after any work is done or after a call to `cancel()` to move the operation into a completed state.
public final func finish() {
state = .finished
}
}
@objc private enum OperationState: Int {
case ready
case executing
case finished
}
There are some implementation details of this Operation subclass that I would like some help in understanding.
What is the purpose of the
stateQueueproperty? I see it being used bygetandsetof thestatecomputed property, but I can\'t find any documentation that explains thesync:flags:executeandsync:executemethods that they use.What is the purpose of the three class methods in the
NSObjectsection that return[\"state\"]? I don\'t see them being used anywhere. I found, inNSObject,class func keyPathsForValuesAffectingValue(forKey key: String) -> Set<String>, but that doesn\'t seem to help me understand why these methods are declared.
回答1:
You said:
- What is the purpose of the
stateQueueproperty? I see it being used by get and set of thestatecomputed property, but I can't find any documentation that explains thesync:flags:executeandsync:executemethods that they use.
This code "synchronizes" access to a property to make it thread safe. Regarding why you need to do that, see the Operation documentation, which advises:
Multicore Considerations
... When you subclass
NSOperation, you must make sure that any overridden methods remain safe to call from multiple threads. If you implement custom methods in your subclass, such as custom data accessors, you must also make sure those methods are thread-safe. Thus, access to any data variables in the operation must be synchronized to prevent potential data corruption. For more information about synchronization, see Threading Programming Guide.
Regarding the exact use of this concurrent queue for synchronization, this is known as the "reader-writer" pattern. This basic concept of reader-writer pattern is that reads can happen concurrent with respect to each other (hence sync, with no barrier), but writes must never be performed concurrently with respect to any other access of that property (hence async with barrier).
For example, you might implement a reader-writer for thread-safety on an array like so:
class ThreadSafeArray<T> {
private var values: [T]
private let queue = DispatchQueue(label: "...", attributes: .concurrent)
init(_ values: [T]) {
self.values = values
}
func reader<U>(block: () throws -> U) rethrows -> U {
return try queue.sync {
try block()
}
}
func writer(block: @escaping (inout [T]) -> Void) {
queue.async(flags: .barrier) {
block(&self.values)
}
}
// e.g. you might use `reader` and `writer` like the following:
subscript(_ index: Int) -> T {
get { reader { values[index] } }
set { writer { $0[index] = newValue } }
}
func append(_ value: T) {
writer { $0.append(value) }
}
func remove(at index: Int) {
writer { $0.remove(at: index)}
}
}
Obviously, the use of reader-writer in this Operation subclass is even simpler, but the above illustrates the pattern.
You also asked:
- What is the purpose of the three class methods in the
NSObjectsection that return["state"]? I don't see them being used anywhere. I found, inNSObject,class func keyPathsForValuesAffectingValue(forKey key: String) -> Set<String>, but that doesn't seem to help me understand why these methods are declared.
These are just methods that ensure that changes to the state property trigger KVN for properties isReady, isExecuting and isFinished. The KVN of these three keys is critical for the correct functioning of asynchronous operations. Anyway, this syntax is outlined in the Key-Value Observing Programming Guide: Registering Dependent Keys.
The keyPathsForValuesAffectingValue method you found is related. You can either register dependent keys using that method, or have the individual methods as shown in your original code snippet.
BTW, here is a revised version of the AsynchronousOperation class you provided, namely:
You must not call
super.start(). As the start documentation says (emphasis added):If you are implementing a concurrent operation, you must override this method and use it to initiate your operation. Your custom implementation must not call
superat any time.Add
@objcrequired in Swift 4.Renamed
executeto usemain, which is the convention forOperationsubclasses.It is inappropriate to declare
isReadyas afinalproperty. Any subclass should have the right to further refine itsisReadylogic (though we admittedly rarely do so).Use
#keyPathto make code a little more safe/robust.You don't need to do manual KVN when using
dynamicproperty. The manual calling ofwillChangeValueanddidChangeValueis not needed in this example.Change
finishso that it only moves to.finishedstate if not already finished.
Thus:
public class AsynchronousOperation: Operation {
/// State for this operation.
@objc private enum OperationState: Int {
case ready
case executing
case finished
}
/// Concurrent queue for synchronizing access to `state`.
private let stateQueue = DispatchQueue(label: Bundle.main.bundleIdentifier! + ".rw.state", attributes: .concurrent)
/// Private backing stored property for `state`.
private var _state: OperationState = .ready
/// The state of the operation
@objc private dynamic var state: OperationState {
get { return stateQueue.sync { _state } }
set { stateQueue.async(flags: .barrier) { self._state = newValue } }
}
// MARK: - Various `Operation` properties
open override var isReady: Bool { return state == .ready && super.isReady }
public final override var isExecuting: Bool { return state == .executing }
public final override var isFinished: Bool { return state == .finished }
public final override var isAsynchronous: Bool { return true }
// KVN for dependent properties
open override class func keyPathsForValuesAffectingValue(forKey key: String) -> Set<String> {
if ["isReady", "isFinished", "isExecuting"].contains(key) {
return [#keyPath(state)]
}
return super.keyPathsForValuesAffectingValue(forKey: key)
}
// Start
public final override func start() {
if isCancelled {
state = .finished
return
}
state = .executing
main()
}
/// Subclasses must implement this to perform their work and they must not call `super`. The default implementation of this function throws an exception.
open override func main() {
fatalError("Subclasses must implement `main`.")
}
/// Call this function to finish an operation that is currently executing
public final func finish() {
if !isFinished { state = .finished }
}
}
回答2:
When using an updated code snippet from Rob's answer, one should be aware of possibility of a bug, caused by this change:
- Change finish so that it only moves to .finished state if isExecuting.
The above goes against Apple docs:
In addition to simply exiting when an operation is cancelled, it is also important that you move a cancelled operation to the appropriate final state. Specifically, if you manage the values for the finished and executing properties yourself (perhaps because you are implementing a concurrent operation), you must update those properties accordingly. Specifically, you must change the value returned by finished to YES and the value returned by executing to NO. You must make these changes even if the operation was cancelled before it started executing.
This will cause a bug in a few cases. For example, if Operation Queue with "maxConcurrentOperationCount = 1" gets 3 async operations A B and C, then if all operations are cancelled during A, C will not get executed and the queue will be stuck on operation B.
回答3:
About your first question: stateQueue lock your operation when writing a new value to you operation state by:
return stateQueue.sync(execute: {
rawState
})
And
stateQueue.sync(flags: .barrier, execute: {
rawState = newValue
})
as your operation is asynchronous so before read or write one state another state can be called. Like you want to write isExecution but in the mean time isFinished already called. So to avoid this scenario stateQueue lock the operation state to be read and write until it finished its previous call. Its work like Atomic. Rather use dispatch queue you can use an extension to NSLock to simplify executing critical code from Advanced NSOperations sample code in WWDC 2015 https://developer.apple.com/videos/play/wwdc2015/226/ from https://developer.apple.com/sample-code/wwdc/2015/downloads/Advanced-NSOperations.zip and you can implement like following:
private let stateLock = NSLock()
private dynamic var state: OperationState {
get {
return stateLock.withCriticalScope{ rawState }
}
set {
willChangeValue(forKey: "state")
stateLock.withCriticalScope {
rawState = newValue
}
didChangeValue(forKey: "state")
}
}
About your second question: Its a KVO notification for the read only property isReady, isExecuting, isFinished to manage the operation state. You can read this: http://nshipster.com/key-value-observing post till the end for better understanding about KVO.
来源：https://stackoverflow.com/questions/43561169/trying-to-understand-asynchronous-operation-subclass