What do Clustered and Non clustered index actually mean?

问题

I have a limited exposure to DB and have only used DB as an application programmer. I want to know about Clustered and Non clustered indexes. I googled and what I found was :

A clustered index is a special type of index that reorders the way records in the table are physically stored. Therefore table can have only one clustered index. The leaf nodes of a clustered index contain the data pages. A nonclustered index is a special type of index in which the logical order of the index does not match the physical stored order of the rows on disk. The leaf node of a nonclustered index does not consist of the data pages. Instead, the leaf nodes contain index rows.

What I found in SO was What are the differences between a clustered and a non-clustered index?.

Can someone explain this in plain English?

回答1:

With a clustered index the rows are stored physically on the disk in the same order as the index. Therefore, there can be only one clustered index.

With a non clustered index there is a second list that has pointers to the physical rows. You can have many non clustered indices, although each new index will increase the time it takes to write new records.

It is generally faster to read from a clustered index if you want to get back all the columns. You do not have to go first to the index and then to the table.

Writing to a table with a clustered index can be slower, if there is a need to rearrange the data.

回答2:

A clustered index means you are telling the database to store close values actually close to one another on the disk. This has the benefit of rapid scan / retrieval of records falling into some range of clustered index values.

For example, you have two tables, Customer and Order:

Customer
----------
ID
Name
Address

Order
----------
ID
CustomerID
Price

If you wish to quickly retrieve all orders of one particular customer, you may wish to create a clustered index on the "CustomerID" column of the Order table. This way the records with the same CustomerID will be physically stored close to each other on disk (clustered) which speeds up their retrieval.

P.S. The index on CustomerID will obviously be not unique, so you either need to add a second field to "uniquify" the index or let the database handle that for you but that's another story.

Regarding multiple indexes. You can have only one clustered index per table because this defines how the data is physically arranged. If you wish an analogy, imagine a big room with many tables in it. You can either put these tables to form several rows or pull them all together to form a big conference table, but not both ways at the same time. A table can have other indexes, they will then point to the entries in the clustered index which in its turn will finally say where to find the actual data.

回答3:

In SQL Server row oriented storage both clustered and nonclustered indexes are organized as B trees.

(Image Source)

The key difference between clustered indexes and non clustered indexes is that the leaf level of the clustered index is the table. This has two implications.

The rows on the clustered index leaf pages always contains something for each of the (non sparse) columns in the table (either the value, or a pointer to the actual value).
The clustered index is the primary copy of a table.

Non clustered indexes can also do point 1 by using the INCLUDE clause (Since SQL Server 2005) to explicitly include all non key columns but they are secondary representations and there is always another copy of the data around (the table itself).

CREATE TABLE T
(
A INT,
B INT,
C INT,
D INT
)

CREATE UNIQUE CLUSTERED INDEX ci ON T(A,B)
CREATE UNIQUE NONCLUSTERED INDEX nci ON T(A,B) INCLUDE (C,D)

The two indexes above will be nearly identical. With the upper level index pages containing values for the key columns A,B and the leaf level pages containing A,B,C,D

There can be only one clustered index per table, because the data rows themselves can be sorted in only one order.

The above quote from SQL Server books online causes much confusion

In my opinion it would be much better phrased as.

There can be only one clustered index per table, because the leaf level rows of the clustered index are the table rows.

The books online quote is not incorrect but you should be clear that the "sorting" of both non clustered and clustered indices is logical not physical. If you read the pages at leaf level by following the linked list and read the rows on the page in slot array order then you will read the index rows in sorted order but physically the pages may not be sorted. The commonly held belief that with a clustered index the rows are always stored physically on the disk in the same order as the index key is false.

This would be an absurd implementation. For example if a row is inserted into the middle of a 4GB table SQL Server does not have to copy 2GB of data up in the file to make room for the newly inserted row .

Instead a page split occurs. Each page at the leaf level of both clustered and non clustered indexes has the address (File:Page) of the next and previous page in logical key order. These pages need not be either contiguous or in key order.

e.g. the linked page chain might be 1:2000 <-> 1:157 <-> 1:7053

When a page split happens a new page is allocated from anywhere in the filegroup (from either a mixed extent, for small tables, or a non empty uniform extent belonging to that object or a newly allocated uniform extent). This might not even be in the same file if the file group contains more than one.

The degree to which the logical order and contiguity differs from the idealised physical version is the degree of logical fragmentation.

In a newly created database with a single file I ran the following.

CREATE TABLE T
  (
     X TINYINT NOT NULL,
     Y CHAR(3000) NULL
  );

CREATE CLUSTERED INDEX ix
  ON T(X);

GO

--Insert 100 rows with values 1 - 100 in random order
DECLARE @C1 AS CURSOR,
        @X  AS INT

SET @C1 = CURSOR FAST_FORWARD
FOR SELECT number
    FROM   master..spt_values
    WHERE  type = 'P'
           AND number BETWEEN 1 AND 100
    ORDER  BY CRYPT_GEN_RANDOM(4)

OPEN @C1;

FETCH NEXT FROM @C1 INTO @X;

WHILE @@FETCH_STATUS = 0
  BEGIN
      INSERT INTO T (X)
      VALUES        (@X);

      FETCH NEXT FROM @C1 INTO @X;
  END

Then checked the page layout with

SELECT page_id,
       X,
       geometry::Point(page_id, X, 0).STBuffer(1)
FROM   T
       CROSS APPLY sys.fn_PhysLocCracker( %% physloc %% )
ORDER  BY page_id

Results were all over the place. The first row in key order (with value 1 - highlighted with arrow below) was on nearly the last physical page.

Fragmentation can be reduced or removed by rebuilding or reorganising an index to increase the correlation between logical order and physical order.

After running

ALTER INDEX ix ON T REBUILD;

I got the following

If the table has no clustered index it is called a heap.

Non clustered indexes can be built on either a heap or a clustered index. They always contain a row locator back to the base table. In the case of a heap this is a physical row identifier (rid) and consists of three components (File:Page:Slot). In the case of a Clustered index the row locator is logical (the clustered index key).

For the latter case if the non clustered index already naturally includes the CI key column(s) either as NCI key columns or INCLUDE-d columns then nothing is added. Otherwise the missing CI key column(s) silently get added in to the NCI.

SQL Server always ensures that the key columns are unique for both types of index. The mechanism in which this is enforced for indexes not declared as unique differs between the two index types however.

Clustered indexes get a uniquifier added for any rows with key values that duplicate an existing row. This is just an ascending integer.

For non clustered indexes not declared as unique SQL Server silently adds the row locator in to the non clustered index key. This applies to all rows, not just those that are actually duplicates.

The clustered vs non clustered nomenclature is also used for column store indexes. The paper Enhancements to SQL Server Column Stores states

Although column store data is not really "clustered" on any key, we decided to retain the traditional SQL Server convention of referring to the primary index as a clustered index.

回答4:

I realize this is a very old question, but I thought I would offer an analogy to help illustrate the fine answers above.

CLUSTERED INDEX

If you walk into a public library, you will find that the books are all arranged in a particular order (most likely the Dewey Decimal System, or DDS). This corresponds to the "clustered index" of the books. If the DDS# for the book you want was 005.7565 F736s, you would start by locating the row of bookshelves that is labeled 001-099 or something like that. (This endcap sign at the end of the stack corresponds to an "intermediate node" in the index.) Eventually you would drill down to the specific shelf labelled 005.7450 - 005.7600, then you would scan until you found the book with the specified DDS#, and at that point you have found your book.

NON-CLUSTERED INDEX

But if you didn't come into the library with the DDS# of your book memorized, then you would need a second index to assist you. In the olden days you would find at the front of the library a wonderful bureau of drawers known as the "Card Catalog". In it were thousands of 3x5 cards -- one for each book, sorted in alphabetical order (by title, perhaps). This corresponds to the "non-clustered index". These card catalogs were organized in a hierarchical structure, so that each drawer would be labeled with the range of cards it contained (Ka - Kl, for example; i.e., the "intermediate node"). Once again, you would drill in until you found your book, but in this case, once you have found it (i.e, the "leaf node"), you don't have the book itself, but just a card with an index number (the DDS#) with which you could find the actual book in the clustered index.

Of course, nothing would stop the librarian from photocopying all the cards and sorting them in a different order in a separate card catalog. (Typically there were at least two such catalogs: one sorted by author name, and one by title.) In principle, you could have as many of these "non-clustered" indexes as you want.

回答5:

Find below some characteristics of clustered and non-clustered indexes:

Clustered Indexes

Clustered indexes are indexes that uniquely identify the rows in an SQL table.
Every table can have exactly one clustered index.
You can create a clustered index that covers more than one column. For example: create Index index_name(col1, col2, col.....).
By default, a column with a primary key already has a clustered index.

Non-clustered Indexes

Non-clustered indexes are like simple indexes. They are just used for fast retrieval of data. Not sure to have unique data.

回答6:

A very simple, non-technical rule-of-thumb would be that clustered indexes are usually used for your primary key (or, at least, a unique column) and that non-clustered are used for other situations (maybe a foreign key). Indeed, SQL Server will by default create a clustered index on your primary key column(s). As you will have learnt, the clustered index relates to the way data is physically sorted on disk, which means it's a good all-round choice for most situations.

回答7:

Clustered Index

A clustered index determine the physical order of DATA in a table.For this reason a table have only 1 clustered index.

"dictionary" No need of any other Index, its already Index according to words

Nonclustered Index

A non clustered index is analogous to an index in a Book.The data is store in one place. the index is store in another place and the index have pointers to the storage location of the data.For this reason a table have more than 1 Nonclustered index.

"Chemistry book" at staring there is a separate index to point Chapter location and At the "END" there is another Index pointing the common WORDS location

回答8:

Clustered Index

Clustered indexes sort and store the data rows in the table or view based on their key values. These are the columns included in the index definition. There can be only one clustered index per table, because the data rows themselves can be sorted in only one order.

The only time the data rows in a table are stored in sorted order is when the table contains a clustered index. When a table has a clustered index, the table is called a clustered table. If a table has no clustered index, its data rows are stored in an unordered structure called a heap.

Nonclustered

Nonclustered indexes have a structure separate from the data rows. A nonclustered index contains the nonclustered index key values and each key value entry has a pointer to the data row that contains the key value. The pointer from an index row in a nonclustered index to a data row is called a row locator. The structure of the row locator depends on whether the data pages are stored in a heap or a clustered table. For a heap, a row locator is a pointer to the row. For a clustered table, the row locator is the clustered index key.

You can add nonkey columns to the leaf level of the nonclustered index to by-pass existing index key limits, and execute fully covered, indexed, queries. For more information, see Create Indexes with Included Columns. For details about index key limits see Maximum Capacity Specifications for SQL Server.

Reference: https://docs.microsoft.com/en-us/sql/relational-databases/indexes/clustered-and-nonclustered-indexes-described

回答9:

Let me offer a textbook definition on "clustering index", which is taken from 15.6.1 from Database Systems: The Complete Book:

We may also speak of clustering indexes, which are indexes on an attribute or attributes such that all of tuples with a fixed value for the search key of this index appear on roughly as few blocks as can hold them.

To understand the definition, let's take a look at Example 15.10 provided by the textbook:

A relation R(a,b) that is sorted on attribute a and stored in that order, packed into blocks, is surely clusterd. An index on a is a clustering index, since for a given a-value a1, all the tuples with that value for a are consecutive. They thus appear packed into blocks, execept possibly for the first and last blocks that contain a-value a1, as suggested in Fig.15.14. However, an index on b is unlikely to be clustering, since the tuples with a fixed b-value will be spread all over the file unless the values of a and b are very closely correlated.

Note that the definition does not enforce the data blocks have to be contiguous on the disk; it only says tuples with the search key are packed into as few data blocks as possible.

A related concept is clustered relation. A relation is "clustered" if its tuples are packed into roughly as few blocks as can possibly hold those tuples. In other words, from a disk block perspective, if it contains tuples from different relations, then those relations cannot be clustered (i.e., there is a more packed way to store such relation by swapping the tuples of that relation from other disk blocks with the tuples the doesn't belong to the relation in the current disk block). Clearly, R(a,b) in example above is clustered.

To connect two concepts together, a clustered relation can have a clustering index and nonclustering index. However, for non-clustered relation, clustering index is not possible unless the index is built on top of the primary key of the relation.

"Cluster" as a word is spammed across all abstraction levels of database storage side (three levels of abstraction: tuples, blocks, file). A concept called "clustered file", which describes whether a file (an abstraction for a group of blocks (one or more disk blocks)) contains tuples from one relation or different relations. It doesn't relate to the clustering index concept as it is on file level.

However, some teaching material likes to define clustering index based on the clustered file definition. Those two types of definitions are the same on clustered relation level, no matter whether they define clustered relation in terms of data disk block or file. From the link in this paragraph,

An index on attribute(s) A on a file is a clustering index when: All tuples with attribute value A = a are stored sequentially (= consecutively) in the data file

Storing tuples consecutively is the same as saying "tuples are packed into roughly as few blocks as can possibly hold those tuples" (with minor difference on one talking about file, the other talking about disk). It's because storing tuple consecutively is the way to achieve "packed into roughly as few blocks as can possibly hold those tuples".

回答10:

Clustered Index: Primary Key constraint creates clustered Index automatically if no clustered Index already exists on the table. Actual data of clustered index can be stored at leaf level of Index.

Non Clustered Index: Actual data of non clustered index is not directly found at leaf node, instead it has to take an additional step to find because it has only values of row locators pointing towards actual data. Non clustered Index can't be sorted as clustered index. There can be multiple non clustered indexes per table, actually it depends on the sql server version we are using. Basically Sql server 2005 allows 249 Non Clustered Indexes and for above versions like 2008, 2016 it allows 999 Non Clustered Indexes per table.

来源：https://stackoverflow.com/questions/1251636/what-do-clustered-and-non-clustered-index-actually-mean

标签

sql-server

performance

indexing

clustered-index

non-clustered-index